journal article·2018-01Open access

Effect of hot cross rolling on the microstructure and mechanical properties of an Fe-14Cr ODS ferritic steel

J. Macías-Delgado, T. Leguey, V. de Castro

Abstract

Abstract Oxide dispersion strengthened (ODS) reduced activation ferritic steels are leading candidates to become part of the structure of the first wall/blanket of future fusion reactors. Their major drawback is their poor toughness, which must be improved. In this work, an ODS ferritic steel having nominal composition Fe–14Cr–2W–0.2Ti–0.55 Fe2Y (wt%), produced by mechanical alloying of prealloyed powders with Fe2Y intermetallic particles and consolidated by hot isostatic pressing, was subjected to either thermal treatments at high temperature or hot cross rolling in an attempt to investigate the effectiveness of such post-consolidation thermomechanical treatments. Its microstructure, nanoparticle dispersion and mechanical properties were analysed and correlated on each condition. As compared with the annealing treatments hot cross rolling led to a significant decrease in the grain size as well as a slight decrease in the size of some of the secondary phases present in the material. Also, the impact and tensile behaviour was improved over the whole temperature range studied.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fusion materials and technologies · Nuclear Materials and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Influence of mechanical alloying atmospheres on the microstructures and mechanical properties of 15Cr ODS steels10.5516/NET.07.2013.096 ↗
2. Tensile properties and deformation mechanisms of a 14Cr ODS ferritic steel10.1016/j.jnucmat.2010.07.027 ↗
3. Gragg, Tensile and fracture toughness properties of the nanostructured oxide dispersion strengthened ferritic alloy 13Cr–1W–0.3Ti–0.3Y2O310.1016/j.jnucmat.2010.12.066 ↗
4. Effect of thermo-mechanical treatments on the microstructure and mechanical properties of an ODS ferritic steel10.1016/j.jnucmat.2011.03.006 ↗
5. The influence of thermomechanical processing on the microstructure and mechanical properties of 13.5Cr ODS steels10.1016/j.fusengdes.2013.04.005 ↗
6. Direct correlation between morphology of (Fe,Cr)23C6 precipitates and impact behavior of ODS steels10.1016/j.jnucmat.2007.03.150 ↗
7. Influence of hot rolling and high speed hydrostatic extrusion on the microstructure and mechanical properties of an ODS RAF steel10.1016/j.jnucmat.2010.09.019 ↗
8. Developing structural, high-heat flux and plasma facing materials for a near-term DEMO fusion power plant: The EU assessment10.1016/j.jnucmat.2014.06.014 ↗
9. Mechanical behaviour of ferritic ODS steels – temperature dependency and anisotropy10.1016/j.jnucmat.2012.05.048 ↗
10. M. Rout, S.K. Pal, S.B. Singh, Modern Manufacturing Engineering, Cross Rolling: A Metal Forming Process, 2, 2015, pp. 41–64.10.1007/978-3-319-20152-8_2 ↗
11. Process development for 9Cr nanostructured ferritic alloy (NFA) with high fracture toughness10.1016/j.jnucmat.2013.10.007 ↗
12. Fracture behavior of 9Cr nanostructured ferritic alloy with improved fracture toughness10.1016/j.jnucmat.2014.03.007 ↗
13. Tensile deformation and fracture properties of a 14YWT nanostructured ferritic alloy10.1016/j.msea.2016.08.051 ↗
14. On delamination toughening of a 14YWT nanostructured ferritic alloy10.1016/j.actamat.2017.06.041 ↗
15. Microstructure and tensile properties of ODS ferritic steels mechanically alloyed with Fe2Y
16. Influence of Y2O3 and Fe2Y additions on the formation of nano-scale oxide particles and the mechanical properties of an ODS RAF steel10.1016/j.fusengdes.2011.01.023 ↗
17. EELS log-ratio technique for specimen-thickness measurement in the TEM10.1002/jemt.1060080206 ↗
18. Microstructure and tensile properties of oxide dispersion strengthened Fe–14Cr–0.3Y2O3 and Fe–14Cr–2W–0.3Ti–0.3Y2O310.1016/j.jnucmat.2012.11.001 ↗
19. Chemical and microstructural evolution on ODS Fe–14CrWTi steel during manufacturing stages10.1016/j.jnucmat.2011.10.042 ↗
20. Long-termthermal-aging stability of a 16Cr-oxide dispersion strengthened ferritic steel at 973K10.1016/j.matdes.2015.10.138 ↗
21. Microstructural anisotropy of ferritic ODS alloys after different production routes10.1016/j.fusengdes.2015.05.002 ↗
22. The influence of thermomechanical processing on the microstructure and mechanical properties of 13.5Cr ODS steels10.1016/j.fusengdes.2013.04.005 ↗
23. Manufacturing and microstructural evolution of mechanically alloyed oxide dispersion strengthened superalloys10.1002/1527-2648(200109)3:9<647::AID-ADEM647>3.0.CO;2-4 ↗
24. Effects of cryomilling on the microstructures and high temperature mechanical properties of oxide dispersion strengthened steel10.1016/j.jnucmat.2015.01.032 ↗
25. Microstructure examination of Fe–14Cr ODS ferritic steels produced through different processing routes10.1016/j.jnucmat.2014.04.004 ↗
26. Stability of nanoscale secondary phases in an oxide dispersion strengthened Fe–12Cr alloy10.1016/j.actamat.2011.03.017 ↗
27. Effect of the milling atmosphere on the microstructure and mechanical properties of a ODS Fe–14Cr model alloy10.1016/j.msea.2016.06.054 ↗
28. Study of the deformation mechanisms in a Fe–14% Cr ODS alloy10.1016/j.jnucmat.2011.10.046 ↗