journal article·2016-04

The influence of selected ECAP-processing routes on the material properties of Magnesium Elektron 675

M. Bleckmann, M. Eichhorst, M. Schuch, W. Kreuzer, V.H. Hammond, C. Spiller, L.W. Meyer, N. Herzig

Publisher page

Abstract

Abstract Due to the continued interest in reducing weight in both automobile and aerospace structures, interest has grown in magnesium based alloys as a possible materials solution. Despite this interest, these alloys have not been widely utilized due to their relatively poor mechanical properties in comparison to other material systems. However, recent research has clearly indicated that improved mechanical properties can be achieved in these alloys through the use of severe plastic deformation processing methods. In this report, we examine the influence of equal channel angular pressing on the mechanical response of Elektron 675, a Mg–Gd–Y alloy. Results indicate that an appreciable increase in total elongation and absorbed energy can be obtained depending on the selected processing route. However, these improvements in elongation are somewhat offset by a slight reduction in tensile strength. The observed mechanical response is explained through microstructural analysis as well as texture measurements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Deformation mechanisms in magnesium single crystals compressed in direction parallel to hexagonal axis10.2320/matertrans1960.4.1 ↗
2. Excellent room-temperature ductility and formability of Mg‒Gd‒Zn alloy sheets10.1016/j.jallcom.2010.11.141 ↗
3. Effects of heat treatments on microstructure and mechanical properties of Mg-15Gd-5Y-0.5Zr alloy10.1016/S1002-0721(08)60084-8 ↗
4. Microstructure and strengthening mechanisms of a cast Mg–1.48Gd–1.13Y–0.16Zr (at%) alloy10.1007/s10853-009-3672-8 ↗
5. “Mg–Gd–Y system phase diagram calculation and experimental clarification10.1016/j.jallcom.2006.10.125 ↗
6. Structural aspects of High performance Mg alloys design10.1016/S0921-5093(01)01291-6 ↗
7. Fracture behavior of High strength Mg‒Gd‒Y‒Zr magnesium alloy10.1016/S1003-6326(09)60281-8 ↗
8. On the role of non-basal deformation mechanisms for the ductility of Mg and Mg–Y alloys10.1016/j.actamat.2010.08.031 ↗
9. Elektron 675 Preliminary Data, Magnesium Elektron UK, 2010.
10. On the shock response of the magnesium alloy Elektron 67510.1063/1.3686442 ↗
11. Jones · 2011
12. Mechanical properties and microstructure of an AZ61 Mg alloy produced by equal channel angular pressing10.1016/S1359-6462(02)00094-5 ↗
13. Microstructure, crystallographic texture and mechanical properties of the magnesium alloy AZ31B after different routes of thermo-mechanical processing10.1016/j.ijplas.2012.03.007 ↗
14. A.M. Twier, J.D. Robson, G.W. Lorimer, P. Rogers, Texture development in the extruded magnesium-yttrium-gadolinium alloy Elektron 675, in: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, WILEY-VCH Verlag GmbH, Germany, 2009.
15. A.M. Twier, J.D. Robson, G.W. Lorimer, P. Rogers, A study of microstructure of cast and extruded Elektron 675, in: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, WILEY-VCH Verlag GmbH, Germany, 2009.
16. Microstructure and mechanical properties of Mg–Gd–Y–Zr alloy processed by equal channel angular pressing10.1016/S1003-6326(11)60986-2 ↗
17. M. Eichhorst, L.W. Meyer, and N. Herzig, Nordmetall GmbH, unpublished research, 2014.
18. Improvement of strength of magnesium alloy processed by equal channel angular extrusion10.1016/j.scriptamat.2008.07.007 ↗
19. Microstructure, crystallographic texture, and plastic anisotropy evolution in an Mg alloy during equal channel angular extrusion processing10.1016/j.msea.2011.06.043 ↗
20. Grain refinement vs. crystallographic texture: mechanical anisotropy in a magnesium alloy10.1016/j.scriptamat.2010.09.042 ↗
21. Effect of grain size on prismatic slip in Mg–3Al–1Zn alloy10.1016/j.scriptamat.2012.05.017 ↗
22. Structural characterizations of ZK60 subjected to ECAP Process–Route A
23. Microstructure and mechanical properties of ZK60 alloy processed by two-step equal channel angular pressing10.1016/j.jallcom.2009.11.192 ↗
24. ZK60 alloy processed by ECAP: microstructural, physical, and mechanical characterization10.1016/j.msea.2013.11.050 ↗
25. Enhanced ductility in strongly textured magnesium produced by equal channel angular pressing10.1016/j.scriptamat.2003.10.006 ↗
26. The role of microstructure and texture in controlling mechanical properties of AZ31B magnesium alloy processed by I-ECAP10.1016/j.msea.2015.04.055 ↗
27. Mechanical anisotropy of extruded Mg–6% Al–1% Zn alloy10.1016/j.msea.2004.02.020 ↗
28. Enhanced strength and ductility of MgGd–Y–Zr alloys by secondary extrusion10.1016/j.jma.2013.02.006 ↗
29. The role of back-pressure in equal channel angular extrusion10.1007/s10853-005-6088-0 ↗
30. Experimental study of a structural magnesium alloy with high absorption energy under dynamic loading10.1016/S1359-6462(98)00296-6 ↗
31. Dynamic behavior of a rare-earth-containing Mg alloy, WE43B-T5, plate with comparison to conventional alloy, AM30-F10.1007/s11837-013-0830-x ↗
32. Mechanical behavior and microstructural evolution of a Mg AZ31 sheet at dynamic strain rates10.1016/j.actamat.2010.01.029 ↗
33. A Taylor model based description of the proof stress of magnesium AZ31 during hot working10.1007/s11661-003-0146-5 ↗
34. The microstructure features and the deformation mechanism of a fine grained magnesium alloy under dynamic loading
35. Meyers · 1994
36. The high strain rate deformation behavior of high purity magnesium and AZ31B magnesium alloy
37. High strain rate deformation: mechanical behavior and deformation substructures induced10.1146/annurev-matsci-070511-155034 ↗