Microstructure and property evolution during the sintering of stainless steel alloy with Si3N4
Source abstract
Abstract
Abstract This paper describes the sintering of a martensitic stainless steel alloy with addition of Si 3 N 4 . Sintering behavior was studied at different sintering temperatures ranging from 1250 to 1400 °C with different holding times (20–80 min) and with varying Si 3 N 4 . Results showed that the samples were densified rapidly via liquid phase sintering mechanism. Nearly full density was obtained at 1300 °C after 60 min of holding time with 5 wt% Si 3 N 4 . Temperature above 1350 °C and Si 3 N 4 content 10 wt% caused slumping of the samples. Two weight percent Si 3 N 4 was found chemically stable in steel alloy. Above 2 wt% Si 3 N 4 dissolved in the steel matrix. The distribution of dissolved Si and N was characterized by XMAP. When N content reached much above its solubility limit in steel alloy it diffused out leaving pores in steel alloy with considerable decrease in the sintered density. The mechanical properties of the sintered product with varying Si 3 N 4 were measured. A maximum ultimate tensile strength of 1011 MPa was achieved with 2 wt% Si 3 N 4 sintered at 1300 °C after 60 min of holding time. Fracture morphologies of tensile samples are also reported.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Powder Metallurgy Techniques and Materials · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Sercombe · Mater. Sci. Eng. · 2003 · A363 · 24210.1016/S0921-5093(03)00645-2 ↗
2. Sercombe · Mater. Sci. Eng. · 2003 · A344 · 31210.1016/S0921-5093(02)00447-1 ↗
3. Ozkan Gulsoy · Scripta Mater. · 2005 · 52 · 18710.1016/j.scriptamat.2004.09.032 ↗
4. Akhtar · Powder Metall. · 2006 · 49 · 2810.1179/174329006X89344 ↗
5. Thorpe · Powder Metall. · 2005 · 48 · 4710.1179/003258905X37666 ↗
6. Jain · Mater. Lett. · 2004 · 58 · 203710.1016/j.matlet.2003.12.022 ↗
7. Patankar · Powder Metall. · 2000 · 43 · 35010.1179/003258900666078 ↗
8. Mukherjee · Mater. Sci. Eng. · 1985 · 75 · 6710.1016/0025-5416(85)90178-8 ↗
9. J.W. Martin, T. Kosa, B.A. Dulmaine, US Patent 5,681,528 (1997).
10. Tandon · Int. J. Powder Metall. · 1998 · 34 · 40
11. Ozkan Gulsoy · J. Mater. Sci. · 2005 · 40 · 341510.1007/s10853-005-0432-2 ↗
12. Liu · Mater. Lett. · 2000 · 45 · 3210.1016/S0167-577X(00)00070-7 ↗
13. Silvia · Acta Mater. · 1998 · 46 · 250110.1016/S1359-6454(98)80034-7 ↗
14. Silvia · Wear · 1991 · 148 · 6910.1016/0043-1648(91)90207-B ↗
15. Liu · Met. Mater. Trans. A · 2004 · 35A · 172510.1007/s11661-004-0081-0 ↗
16. Song · Scripta Mater. · 2005 · 52 · 107510.1016/j.scriptamat.2005.02.016 ↗