Local residual stress measurements on nitride layers
Source abstract
Abstract
In this work, local stresses in different nitrided maraging steel samples of high practical interest for industrial applications were studied through the so-called micro-slit milling method using a focused ion beam. The nitrogen concentration profiles were acquired by glow discharge optical emission spectroscopy. The residual stress state was measured on the surface and also in cross-section, i.e. examining effects of the nitrogen concentration gradient. It is shown that an enhanced lateral resolution can be achieved when a novel multiple fitting approach is employed. The results presented show an overall agreement with stress profiles obtained by X-ray diffraction. Finite Element Modeling is used to explain the apparent discrepancies. A clear correlation between the residual stress and nitriding profiles has been found and the applicability of this method is shown in particular when stress gradients are present. (C) 2015 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Welding Techniques and Residual Stresses · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Withers · Mater. Sci. Technol. · 2001 · 17 · 35510.1179/026708301101509980 ↗
2. Totten · 2002
3. Prummer · Adv. X-Ray Anal. · 1983 · 26 · 225
4. Chen · Acta Mater. · 2013 · 61 · 184310.1016/j.actamat.2012.11.054 ↗
5. Schajer · 2013
6. DeWald · J. Strain Anal. Eng. Des. · 2003 · 38 · 6510.1243/030932403762671908 ↗
7. Prime · Appl. Mech. Rev. · 1999 · 52 · 7510.1115/1.3098926 ↗
8. Cheng · 2007
9. McCarthy · Thin Solid Films · 2000 · 358 · 14610.1016/S0040-6090(99)00680-X ↗
10. Sabaté · Microelectron. Eng. · 2007 · 84 · 178310.1016/j.mee.2007.01.272 ↗
11. Korsunsky · Mater. Lett. · 2009 · 63 · 196110.1016/j.matlet.2009.06.020 ↗
12. Kang · Thin Solid Films · 2003 · 443 · 7110.1016/S0040-6090(03)00946-5 ↗
13. Kahn-Jetter · Exp. Mech. · 1990 · 30 · 1010.1007/BF02322695 ↗
14. Sutton · 2009
15. Tada · 2000
16. Winiarski · Metall. Mater. Trans. A · 2010 · 41 · 174310.1007/s11661-009-0127-4 ↗
17. Sabaté · Nanotechnology · 2006 · 17 · 526410.1088/0957-4484/17/20/037 ↗
18. C. Mansilla, V. Ocelík, J.T. De Hosson, Statistical analysis of SEM image noise, in: Proceedings of the 11th International Conference on Surface Effects and Contact Mechanics: Computational Methods and Experiments, WIT Press, Siena, Italy, 2013, pp. 13–24.10.2495/SECM130021 ↗
19. Mansilla · Microsc. Microanal. · 2014 · 20 · 162510.1017/S1431927614013282 ↗
20. ASM Handbook · 1991
21. Mansilla · J. Mater. Sci. · 2015 · 50 · 364610.1007/s10853-015-8927-y ↗
22. Struers GmbH Nederland, Metalog Guide. 〈http://www.struers.com/default.asp?top_id=5&main_id=19&sub_id=25&doc_id=125〉.
23. Moore · SAE Trans. · 1958 · 66 · 340
24. Blair · J. Phys. Conf. Ser. · 2009 · 181 · 01207810.1088/1742-6596/181/1/012078 ↗
25. Sebastiani · Mater. Sci. Eng. A · 2011 · 528 · 790110.1016/j.msea.2011.07.001 ↗
26. Aramis (2004) GOM mbH (2004), Aramis v 5.3.0 User Manual.
27. Winiarski · Exp. Mech. · 2012 · 52 · 79310.1007/s11340-011-9568-y ↗