journal article·2017-12

The effect of pre-annealing on defects, microstructure and recrystallization of ultra-fine grained Al produced by high-pressure torsion

Mehrnoosh Naderi, Martin Peterlechner, Sergiy V. Divinski, Gerhard Wilde

Publisher page

Abstract

Abstract The defect accumulation, thermal expansion, microhardness and microstructure are investigated for severely plastically deformed technically pure Al (Al-base alloy of the 1050 series) as a function of initial state and post-deformation annealing treatments. Coarse grained as-cast and heat-treated states are deformed via high-pressure torsion. The excess volume release upon subsequent annealing is measured by dilatometry employing a constant heating rate and two characteristic sub-stages are revealed. The corresponding microstructure changes are further investigated by transmission electron microscopy. A strong impact of the initial state on the microstructure and the properties of ultrafine grained Al is established. The dilatometric length changes of ultrafine grained Al under annealing are related to the formation of Fe-rich precipitates as well as to the annihilation of deformation-induced defects.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Wilde · 2009
2. Principles of equal-channel angular pressing as a processing tool for grain refinement
3. Extreme grain refinement by severe plastic deformation: a wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
4. Structure and mechanical properties of ultrafine-grained metals10.1016/S0921-5093(97)00183-4 ↗
5. Equal-channel angular pressing of commercial aluminum alloys: grain refinement, thermal stability and tensile properties10.1007/s11661-000-0011-8 ↗
6. Paradox of strength and ductility in metals processed bysevere plastic deformation10.1557/JMR.2002.0002 ↗
7. Deformation induced vacancies with severe plastic deformation: measurements and models10.4028/www.scientific.net/MSF.503-504.57 ↗
8. Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing10.1016/S1359-6462(02)00282-8 ↗
9. Lattice defect investigation of ECAP-Cu by means of X-ray line profile analysis, calorimetry and electrical resistometry10.1016/j.msea.2005.08.070 ↗
10. Applications of differential scanning calorimetry on materials subjected by severe plastic deformation10.4028/www.scientific.net/MSF.584-586.255 ↗
11. Recrystallization kinetics of ultrafine-grained Ni studied by dilatometry
12. Dilatometric analysis of aluminium alloy with submicrometre grained structure10.1016/0956-716X(92)90002-V ↗
13. Effect of the Zener-Hollomon parameter on the microstructures and mechanical properties of Cu subjected to plastic deformation10.1016/j.actamat.2008.10.021 ↗
14. A two step SPD processing of ultrafine-grained titanium10.1016/S0965-9773(99)00384-0 ↗
15. Nitriding iron at lower temperatures10.1126/science.1080216 ↗
16. Cyclic deformation of nanocrystalline and ultrafine-grained nickel10.1016/j.actamat.2008.11.011 ↗
17. Finite element analysis of deformation behaviour of metals during equal channel multi-angular pressing10.1016/S0921-5093(01)01500-3 ↗
18. Combined volumetric, energetic and microstructural defect analysis of ECAP-processed Ni10.1016/j.actamat.2015.10.004 ↗
19. Effect of heat treatment on diffusion, internal friction, microstructure and mechanical properties of ultrafine grained nickel severely deformed by equal channel angular pressing10.1016/j.actamat.2014.08.064 ↗
20. Phase transitions induced by severe plastic deformation: steady-state and equifinality10.3139/146.111215 ↗
21. Grain boundary excess free volume – direct thermodynamic measurement10.1007/s10853-006-0563-0 ↗
22. P.A. Stadelmann, JEMS - EMS java version, 2004.
23. Network of porosity formed in ultrafine-grained copper produced by equal channel angular pressing10.1103/PhysRevLett.102.165501 ↗
24. Ultra fast diffusion and internal porosity in ultra fine grain copper–lead alloy prepared by equal channel angular pressing10.1016/j.scriptamat.2009.03.029 ↗
25. Network of ultra-fast transport channels in severely deformed nanocrystalline metals10.1063/1.3211966 ↗
26. Percolating porosity in ultrafine grained copper processed by high-pressure torsion10.1063/1.4829705 ↗