A densification model for powder materials under cold isostatic pressing—Effect of adhesion and friction of rubber molds
Source abstract
Abstract
The effect of adhesion and friction of a rubber mold on powder compacts was studied during unloading under cold isostatic pressing. The densification model by Lee and Kim was used for compaction of powder, based on the yield function of the Cap model and volumetric strain evolution. The bilinear cohesive model was used to study a detaching process and stress distributions at the interface between the mold and the compact. We also studied the failure of the powder compact during unloading under cold isostatic pressing due to friction at the interface, and compared experimental data with finite element results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Injection Molding Process and Properties · Rheology and Fluid Dynamics Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Kwon · J. Eng. Mat. Tech. · 1997 · 119 · 36610.1115/1.2812271 ↗
2. Michrafy · Powder Technol. · 2004 · 148 · 5310.1016/j.powtec.2004.09.021 ↗
3. Briscoe · Powder Technol. · 1998 · 99 · 22810.1016/S0032-5910(98)00113-2 ↗
4. Kim · Mater. Sci. Eng. · 2001 · 318 · 17410.1016/S0921-5093(01)01328-4 ↗
5. Yang · Powder Technol. · 2004 · 139 · 24010.1016/j.powtec.2003.01.001 ↗
6. Shima · Int. J. Mech. Sci. · 2002 · 44 · 160310.1016/S0020-7403(02)00064-4 ↗
7. Bhushan · 1999
8. McFarlane · Proc. R. Soc. Lond. A · 1950 · 202 · 22410.1098/rspa.1950.0096 ↗
9. Needleman · Ultramicroscopy · 1992 · 40 · 20310.1016/0304-3991(92)90117-3 ↗
10. Ghosh · Mech. Mater. · 2000 · 32 · 56110.1016/S0167-6636(00)00030-2 ↗
11. Swaminathan · J. Eng. Mat. Tech. · 2006 · 128 · 9610.1115/1.1925293 ↗
12. Camacho · Int. J. Solids Struct. · 1996 · 33 · 289910.1016/0020-7683(95)00255-3 ↗
13. Kumar · Int. J. Solids Struct. · 2000 · 37 · 728110.1016/S0020-7683(00)00199-2 ↗
14. Gu · J. Eur. Ceram. Soc. · 2007 · 26 · 226510.1016/j.jeurceramsoc.2005.03.256 ↗
15. Henderson · Proc. I Mech. Eng. Part. B · 2002 · 216 · 21510.1243/0954405021519861 ↗
16. Lee · Mater. Sci. Eng. A · 2007 · 445 · 16310.1016/j.msea.2006.09.013 ↗
17. R. Hibbitt, D. Karlsson, C. Sorensen, ABAQUS User’s I and II Manual, Hibbitt, Karlsson, and Sorensen, 2005.
18. Shima · Int. J. Mech. Sci. · 1976 · 18 · 28510.1016/0020-7403(76)90030-8 ↗
19. Xu · J. Mech. Phys. Solids · 1994 · 42 · 139710.1016/0022-5096(94)90003-5 ↗
20. Abdul-Baqi · Thin Solid Films · 2001 · 381 · 14310.1016/S0040-6090(00)01344-4 ↗
21. Abdul-Baqi · J. Mater. Res. · 2001 · 16 · 139610.1557/JMR.2001.0195 ↗
22. Gao · Model Simul. Mater. Sci. Eng. · 2004 · 12 · 45310.1088/0965-0393/12/3/007 ↗
23. Xia · Int. J. Solids Struct. · 2007 · 44 · 368510.1016/j.ijsolstr.2006.10.009 ↗
24. Wang · J. Mater. Sci. · 1984 · 19 · 80110.1007/BF00540451 ↗
25. P. Egleton, The post-aging mechanical behavior of some elastomers, PhD thesis, University of Aberdeen, 2000.
26. Yeoh · Rubber Chem. Technol. · 1993 · 66 · 75410.5254/1.3538343 ↗
27. Galen · Acta Material. · 2005 · 53 · 480110.1016/j.actamat.2005.06.023 ↗
28. Henderson · J. Eur. Ceram. Soc. · 2000 · 20 · 112110.1016/S0955-2219(99)00280-0 ↗