journal article·2013-10

Compression behavior of Al2O3k/Al composite materials fabricated by counter-gravity infiltration casting

H. Wang, X.Y. Zhou, B. Long, H.Z. Liu

Publisher page

Abstract

Abstract Al 2 O 3 k/Al composite materials were produced using alumina hollow particles as pore-forming materials through the counter-gravity infiltration casting system. Mechanical properties of Al 2 O 3 k/Al composite materials under quasi-static compressive load were studied. The experimental results show that the quasi-static compressive stress–strain curves of Al 2 O 3 k/Al composite materials include three distinct regions: the linear elastic region, the yield platform region and the densification region. Compared with aluminum foam, the yield stress and plateau stress of Al 2 O 3 k/Al composite material are much greater, and the densification strain is reduced relatively. This may be due to the fact that Al 2 O 3 k/Al composite materials have the characteristics of both plastic material and brittle material. The alumina hollow particle size and the void content are the key influencing factors for the compression performance such that with the decrease of the particle size and the void content, the yield stress and plateau stress increase gradually.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · High-Velocity Impact and Material Behavior · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Dorian · Mater. Sci. Eng. A · 2005 · 391 · 40810.1016/j.msea.2004.09.012 ↗
2. Periasamy · Mater. Sci. Eng. A · 2010 · 527 · 284510.1016/j.msea.2010.01.066 ↗
3. Markaki · Scr. Mater. · 2001 · 49 · 1677
4. Cao · Trans. Nonferrous Met. Soc. China · 2006 · 16 · 35110.1016/S1003-6326(06)60060-5 ↗
5. Banhart · Prog. Mater. Sci. · 2001 · 46 · 55910.1016/S0079-6425(00)00002-5 ↗
6. Daoud · J. Alloys Compd. · 2009 · 487 · 61810.1016/j.jallcom.2009.08.026 ↗
7. Rohatgi · Composites Pt A · 2006 · 37 · 43010.1016/j.compositesa.2005.05.047 ↗
8. Parkash · Mater. Sci. Eng. A · 1995 · 199 · 19510.1016/0921-5093(94)09708-9 ↗
9. Wu · Scr. Mater. · 2007 · 56 · 22110.1016/j.scriptamat.2006.10.008 ↗
10. Jiang · Mater. Sci. Eng. A · 2005 · 392 · 36610.1016/j.msea.2004.09.048 ↗
11. Andrews · Mater. Sci. Eng. A · 1999 · 270 · 11310.1016/S0921-5093(99)00170-7 ↗
12. Banhart · Adv. Eng. Mater. · 2006 · 8 · 78110.1002/adem.200600071 ↗
13. Kanahashi · Mater. Sci. Eng. A · 2000 · 280 · 34910.1016/S0921-5093(99)00704-2 ↗
14. Mondal · Mater. Sci. Eng. A · 2009 · 507 · 10210.1016/j.msea.2009.01.019 ↗
15. Dorian · Acta Mater. · 2006 · 54 · 150110.1016/j.actamat.2005.11.017 ↗
16. Clyne · 1993
17. Guo · Mater. Sci. Eng. A · 1998 · 241 · 18410.1016/S0921-5093(97)00493-0 ↗
18. Mondal · Mater. Des. · 2009 · 30 · 126810.1016/j.matdes.2008.06.059 ↗
19. Binner · J. Eur. Ceram. Soc. · 2009 · 29 · 83710.1016/j.jeurceramsoc.2008.07.034 ↗
20. Zhang · Mater. Lett. · 2003 · 57 · 145310.1016/S0167-577X(02)01006-6 ↗
21. X.Y. Zhou, J. Li, H.Z. Liu, F.Q. Ding, S.P. Zhong, B.W. Shang, A Device for Preparation of Foam Metal by Infiltration Casting, vol. 2, 2007, Application no. CN 200710034420.1.
22. Huo · Trans. Nonferrous Met. Soc. China · 2012 · 22 · 8510.1016/S1003-6326(11)61144-8 ↗
23. Cree · J. Mater. Process. Technol. · 2010 · 210 · 190510.1016/j.jmatprotec.2010.07.002 ↗
24. Warren · J. Appl. Mech. · 1988 · 55 · 34110.1115/1.3173680 ↗
25. Gibson · 1997