journal article·2013-02

Microstructure and mechanical properties of TiAl alloys produced by rapid heating and open die forging of blended elemental powder compacts

Yongjun Su, Deliang Zhang, Fantao Kong, Yuyong Chen

Publisher page

Abstract

Abstract Ti–43Al–5V–4Nb (at%) intermetallic compounds were fabricated by a rapid heating and open die forging method using blended elemental powders. The process route consisted of powder blending, compacting, rapid heating, open die forging and heat treatment. During heating there is porosity in the blended and warm compacted powder billets which still persists after the first forging. In order to remove this difficulty a two stage forging process was used. A fully lamellar structure was seen in the TiAl alloy after heat treatment. Overall, the TiAl alloy showed moderately good mechanical properties at room temperature and good mechanical properties, with reasonable strength and good ductility at high temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Lasalmonie · Intermetallics · 2006 · 14 · 112310.1016/j.intermet.2006.01.064 ↗
2. Yamaguchi · Acta Mater. · 2000 · 48 · 30710.1016/S1359-6454(99)00301-8 ↗
3. Wu · Intermetallics · 2006 · 14 · 111410.1016/j.intermet.2005.10.019 ↗
4. Kim · Mater. Sci. Forum · 2007 · 539–543 · 153110.4028/www.scientific.net/MSF.539-543.1531 ↗
5. Tetsui · Mater. Sci. Eng. A · 2002 · 329–331 · 58210.1016/S0921-5093(01)01584-2 ↗
6. Appel · Adv. Eng. Mater. · 2006 · 8 · 37110.1002/adem.200600013 ↗
7. Clemens · Intermetallics · 2008 · 16 · 82710.1016/j.intermet.2008.03.008 ↗
8. Sautho · Intermetallics · 2008 · 8 · 110110.1016/S0966-9795(00)00045-5 ↗
9. Tetsui · Intermetallics · 2003 · 11 · 29910.1016/S0966-9795(02)00245-5 ↗
10. Tetsui · Intermetallics · 2005 · 13 · 97110.1016/j.intermet.2004.12.012 ↗
11. Wu · Metall. Mater. Trans. A · 2003 · 34 · 207710.1007/s11661-003-0272-0 ↗
12. Wang · J. Alloys Compd. · 2008 · 461 · 36710.1016/j.jallcom.2007.06.107 ↗
13. Bingchu · Mater. Chem. Phys. · 2002 · 75 · 29110.1016/S0254-0584(02)00078-0 ↗
14. Chen · Mater. Sci. Eng. A · 2009 · 525 · 16610.1016/j.msea.2009.06.056 ↗
15. Yu · J. Alloys Compd. · 2009 · 474 · 10510.1016/j.jallcom.2008.06.069 ↗
16. Lee · Mater. Sci. Eng. A · 1997 · 239–240 · 54010.1016/S0921-5093(97)00628-X ↗
17. Pyo · Mater. Sci. Eng. A · 2004 · 374 · 16010.1016/j.msea.2004.01.053 ↗
18. Bðhm · Adv. Power Metal. Part. Mater. · 1996 · 10 · 51
19. Zhang · Mater. Lett. · 2001 · 50 · 14910.1016/S0167-577X(00)00433-X ↗
20. Jiang · Mater. Res. Bull. · 2005 · 40 · 52110.1016/j.materresbull.2004.11.002 ↗
21. Nieh · Intermetallics · 1999 · 7 · 16310.1016/S0966-9795(98)00017-X ↗
22. Chen · J. Alloys Compd. · 2010 · 498 · 9510.1016/j.jallcom.2010.03.118 ↗
23. Schloffer · Intermetallics · 2012 · 22 · 23110.1016/j.intermet.2011.11.015 ↗
24. Morris · Mater. Sci. Eng. A · 1997 · 224 · 110.1016/S0921-5093(96)10532-3 ↗
25. Sawatzky · Mater. Sci. Forum · 2010 · 654–656 · 50010.4028/www.scientific.net/MSF.654-656.500 ↗