Fatigue strength of the Cu/Si interface in nano-components
Source abstract
Abstract
Abstract The fracture behavior of the Cu/Si interface in a nano-cantilever specimen with a 200 nm-thick Cu film (Specimen-200), which possesses a nanometer-scale strain-concentrated region, is examined under a cyclic bending load. The fatigue strength is around GPa level owing to the high yield stress of the Cu nano-film and the deformation constraint associated with the neighboring hard materials. The S – N curve shows clear dependence of fatigue life on the applied stress in the high-stress range, Δ σ . Specimens with a 20 nm-thick Cu film (Specimen-20) are also investigated for comparison. The stress range in the fatigue fracture of Specimen-20 is higher than that of Specimen-200 for the same fatigue life. However, there is good coincidence in the Δ σ / σ s ( σ s : strength in monotonic load) vs. N f (number of cycles to fracture) at high Δ σ . The S – N curves suggest the existence of a fatigue threshold (Δ σ w ) at low Δ σ . The ratio of fatigue limit to the fracture stress in a monotonic loading, Δ σ w / σ s , is large compared with the magnitude of bulk metal, which suggests the brittle behavior of the interface. Moreover, the fatigue limits have good coincidence with their yield stresses.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Vinci · Thin Solid Films · 1995 · 262 · 14210.1016/0040-6090(95)05834-6 ↗
2. Gertsman · Acta Metall. Mater. · 1994 · 42 · 353910.1016/0956-7151(94)90486-3 ↗
3. Cao · J. Phys. D: Appl. Phys. · 2009 · 42 · 06540510.1088/0022-3727/42/6/065405 ↗
4. Xiang · Acta Mater. · 2006 · 54 · 544910.1016/j.actamat.2006.06.059 ↗
5. Xiang · J. Mater. Res. · 2006 · 21 · 160710.1557/jmr.2006.0195 ↗
6. Sanders · Acta Mater. · 1997 · 45 · 401910.1016/S1359-6454(97)00092-X ↗
7. Suryanarayanan · Mater. Sci. Eng. A · 1999 · 264 · 21010.1016/S0921-5093(98)01027-2 ↗
8. Mughrabi · Mater. Sci. Eng. · 1978 · 33 · 20710.1016/0025-5416(78)90174-X ↗
9. Essmann · Philos. Mag. A · 1981 · 44 · 40510.1080/01418618108239541 ↗
10. Laird · Mater. Sci. Eng. · 1986 · 81 · 43310.1016/0025-5416(86)90281-8 ↗
11. Finney · Philos. Mag. · 1975 · 31 · 33910.1080/14786437508228937 ↗
12. Winter · Philos. Mag. · 1974 · 30 · 71910.1080/14786437408207230 ↗
13. Kuhlmannwilsdorf · Mater. Sci. Eng. · 1977 · 27 · 13710.1016/0025-5416(77)90166-5 ↗
14. Kuhlmannwilsdorf · Mater. Sci. Eng. · 1980 · 46 · 20910.1016/0025-5416(80)90176-7 ↗
15. Chuang · J. Micromech. Microeng. · 2007 · 17 · 93810.1088/0960-1317/17/5/013 ↗
16. Gao · Phys. Status Solidi · 2009 · 3 · 26010.1002/pssr.200903235 ↗
17. Sumigawa · Mater. Sci. Eng. A · 2010 · 527 · 651810.1016/j.msea.2010.07.002 ↗
18. Sumigawa · Mater. Sci. Eng. A · 2010 · 527 · 479610.1016/j.msea.2010.04.002 ↗
19. Takahashi · Thin Solid Films · 2008 · 516 · 192510.1016/j.tsf.2007.08.062 ↗
20. Sumigawa · Thin Solid Films · 2010 · 518 · 604010.1016/j.tsf.2010.06.039 ↗
21. Thompson · Acta Metall. · 1971 · 19 · 59710.1016/0001-6160(71)90012-5 ↗
22. Suresh · 1991
23. Shiozawa · Fatigue Fract. Eng. Mater. Struct. · 1997 · 20 · 23710.1111/j.1460-2695.1997.tb00281.x ↗
24. Sihn · Composites: Part A · 2005 · 36 · 138110.1016/j.compositesa.2004.11.016 ↗
25. Gilbert · Appl. Phys. Lett. · 1997 · 71 · 47610.1063/1.119610 ↗
26. Ritchie · Int. J Fract. · 1999 · 100 · 5510.1023/A:1018655917051 ↗
27. Hirakata · Acta Mater. · 2006 · 5489
28. Han · J. Alloys Compd. · 2007 · 434–435 · 30410.1016/j.jallcom.2006.08.179 ↗