Contribution to the influence of chemical composition and cooling conditions on the eutectic solidification range of Fe–C–X-melts
Source abstract
Abstract
Abstract The eutectic solidification range (ESR) is the difference between the eutectic temperature of the stable Fe–C-system (iron–carbon, iron–graphite) and the eutectic temperature of the metastable Fe–Fe3C-system (iron–ironcarbide, iron–cementite). This range is a key to graphitization. The size and the location of the range are important to determine the solidification system: grey or mottled or white. Quantitative investigations by thermal analysis (TA) with croning-sand and steel crucibles at the Technical University Clausthal in Germany gave the following results: Si and Al expand the range, the stable system is promoted. Cu and Ni have no significant influence. P, Mn, Cr, Mo and S contract the range, the metastable system is promoted. Increasing cooling rate normally decreases the transformation temperatures. Concerning these results a combination of thermal analysis and the spectrometric analysis could be very useful. Variations in chemical composition can be taken into account to evaluate temperature–time curves and graphitization tendency more accurately.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Neumann · Giesserei, techn.-wiss Beih. · 1959 · 11 · 1217
2. Neumann · Giesserei · 1959 · 46 · 120
3. Neumann · Giessereiforschung · 2004 · 56 · 115
4. J.F. Janovak, R.B. Gundlach, Giesserei-Praxis 1983, 15–16, pp. 223–242.10.5833/jjgs.16.223 ↗
5. Doepp · Giesserei · 1989 · 79 · 47
6. A. Kagawa, T. Okamoto, in: Foundry Processes. Their Chemistry and Physics, Warren, MI, USA, 1986, oral 4.
7. Magnin · Z. Metallkd. · 1988 · 79 · 282
8. Menk · Giessereiforschung · 1992 · 44 · 66
9. Menk · Giesserei · 1992 · 79 · 548
10. W. Bauer, Giesserei-Praxis 1995, 5–6, pp. 82–90.
11. Roesch · Giesserei, techn.-wiss Beih. · 1963 · 15 · 118
12. Roesch · Giesserei · 1963 · 50 · 670
13. Menk · Giessereiforschung · 1992 · 44 · 95
14. Menk · Giesserei · 1992 · 79 · 791
15. Guhl · Giessereiforschung · 1994 · 46 · 62
16. Guhl · Giesserei · 1994 · 81 · 745
17. Morinaka · 2000
18. K.J. Reifferscheid, Beiträge zur Metallurgie von Gusseisen mit Kugelgraphit. Dr.-Ing.-Dissertation TU Clausthal 1991.
19. Schuermann · Giessereiforschung · 1977 · 29 · 153
20. Schuermann · Giesserei · 1977 · 64 · 706
21. Schuermann · Giessereiforschung · 1980 · 32 · 1
22. Schuermann · Giesserei · 1980 · 67 · 392
23. Schwenkel · Giessereiforschung · 2004 · 56 · 110
24. Schwenkel · Giesserei · 2004 · 91 · 68, 69, 81
25. S. Schwenkel, Dr.-Ing.-Dissertation TU Clausthal 2002, Shaker Verlag, ISBN: 3-8322-2140-9.
26. R. Doepp, S. Schwenkel, Final report for Project DO 565 Deutsche Forschungsgemeinschaft (DFG), Bonn, from Institute for Metallurgy, Technical University Clausthal, 2004.
27. G. Nandori, J. Dul, L. Varga, Giesserei-Praxis 2005, 4, pp. 142–146.