Effect of heat treatment on dynamic recrystallization behaviors and mechanical properties of Mg–2.7Nd–0.5Zn–0.8Zr alloy
Source abstract
Abstract
Abstract The fine-grained structure development and the resultant mechanical properties during/after hot deformation were investigated in a Mg–2.7Nd–0.5Zn–0.8Zr alloy pretreated in solution and subsequently full aging. The true stress-true strain flow curves show a two-step work hardening during hot compression due to the interactions between dislocations and Mg–Nd precipitates as well as Zn–Zr intermetallics. In as-aging (AA) sample containing statically precipitated particles (SPPs), deformation bands (DBs) are easily developed at low strains and then ultrafine grains (UFGs) are evolved at along the boundaries of DBs and original grains at medium strains and rapidly approaches to a full development of final stable UFGs as the strain goes higher. In as-solution (AS) sample, by contrast, equiaxial UFGs are partially developed even in high strain and the grain sizes are smaller attributed to dynamic precipitated particles (DPPs). Tensile tests were carried out at ambient temperature for both types of sample, the results show that the tensile elongation to fracture of the hot deformed AA sample is higher than that of the AS one, because the former has a higher volume fraction and a weaker texture of UFGs developed. Besides, the AA sample contains a higher 5% proof strength compared with the AS one at low deformation temperature, however, such trend is reversed at high temperature, which may be resulted from the effect of SPPs and DPPs, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Particle evolution in Mg–Zn–Zr alloy processed by integrated extrusion and equal channel angular pressing: evaluation by electron microscopy and synchrotron small-angle X-ray scattering10.1016/j.actamat.2014.03.027 ↗
2. Comprehensive study of phase transformation in age-hardening of Mg–3Nd–0.2Zn by means of scanning transmission electron microscopy10.1016/j.actamat.2015.05.001 ↗
3. Effect of composition on the texture and deformation behaviour of wrought Mg alloys10.1016/j.scriptamat.2007.09.054 ↗
4. Effect of initial orientation on the microstructure and mechanical properties of textured AZ31 Mg alloy during torsion and annealing10.1016/j.matdes.2015.07.113 ↗
5. Microstructures and Mechanical properties of Friction Stir processed Mg–2.0Nd–0.3Zn–1.0Zr Magnesium Alloy10.1016/j.jma.2013.06.001 ↗
6. Metallography of Dilute MG–Nd–Zn Alloys10.1016/0026-0800(80)90019-1 ↗
7. Microstructure and mechanical properties in cast magnesium–neodymium binary alloys10.1016/j.msea.2007.05.058 ↗
8. Comparison of the corrosion behaviour in 5% NaCl solution of Mg alloys NZ30K and AZ91D10.1007/s10800-007-9426-x ↗
9. Effects of heat treatments on the microstructures and mechanical properties of Mg–3Nd–0.2Zn–0.4Zr (wt%) alloy10.1016/j.msea.2007.08.064 ↗
10. Mechanical properties of fine-grained magnesium alloys processed by severe plastic forging
11. Mechanical properties and grain growth kinetics in magnesium alloy after accumulative compression bonding10.1016/j.matdes.2012.12.039 ↗
12. Microstructure development and tensile mechanical properties of Mg–Zn–Re–Zr magnesium alloy10.1016/j.matdes.2012.03.059 ↗
13. Microstructure and mechanical properties of high performance Mg–Gd based alloys10.1016/j.matdes.2008.04.069 ↗
14. Particle effects on recrystallization in magnesium–manganese alloys: particle-stimulated nucleation10.1016/j.actamat.2009.02.032 ↗
15. Effect of Mg17Al12 precipitates on the microstructural changes and mechanical properties of hot compressed AZ91 magnesium alloy10.1016/j.msea.2009.05.032 ↗
16. Dynamic recrystallization behaviors and the resultant mechanical properties of a Mg–Y–Nd–Zr alloy during hot compression after aging10.1016/j.msea.2015.05.076 ↗
17. Microstructure and mechanical behaviour of an elevated temperature Mg-rare earth based alloy10.1016/j.msea.2008.11.004 ↗
18. Microstructure and mechanical properties in cast magnesium–neodymium binary alloys10.1016/j.msea.2007.05.058 ↗
19. Effect of Nd and Y addition on microstructure and mechanical properties of as-cast Mg–Zn–Zr alloy10.1016/j.jallcom.2006.02.054 ↗
20. Investigation on the microstructure and mechanical properties of a cast Mg–6Zn–5Al–4RE alloy10.1016/j.jallcom.2007.03.118 ↗
21. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
22. Dynamic evolution of new grains in magnesium alloy AZ31 during hot deformation10.2320/matertrans.44.197 ↗
23. Microstructural development under interrupted hot deformation and the mechanical properties of a cast Mg–Gd–Y–Zr alloy10.1016/j.msea.2015.11.034 ↗
24. Structural development at severely high strain in AZ31 magnesium alloy processed by cold forging and subsequent annealing10.1016/j.matdes.2012.08.025 ↗
25. Dynamic recrystallization: mechanical and microstructural considerations10.1016/0001-6160(84)90049-X ↗
26. The texture and anisotropy of magnesium-zinc-rare earth alloy sheets10.1016/j.actamat.2006.11.013 ↗
27. Microstructure and mechanical properties of Mg–Al–Zn alloy sheets severely deformed by asymmetrical rolling10.1016/j.scriptamat.2006.09.034 ↗