Correlation between yield stress and hardness of nickel–silicon–boron-based alloys by nanoindentation
Source abstract
Abstract
Abstract Based on the relation proposed by Tabor in 1951, which connects the ultimate tensile strength and the yield stress of classical materials to the Brinell or Vickers hardness numbers by a simple factor of proportionality, we propose an extended analytical model for the determination of the yield stress of brittle materials using nanoindentation data. This model considers the nanoindentation hardness calculated from the projected actual contact area between the indenter and the material which is representative of the real mean pressure exerted by the indenter compared to classical hardness numbers. A coefficient is introduced in the model to integrate the extent of the elastic recovery of the indented material occurring after the withdrawal of the indenter. This is possible by using the criterion defined by the residual to maximum indenter displacements ratio, this criterion being already related to the deformation mode under indentation. Indeed, this criterion allows identifying the piling-up deformation observed for complete or fully plastic deformation materials or the sinking-in deformation for purely elastic materials. The proposed model thus allows a good estimation of the yield stress of brittle materials for which classical tensile tests are not applicable. The model is validated on a variety of amorphous nickel–silicon-based alloy ribbons, i.e., Ni 89 Si 9 B 2 , Ni 78 Si 9 B 13 and Ni 68 Fe 3 Cr 7 Si 8 B 14 on which both nanoindentation tests and tensile experiments have been performed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Tabor · J. Inst. Met. · 1951 · 79 · 1
2. Moteff · Metall. Trans. A · 1975 · 6 · 110110.1007/BF02661365 ↗
3. Cahoon · Metall. Trans. · 1971 · 2 · 197910.1007/BF02913433 ↗
4. Cahoon · Metall. Trans. · 1971 · 3 · 304010.1007/BF02652880 ↗
5. Swab · Int. J. Appl. Ceram. Technol. · 2012 · 9 · 65010.1111/j.1744-7402.2011.02686.x ↗
6. Oliver · J. Mater. Res. · 1992 · 7 · 156410.1557/JMR.1992.1564 ↗
7. Johnson · J. Mech. Phys. Solids · 1971 · 18 · 11510.1016/0022-5096(70)90029-3 ↗
8. Francis · Trans. ASME J. Eng. Mater. Technol. · 1976 · 98 · 27210.1115/1.3443378 ↗
9. Au · 1980 · 579
10. Field · J. Mater. Res. · 1995 · 10 · 10110.1557/JMR.1995.0101 ↗
11. Haggag · ASMT Sel. Tech. Pap. · 1990 · 1092 · 188
12. Haggag · ASTM Sel. Tech. Pap. · 1997 · 1318 · 85
13. Mathews · Acta Metall. · 1980 · 28 · 31110.1016/0001-6160(80)90166-2 ↗
14. Tirupataiah · Metall. Trans. A · 1991 · 22A · 237510.1007/BF02665003 ↗
15. Taljat · Int. J. Solids Struct. · 1998 · 33–35 · 441110.1016/S0020-7683(97)00249-7 ↗
16. Yetna N׳Jock · Int. J. Mech. Sci. · 2013 · 75 · 25710.1016/j.ijmecsci.2013.07.008 ↗
17. Norbury · J. Iron Steel Inst. · 1928 · 117 · 673
18. Hill · Proc. R. Soc. Lond. A · 1989 · 423 · 30110.1098/rspa.1989.0056 ↗
19. Marshall · J. Am. Ceram. Soc. · 1980 · 65 · C17510.1111/j.1151-2916.1982.tb10357.x ↗
20. Chicot · Surf. Coat. Technol. · 1996 · 81 · 26910.1016/0257-8972(95)02474-3 ↗
21. Marx · Acta Mater. · 1997 · 45 · 379110.1016/S1359-6454(97)00031-1 ↗
22. Cheng · Philos. Mag. Lett. · 1998 · 78 · 11510.1080/095008398178093 ↗
23. Xu · Philos. Mag. A · 2002 · 82 · 189310.1080/01418610208235701 ↗
24. Saha · Acta Mater. · 2002 · 50 · 2310.1016/S1359-6454(01)00328-7 ↗
25. Giannakopoulos · Scr. Mater. · 1999 · 40 · 119110.1016/S1359-6462(99)00011-1 ↗
26. Chicot · Mater. Sci. Eng. A · 2011 · 528 · 704110.1016/j.msea.2011.06.003 ↗
27. Mosallaee · Metall. Mater. Trans. A · 2008 · 39A · 238910.1007/s11661-008-9588-0 ↗
28. Diabb · Wear · 2009 · 267 · 55010.1016/j.wear.2008.12.046 ↗