Development of ultrahigh strength cast-grade microalloyed steel by simple innovative heat treatment techniques for industrial applications
Source abstract
Abstract
Abstract Aim of the present study is to devise simple and economical heat treatment methods to develop ultrahigh strength cast-grade microalloyed steel for industrial applications. Typical heat treatment cycles were designed on the basis of critical temperatures, Ac 3 & Ac 1 (obtained through Thermo-Calc software) and TTT/CCT curves (constructed using JMatPro software). In this work, homogenized annealed samples have been subjected to typical heat treatment cycles that consisted of repeated short-duration holding at different critical temperatures followed by forced air cooling/ice-brine quenching. The two cycles heat treatment (i.e., holding for 6 min at Ac 3 + 50 °C followed by forced air cooling + holding at intercritical zone for 20 min followed by ice-brine quenching) has resulted a significant increase in the strength with a significant amount of ductility (UTS = 1545 MPa, hardness = 446 HV, 9% elongation). This could be attributed to the development of a typical complex microstructure consisted of degenerate pearlite, fragmented cementite and finely dispersed NbC/VC in the matrix of spider network like martensite. Development of such typical microstructure has been enlightened through the analysis of divorced eutectoid transformation and diffusion controlled mechanisms. Therefore, these heat treatments techniques could be extremely useful to develop ultrahigh strength cast grade steels economically for structural/industrial applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Effects of vanadium and titanium on mechanical properties of low carbon as cast microalloyed steels10.1179/136404606X163505 ↗
2. As-cast mechanical properties of vanadium/niobium microalloyed steels10.1016/j.msea.2007.08.057 ↗
3. Gladman · 1997 · 280
4. Development of the microalloyed constructional steels
5. Advances in high strength steel technology for naval hull construction10.4028/www.scientific.net/KEM.84-85.491 ↗
6. Knowlton · 1929 · 195
7. Enhancing mechanical properties of a low-carbon microalloyed cast steel by controlled heat treatment10.1016/j.msea.2012.08.122 ↗
8. The effect of intercritical heat treatment on the mechanical properties of AISI 3115 steel10.1016/j.jmatprotec.2004.04.391 ↗
9. A review on importance of microalloying in steel
10. Mechanical properties of V, Nb, and Ti-bearing As-cast microalloyed steels
11. Raghavan · 2006 · 197
12. Thermomechanical processing of low carbon Nb–Ti stabilized microalloyed steel: microstructure and mechanical properties10.1016/j.msea.2015.08.072 ↗
13. Siwecki · 1997 · 757
14. An analysis of combined cyclic heat treatment performance10.1016/j.jmatprotec.2004.04.121 ↗
15. Effect of cylic heat treatment on microstructure and mechanical properties of 0.6 wt% carbon steel10.1016/j.msea.2010.03.003 ↗
16. Microstructural modifications and changes in mechanical properties during cyclic heat treatment of 0.16% carbon steel10.1016/j.msea.2011.11.095 ↗
17. Thermal cycling treatments and microstructures for improved properties of Fe-0.12% C- 0.5% Mn steels10.1016/0025-5416(76)90112-9 ↗
18. Grain refinement of steel cyclic rapid heating10.1016/0026-0800(73)90058-X ↗
19. Using JMatPro to model materials properties and behavior10.1007/s11837-003-0013-2 ↗
20. Mechanisms of pearlite spheroidization10.1007/BF02646654 ↗
21. Continuous short-cycle anneal for spheroidization of cartridge-case steel
22. Accelerated bainitic transformation during cyclic austempering10.1007/s10853-007-2065-0 ↗
23. Accelerated grain growth behaviour during cyclic annealing10.1016/S1359-6454(02)00398-1 ↗
24. Grain refinement of high strength maraging steel through cyclic heat treatment10.1016/0025-5416(78)90152-0 ↗
25. Austempering of bearing steel for improved mechanical properties10.1016/j.scriptamat.2008.03.023 ↗
26. Structure–property relationship in a 960 MPa grade ultrahigh strength low carbon niobium–vanadium microalloyed steel: the significance of high frequency induction tempering10.1016/j.msea.2014.08.072 ↗
27. Study of cast microalloyed steel10.1179/026708303225008644 ↗
28. Enhancing mechanical properties of a low-carbon microalloyed cast steel by controlled heat treatment10.1016/j.msea.2012.08.122 ↗