Evaluation of toughness characteristics of a die-cast Mg–Al–Mn alloy Am60B under different microstructural conditions
Source abstract
Abstract
Abstract The fracture toughness characteristics of AM60B die-casting Mg–Al–Mn high purity alloy are reported. The material, combining rather good ductility, casting properties, and corrosion resistance, is used for manufacturing large thin-section components for the automotive industry. Center-cracked tension specimens of a thickness of 2.2–3.1 mm were machined directly from components produced on large scale and were tested both in as-die-cast and in aged (heat treated for 18 h at 175 °C) conditions, monitoring stable crack propagation under increasing applied load. Crack growth resistance curves ( R -curves) were obtained, and the stress intensity factor leading to unstable crack propagation was found to be about 20 MPa m 1/2 for the as-die-cast material and about 19 MPa m 1/2 for the aged alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Mordike · Mater. Sci. Eng · 2001 · A302 · 3710.1016/S0921-5093(00)01351-4 ↗
2. O. Holta, H. Westengen, D. Albright, SAE Technical Paper 940413, SAE, Detroit, MI, USA, 1994.10.4271/940413 ↗
3. Aghion · J. Mater. Proc. Technol · 2001 · 117 · 38110.1016/S0924-0136(01)00779-8 ↗
4. S. Schumann, F. Friedrich, in: B.L. Mordike, F. Hehmann (Eds.), Magnesium Alloys and their Applications, DGM Informationsgesellschaft, Oberursel, Germany, 1992, pp. 3–13.
5. T.K. Aune, H. Westengen, SAE Technical Paper 950424, SAE, Detroit, MI, USA, 1995.10.4271/950424 ↗
6. S.K. Iskander, R.K. Namstad, S. Viswanathan, R.L. Swain, in: H.I. Kaplan, J. Hryn, B. Clow (Eds.), Magnesium Technology 2000: The Minerals, Metals and Materials Society, USA, 2000, pp. 325–329.
7. Vedani · Mater. Sci. Technol · 2001 · 17 · 93810.1179/026708301101510979 ↗
8. H. Westengen, L.T. Wei, T. Ae, D. Albrigth, in: B.L. Mordike, K.U. Kainer (Eds.), Magnesium alloys and their applications, Werkstoffinformationsgesellchaft, Frankfurt, Germany, 1998, pp. 209–214.
9. C. Suman, SAE Technical Paper 890207, SAE, Detroit, MI, USA, 1989.10.4271/890207 ↗
10. ASTM E 399-9, Test Method for Plane-Strain Fracture Toughness of Metallic Materials.
11. ASTM E1820-99a, Standard Test Method for Measurement of Fracture Toughness.
12. ASTM B 646-97, Standard Practice for Fracture Toughness Testing of Aluminium Alloys.
13. ASTM E 561-98, Standard Practice for R-Curve Determination.
14. Johnson · Mater. Res. Stand · 1965 · 5 · 442
15. Kleiner · J. Light Metals · 2002 · 2 · 27710.1016/S1471-5317(03)00012-9 ↗
16. Heyer · Eng. Fract. Mech · 1972 · 4 · 41310.1016/0013-7944(72)90054-9 ↗