Multi-scale pore morphology in directed vapor deposited yttria-stabilized zirconia coatings
Source abstract
Abstract
Abstract A high pressure, electron-beam directed-vapor deposition process has been used to deposit partially stabilized zirconia containing 7% mass yttria at deposition pressures of 7.5–23 Pa. Anisotropic, ultra-small-angle X-ray scattering (USAXS) was then used to determine the surface area, shape and orientation of pores within the coatings. The total surface area of the ellipsoidal shaped pores was found to increase with deposition pressure. However, the through-thickness thermal conductivity measurements reveal the existence of a minimum thermal conductivity in coatings deposited at an intermediate pressure. Observations of the anisotropic X-ray scattering intensity at this intermediate pressure indicated greater proportions of both feather-like (oblate) pores with their major dimension at about 60° to the plane of the coating and fine columnar (prolate) pores oriented perpendicular to the coating plane. Since these oblate pore orientations are most efficient at impeding conductive thermal transport through the coating, it is believed that the change in preferred pore orientations with pressure is responsible for the higher thermal resistance of coatings grown in the intermediate pressure regime.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · nanoparticles nucleation surface interactions · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Fairbanks · Mater. Sci. Eng. · 1987 · 88 · 32110.1016/0025-5416(87)90101-7 ↗
2. NRC, Coatings for High-Temperature Structural Materials: Trends and Opportunities. Washington, DC, National Academy of Sciences (1996). ISBN 0-309-05381-1.
3. Thermal barrier coatings
4. Padture · Science · 2002 · 296 · 28010.1126/science.1068609 ↗
5. Clarke · Ann. Rev. Mater. Res. · 2003 · 33 · 38310.1146/annurev.matsci.33.011403.113718 ↗
6. Clarke · Mater. Today · 2005 · 2210.1016/S1369-7021(05)70934-2 ↗
7. Clarke · Surf. Coat. Technol. · 2003 · 163–164 · 6710.1016/S0257-8972(02)00593-5 ↗
8. Levi · Curr. Opin. Solid Mater. Sci. · 2004 · 8 · 7710.1016/j.cossms.2004.03.009 ↗
9. Nichols · Surf. Coat. Technol. · 2002 · 151–152 · 38310.1016/S0257-8972(01)01651-6 ↗
10. Yang · Acta Mater. · 2002 · 50 · 230910.1016/S1359-6454(02)00057-5 ↗
11. Klemens · High Temp. High Press. · 1985 · 17 · 41
12. Gu · Acta mater. · 2001 · 49 · 253910.1016/S1359-6454(01)00141-0 ↗
13. Lu · J. Am. Ceram. Soc. · 2001 · 84 · 293710.1111/j.1151-2916.2001.tb01118.x ↗
14. J.T. Demasi, M. Ortiz, K.D. Sheffler, NASA CR 182230 (1989).
15. R.A. Miller, G.W. Leissler J.M. Jobe, NASA TP 3285 (1993).
16. Kyoungjun · J. Am. Ceram. Soc. · 1999 · 82 · 299
17. Meier · Trans. ASME · 1994 · 116 · 25010.1115/1.2910869 ↗
18. Zhou · Acta Mater. · 1997 · 45 · 444110.1016/S1359-6454(97)00156-0 ↗
19. Müller · Surf. Sci. · 1987 · 184 · L37510.1016/S0039-6028(87)80265-0 ↗
20. Rossnagel · J. Vac. Sci. Technol. B · 1996 · 14 · 181910.1116/1.588562 ↗
21. van de Waterbeemd · Phillips Res. Reps. · 1967 · 22 · 375
22. Thornton · J. Vac. Sci. Technol. · 1975 · 12 · 83010.1116/1.568682 ↗
23. Kennedy · 1968
24. Müller · J. Appl. Phys. · 1985 · 58 · 257310.1063/1.335885 ↗
25. Cuomo · J. Vac. Sci. Technol. · 1982 · 20 · 34910.1116/1.571462 ↗
26. Huang · J. Vac. Sci. Technol. A · 1985 · 3 · 216110.1116/1.573271 ↗
27. Movchan · Phys. Met. Metallogr. · 1969 · 28 · 83
28. D.V. Rigney, R. Viguie, D.J. Wortman, D.W. Skelly, Thermal Barrier Coating Workshop 1995, NASA Conference Publication 3312 (1995) 135.
29. Robbie · J. Vac. Sci. Technol. A · 1995 · 13 · 103210.1116/1.579579 ↗
30. Yang · Acta Mater. · 1997 · 45 · 145510.1016/S1359-6454(96)00256-X ↗
31. Zhao · Acta Mater. · 2006 · 54 · 519510.1016/j.actamat.2006.06.028 ↗
32. Hass · J. Vac. Sci. Technol. A · 2009 · 27 · 40410.1116/1.3085725 ↗
33. Bird · 1994
34. Hass · J. Porous Mater · 2010 · 17 · 2710.1007/s10934-008-9261-4 ↗
35. Kulkarni · Mater. Sci. Eng. A · 2006 · 426 · 4310.1016/j.msea.2006.03.070 ↗
36. Groves · Surf. Engin. · 2000 · 16 · 461
37. J.F. Groves, Y. Marciano, D.D. Hass, G. Mattausch, H. Morgner, H.N.G. Wadley, Proceedings of the Society of Vacuum Coaters 44th Annual Technical Conference (2001) 99.
38. Ilavsky · Rev. Sci. Instrum. · 2002 · 73 · 166010.1063/1.1425387 ↗
39. Ilavsky · J. Appl. Cryst. · 2009 · 42 · 46910.1107/S0021889809008802 ↗
40. Bonse · Appl. Phys. Lett. · 1965 · 7 · 23810.1063/1.1754396 ↗
41. Ilavsky · J. Appl. Cryst. · 2009 · 42 · 34710.1107/S0021889809002222 ↗
42. Ilavsky · Mater. Sci. Eng. A · 1999 · 272 · 21510.1016/S0921-5093(99)00450-5 ↗
43. Parker · J. Appl. Phys. · 1961 · 32 · 167910.1063/1.1728417 ↗
44. Cowan · J. Appl. Phys. · 1962 · 34 · 92610.1063/1.1729564 ↗
45. Cahill · Rev. Sci. Instrum. · 1990 · 61 · 80210.1063/1.1141498 ↗
46. ASTM Standard Test Method E 1225-87, Annual Book of ASTM Standards, ASTM, Philadelphia 14.02 (1994), p. 712.
47. ASTM Standard Test Method C 177-85, Annual Book of ASTM Standards, ASTM, Philadelphia 4.06 (1992), p. 17.
48. A.J. Slifka, B. J. Filla J. M. Phelps, in Proceedings of the 1997 TBC Workshop, Cininnati, OH (1997), p. 33.
49. Hass · Acta mater. · 2001 · 49 · 97310.1016/S1359-6454(00)00403-1 ↗
50. Flores Renteria · Surf. Coat. Technol. · 2007 · 201 · 478110.1016/j.surfcoat.2006.10.020 ↗
51. Potton · J. Appl. Cryst. · 1988 · 21 · 66310.1107/S0021889888004819 ↗