journal article·2017-09

Effect of the cooling rate on the mechanical properties of Ti-Ni-Cu-Zr-based crystal/glassy alloys

J. Jiang, S. Ketov, H. Kato, D.V. Louzguine-Luzgin

Publisher page

Abstract

Abstract Ti-Ni-Cu-Zr-based crystal/glassy dual-phase alloy samples with different sizes and good mechanical properties were manufactured. The structure of these samples was examined via X-ray Diffraction, Scanning Electron Microscopy, and Transmission Electron Microscopy. The developed dual-phase structure alloys combine the high strength of glassy alloys and plasticity of crystalline alloys. Plastic deformation was enhanced by this dual-phase structure. Mechanical characterization of the alloys revealed three deformation stages, namely a martensitic transformation, dislocation slip in a crystalline phase, and shear deformation of the glassy matrix. Two types of effects involving the martensitic transformation were observed: superelastic behavior and the transformation induced plasticity (TRIP) effect, which provide an additional deformation mechanism and lead to a significant increase in the plasticity of these dual-phase samples. The results indicate that the fraction of glassy phase occurring in large rods formed at lower cooling rates is lower than that occurring in smaller rods; therefore, the deformation-induced martensitic transformation of the crystalline cP2 phase in the large samples occurs at lower stresses.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Shape Memory Alloy Transformations · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Non-crystalline structure in solidified gold-silicon alloys10.1038/187869b0 ↗
2. Suryanarayana · 2011
3. Stabilization of metallic supercooled liquid and bulk amorphous alloys10.1016/S1359-6454(99)00300-6 ↗
4. Fabrication, properties and applications of bulk glassy alloys in late transition metal-based systems10.1016/j.msea.2006.02.416 ↗
5. Super plastic bulk metallic glasses at room temperature10.1126/science.1136726 ↗
6. Bulk metallic glasses. Formation, structure, properties, and applications10.1016/B978-0-444-59593-5.00003-9 ↗
7. Metallic glass matrix composites10.1016/j.mser.2015.12.001 ↗
8. Amorphous Zr-Al-TM (TM=Co, Ni, Cu) Alloys with Significant Supercooled Liquid Region of Over 100 K10.2320/matertrans1989.32.1005 ↗
9. Designing metallic glass matrix composites with high toughness and tensile ductility10.1038/nature06598 ↗
10. Mechanical properties of bulk metallic glasses and composites10.1557/jmr.2007.0050 ↗
11. Microstructural heterogeneities governing the deformation of Cu47.5Zr47.5Al5 bulk metallic glass composites10.1016/j.actamat.2009.07.042 ↗
13. Bulk glass-forming metallic alloys: science and technology10.1557/S0883769400053252 ↗
14. Metallic glasses…on the threshold10.1016/S1369-7021(09)70037-9 ↗
15. Metallic glass matrix composites10.1016/j.mser.2015.12.001 ↗
16. Ductile quasicrystalline alloys10.1063/1.125907 ↗
17. Formation and investigation of the structure and mechanical properties of bulk metallic glassy composite (Ti-Zr)-(Cu-Ni-Co) alloys with the addition of Boron10.1016/j.msea.2012.08.030 ↗
18. High-strength Cu-based crystal-glassy composite with enhanced ductility10.1063/1.1647278 ↗
19. Effect of copper addition on the superelastic behavior of Ni-Ti shape memory alloys for orthodontic applications10.1002/(SICI)1097-4636(1999)48:5<682::AID-JBM12>3.0.CO;2-M ↗
20. Physical metallurgy of Ti–Ni-based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
21. Influence of the electronic structure on the ductile behavior of B2 CsCl-type AB intermetallics10.1016/j.actamat.2009.08.012 ↗
22. Deformation induced martensite and superelasticity in a β-metastable titanium alloy10.1016/S0921-5093(00)00921-7 ↗
23. Structure and mechanical properties of Ni–Cu–Ti–Zr composite materials with amorphous phase
24. Martensitic transformation path of NiTi10.1103/PhysRevB.79.020202 ↗
25. Thermal conductivity of metallic glassy alloys and its relationship to the glass forming ability and the observed cooling rates10.1557/JMR.2008.0286 ↗
26. High-strength and ductile (Ti-Ni)-(Cu-Zr) crystalline/amorphous composite materials with superelasticity and TRIP effect10.1016/j.jallcom.2015.10.175 ↗
27. High-strength and ductile glassy-crystal Ni–Cu–Zr–Ti composite exhibiting stress-induced martensitic transformation10.1080/14786430903128577 ↗
28. Internal friction in a Ni–Ti-based glassy-crystal alloy10.1016/j.jallcom.2013.07.102 ↗
29. Thermal conductivity of metallic glassy alloys and its relationship to the glass forming ability and the observed cooling rates10.1557/JMR.2008.0286 ↗
30. Martensite nucleation on dislocations in Cu-Al-Ni shape memory alloys10.1063/1.2710076 ↗
31. Deformation-induced martensitic transformation in Cu-Zr-(Al,Ti) bulk metallic glass composites10.1016/j.scriptamat.2008.11.015 ↗
32. High-strength and ductile glassy-crystal Ni-Cu-Zr-Ti composite exhibiting stress-induced martensitic transformation10.1080/14786430903128577 ↗
33. Triple yielding and deformation mechanisms in metastable Cu47.5Zr47.5Al5 composites10.1016/j.actamat.2012.07.015 ↗
34. Energetics of twinning in martensitic NiTi10.1016/j.actamat.2011.05.063 ↗
35. The influence of aging on critical transformation stress levels and martensite start temperatures in NiTi: Part 2-discussion of experimental results10.1115/1.2815995 ↗
36. Otsuka · 1998