Simulation of spheroidisation of elongated Si-particle in Al–Si alloys by the phase-field model
Source abstract
Abstract
Abstract The application of the phase-field model for spheroidisation of undissolvable particles during high-temperature treatment of alloys is pointed out. Modelling of the spheroidisation of elongated Si-particles during annealing of Al–Si alloy is elaborated in this paper. The driving force for spheroidisation is the minimization of the total free-energy of the system or the minimization of the ratio between the interface areas and the particle volumes. The spheroidisation kinetics of elongated Si-particle for binary Al–Si system during homogenisation of aluminium alloys simulated by the phase-field model is demonstrated. The influences of the interface energy and the homogenisation temperature on the spheroidisation kinetics is presented. The lack of knowledge of the interface energy anisotropy between Si-particle and the aluminium phase is the only reason for using isotropic interface energy in simulations. The thermodynamic driving force for the phase transformation of the silicon into the aluminium phase is computed from the data obtained from the JMatPro software for aluminium alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Cáreras · Mater. Sci. Eng. A · 1995 · 197 · 17110.1016/0921-5093(94)09775-5 ↗
2. Dons · Mater Sci. Eng. A · 2005 · 413–414 · 56110.1016/j.msea.2005.09.053 ↗
3. University of Cambridge Micrograph Library, http://www.doitpoms.ac.uk/miclib/index.php, 2007.
4. Mondolfo · 1976
5. E. Ogris, Development of Al–Si–Mg alloys for semi-solid processing and silicon spheroidisation treatment (SST) for Al–Si cast alloys, PhD Thesis, Swiss Federal Institute of Technology Zurich, Zurich, Switzerland (2002).10.4028/www.scientific.net/MSF.396-402.149 ↗
6. Glicksman · 2000
7. Boettinger · Annu. Rev. Mater. Res. · 2002 · 32 · 16310.1146/annurev.matsci.32.101901.155803 ↗
8. Hillert · 1998
9. Modelling of phase transformations in heat treatment processes
10. I. Kovačević, Modelling of solid-solid phase transformations in aluminium alloys, PhD Thesis, Graduate School, University of Nova Gorica, Nova Gorica, Slovenia (2008).
11. Kim · Phys. Rev. E · 1999 · 60 · 718610.1103/PhysRevE.60.7186 ↗
12. Tiaden · Pysica D · 1998 · 115 · 7310.1016/S0167-2789(97)00226-1 ↗
13. Hechta · Mater. Sci. Eng. · 2004 · R46 · 110.1016/j.mser.2004.07.002 ↗
14. Simmons · Mater. Sci. Eng. · 2004 · A365 · 13610.1016/j.msea.2003.09.019 ↗
15. Porter · 1990
16. Howe · 1997
17. I. Loginova, Phase-field modeling of diffusion controlled phase transformations, PhD Thesis, Department of Mechanics, Royal Institute of Technology, Stockholm, Sweden (2003).
18. S. Hu, Phase-field models of microstructure evolution in a system with elastic inhomogenity and defects, PhD Thesis, Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA USA (2004).