journal article·2011-03Open access

Forming limit and fracture mechanism of ferritic stainless steel sheets

Le Xu, Frédéric Barlat, Deok Chan Ahn, José Divo Bressan

Materials Science and Engineering: A· Volume 528· Issue 7-8

Abstract

Abstract In this work, the forming limit curves (FLCs) of two ferritic stainless steel sheets, AISI409L and AISI430, were predicted with the Marciniak–Kuczynski (MK) and Bressan–William–Hill (BWH) models, combined with the Yld2000-2d yield function and the Swift hardening law. Uniaxial tension, disk compression and hydraulic bulge tests were performed to determine the yield loci and hardening curves of both materials. Meanwhile, the strain rate sensitivity (SRS) coefficient was measured through uniaxial tension tests carried out at different strain rates. Out-of-plane stretching tests were conducted in sheet specimens to obtain the surface limit strains under different linear strain paths. Micrographs of the specimens fractured in different stress states were obtained by optical and scanning electron microscopy. The overall results show that the BWH model can predict the FLC better than the MK model, and that the SRS does not have much effect on the limit strains for both materials. The predicted FLCs and micrograph analysis both indicate that failure occurs by surface localized necking in uniaxial and plane strain tension states, whereas it occurs by localized shearing in the through thickness direction in balanced biaxial tension state.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Goodwin · Metall. Ital. · 1968 · 60 · 767
2. Keeler · Sheet Met. Ind. · 1965 · 42 · 683
3. Hill · J. Mech. Phys. Solids · 1952 · 1 · 1910.1016/0022-5096(52)90003-3 ↗
4. Hutchinson · 1978
5. Marciniak · Int. J. Mech. Sci. · 1967 · 9 · 60910.1016/0020-7403(67)90066-5 ↗
6. Swift · J. Mech. Phys. Solids · 1952 · 1 · 110.1016/0022-5096(52)90002-1 ↗
7. Paraianu · 2007 · 151
8. Signorelli · Int. J. Plast. · 2009 · 25 · 110.1016/j.ijplas.2008.01.005 ↗
9. Butuc · J. Mater. Process. Technol. · 2003 · 142 · 71410.1016/S0924-0136(03)00813-6 ↗
10. Yao · Int. J. Plast. · 2002 · 18 · 101310.1016/S0749-6419(01)00022-5 ↗
11. Korhonen · Acta Polytech. Scand. Chem. · 1980 · 144 · 33
12. Marciniak · 1992
13. Chung · Int. J. Plast. · 2010
14. Bressan · Int. J. Mech. Sci. · 1983 · 25 · 15510.1016/0020-7403(83)90089-9 ↗
15. Korhonen · Mater. Sci. Eng. A · 2008 · 488 · 15710.1016/j.msea.2007.11.006 ↗
16. Tasan · Mech. Mater. · 2009 · 41 · 126410.1016/j.mechmat.2009.08.003 ↗
17. Ductile damage evolution and strain path dependency
18. A shear fracture criterion to predict limit strains in sheet metal forming
19. Alsos · Int. J. Solids Struct. · 2008 · 45 · 204210.1016/j.ijsolstr.2007.11.015 ↗
20. Barlat · Int. J. Plast. · 2003 · 19 · 129710.1016/S0749-6419(02)00019-0 ↗
21. On yield loci of anisotropic cubic metals
22. Bishop · Philos. Mag. · 1951 · 7 · 41410.1080/14786445108561065 ↗
23. Young · J. Appl. Metal Work. · 1981 · 2 · 1110.1007/BF02833994 ↗
24. Disk compression testing and constitutive modeling of TWIP sheet sample
25. Xu · Int. J. Mater. Form. · 2009 · 3 · 13510.1007/s12289-009-0666-7 ↗