Effect of weld metal toughness on fracture behavior under ultra-low cycle fatigue loading (earthquake)
Source abstract
Abstract
Abstract Results from 12 ultra-low cycle fatigue tests performed on the weld metals of both toughness and non-toughness rated grades are presented. Fracture resistance under these loadings seemed to be dependent on materials' toughness, displacement amplitude, and stress state triaxiality, while the toughness effect was more highlighted at high stress levels and concentrations. To study the effect of microstructures on these failures, supporting ancillary tests including all-weld tension coupons, Charpy V-notched impact tests, and optical and scanning electron microscope analyses were performed. The favored microstructures appeared to be those which absorbed energy by plastic deformation and, hence, hindered void formation and/or could avoid crack propagation by deflection. Considering the response of the tested materials to cyclic loadings and the requirements of the materials specified in AISC341 Provisions could question the adequacy of these requirements for weld metals. However, the role of microstructural features like inclusions would be the same in both the Charpy impact tests and ultra-low cycle loadings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High-Velocity Impact and Material Behavior · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Development of improved welded moment connections for earthquake-resistant Design10.1016/S0143-974X(01)00095-5 ↗
2. Welding consumables developments in the aftermath of the northridge earthquake10.1007/BF03266464 ↗
3. A.C. Bannister, Y. Tkach, P.L. Harrison, C. Lequesne, A.M. Habraken, A. Plumie,r W. Hoelbling, H. Saol, M. Gomes, Validation and enhancement of risk assessment procedure for seismic connections, Europe direct, final report 2008, EUR 22993 EN.
4. Kaufmann · 1997
5. Seismic Provisions for structural Steel Building. American Institute of Steel Construction, INC 2005.
6. Behavior of welded connections of moment resisting frames beam-to-column joints10.1016/S0141-0296(02)00091-3 ↗
7. Strength and ductility of fillet weld with transverse root notch10.1016/j.jcsr.2008.05.001 ↗
8. Effect of weld details on the ductility of steel column baseplate connections10.1016/j.jcsr.2008.08.004 ↗
9. M. Fahmy, B. Stojadinovic, S.C. Goel, Analytical and experimental studies on the seismic design of steel column bases, in: Proceeding of the 8th Canadian Conference on Earthquake Engineering, 1999.
10. Cyclic testing of steel moment connections rehabilitated with RBS or welded haunch10.1061/(ASCE)0733-9445(2000)126:1(57) ↗
11. H. Kuwamura, Fracture of steel welded joints under severe earthquake motion, in: Proceedings of the 11th World Conference on Earthquake Engineering, 11WCEE, 1996.
12. Ductile crack as trigger of brittle fracture in steel10.1061/(ASCE)0733-9445(1997)123:6(729) ↗
13. Finite element simulation of ultra-low cycle fatigue cracking in steel structures10.1016/j.jcsr.2013.07.007 ↗
14. Failure analysis based on microvoid growth for sheet metal during uniaxial and biaxial tensile tests10.1016/j.matdes.2013.02.020 ↗
15. A strain-dependent ductile damage model and its application in the derivation of fracture toughness by micro-indentation10.1016/j.matdes.2014.11.010 ↗
16. ANSI/AWS A5.1-91 E6013 rutile electrodes: the effect of calcite
17. Effect of different coating composition's rutile-type welding electrodes on undercut defect in manual electric arc welding
18. A.T. Myers, G.G. Deirlein, A. Kanvinde, Testing and Probabilistic Simulation of Ductile Fracture Initiation in Structural Steel Components and Weldments, The John A. Blume Earthquake Engineering Center, Report no. 170, 2009.
19. Microstructures controlling the ductile crack growth resistance of low carbon steels10.1007/s11661-998-0179-x ↗
20. Correlation of microstructure and fracture toughness in two 4340 steels10.1007/BF02663019 ↗
21. Microstructure and impact toughness of C-Mn weld metals
22. Impermeable low hydrogen covered electrodes: weld metal, slag, and fumes evaluation10.1016/S2238-7854(12)70012-1 ↗
23. Sharma · 2009
24. Blodgett · 1999
25. R. Fox The impact of impact toughness, Practical welding today, 2013.
26. Influence of Mn and Ni on the microstructure and toughness of C-Mn-Ni weld metals
27. Effect of Ni on microstructure and mechanical properties of underwater wet welding joint10.1016/j.matdes.2015.04.007 ↗
28. The contribution of intragranular acicular ferrite microstructural constituent on impact toughness and impeding crack initiation and propagation in the heat-affected zone (HAZ) of low-carbon steels10.1016/j.msea.2015.03.090 ↗
29. Contribution of acicular ferrite to the increased hydrogen resistance of low alloy steel
30. The effect of austenitizing temperature on the fracture initiation toughness of as-quenched HP9-4-20 steel10.1007/BF02647726 ↗
31. Effect of volume fraction and shape of sulfide inclusions on through-thickness ductility and impact energy of high-strength 4340 plate steels10.1007/BF02648395 ↗
32. Relationships between J-integral and the strain energy evaluated in a finite volume surrounding the tip of sharp and blunt V-notches10.1016/j.ijsolstr.2006.11.041 ↗
33. Averaged strain energy density and J-integral for U-and blunt V-shaped notches under torsion10.1007/s10704-014-9953-5 ↗
34. Prediction of fracture behavior of beam-to-column welded joints using micromechanical damage model10.1016/j.jcsr.2013.02.014 ↗