Grain boundary sliding and non-constancy strain during stress relaxation of pure Mg
Source abstract
Abstract
Stress relaxation during plastic deformation has been reported to improve ductility of metallic materials. In this study, the stress relaxation behaviour in pure magnesium is investigated during interrupted uniaxial tensile tests. During intermittent stopping of the machine for relaxation studies, the total strain is expected to remain constant. However, an anomalous non-constancy in total strain is observed in the present work. The total strain increases with relaxation time. Additional in-situ tensile tests indicate that the non-constant total strain is restricted only in the gauge area of the specimen, indicating a likely shear dominated deformation such as grain boundary sliding (GBS) responsible for the anomalous behaviour. The role of GBS during relaxation is studied using the deformation induced evolution of surface inhomogeneity. Determinations of surface profiling step heights at grain boundaries and inclination of grains were used to quantify the effect of GBS. The estimated activation volume of 4.35 b 3 further confirms the role of slip induced GBS on the deformation. A new stress relaxation model accommodating GBS is proposed and is found to fit the experimental data accurately.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. On the nonbasal slip in magnesium crystals10.2320/matertrans1960.5.14 ↗
2. Slip system in magnesium10.1016/0001-6160(73)90141-7 ↗
3. Creep and stress relaxation studies with polycrystalline magnesium10.1080/14786436608212610 ↗
4. The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys10.1016/S1359-6454(03)00005-3 ↗
5. Hauser · 1954
6. On the question of low-temperature sliding at grain boundaries
7. Grain-boundary sliding in AZ31 magnesium alloys at room temperature to 523 K10.2320/matertrans.44.445 ↗
8. Estimation of grain boundary sliding during ambient-temperature creep in hexagonal close-packed metals using atomic force microscope
9. Grain boundary sliding and strain compatibility
10. Internal microstructure observation of enhanced grain-boundary sliding at room temperature in AZ31 magnesium alloy10.1016/j.msea.2016.04.030 ↗
11. On the quantitative evaluation of superplastic flow mechanisms10.1016/0001-6160(83)90031-7 ↗
12. Stress relaxation and its effect on tensile deformation of steels10.1016/j.matdes.2013.05.088 ↗
13. Probing formability improvement of ultra-thin ferritic stainless steel bipolar plate of PEMFC in non-conventional forming process10.1007/s11661-016-3561-0 ↗
14. Time dependent ductility improvement of stainless steel SS 316 using stress relaxation10.1016/j.msea.2016.07.074 ↗
15. Advanced constitutive model for repeated stress relaxation accounting for transient mobile dislocation density and internal stress10.1016/j.mechmat.2019.03.009 ↗
16. Thermal effects on the enhanced ductility in non-monotonic uniaxial tension of DP780 steel sheet10.1007/s12540-016-6210-7 ↗
17. Investigations on ductility improvement and reloading yielding during stress relaxation of dual phase Ti–6Al–4V titanium alloy10.1016/j.jallcom.2020.154450 ↗
18. Technology to enhance deep-drawability by strain dispersion using stress relaxation phenomenon
19. Investigation of stress relaxation mechanisms for ductility improvement in SS316L10.1080/14786435.2017.1398422 ↗
20. Time dependent deformation of the magnesium alloys AS21 and AZ91 around 100 °C
21. Problems of plastic gliding10.1088/0959-5309/52/1/303 ↗
22. Stress relaxation in crystals10.1002/pssb.2220930102 ↗
23. Caillard · 2003
24. Stress relaxation in bending of type AISI 304 and A-286 steels at 773 K10.1007/BF00550255 ↗
25. Mobile dislocations during stress relaxation in an Fe-0.056 at. % Ti alloy10.1016/0001-6160(76)90029-8 ↗
26. A new method for activation volume measurements: application to Ni3(Al,Hf)10.1016/0921-5093(93)90339-G ↗
27. Comparative study of the stress relaxation in aged and un-aged high-purity aluminum polycrystals10.1023/A:1026752404893 ↗
28. Stress relaxation in KCI single crystals10.1007/BF01113606 ↗
29. Charged dislocations and plasto-electric effect in ionic crystals10.1016/S0921-5093(00)00784-X ↗
30. Stress relaxation and flow behavior of ultrafine grained AA 105010.1016/j.mechmat.2015.06.001 ↗
31. E8M-16a · 2016
32. Low temperature stress relaxation of nanocrystalline nickel10.1007/BF00349669 ↗
33. Stress relaxation and creep of some aluminium alloys10.1016/0025-5416(85)90182-X ↗
34. Stress-relaxation and creep behaviour of some rapidly solidified magnesium alloys10.1016/0921-5093(91)90954-L ↗
35. Quantitative evaluation of grain boundary sliding and its dependence on orientation and temperature in pure Zn10.1016/j.matlet.2019.03.025 ↗
36. A comparative study of indentation induced creep in pure magnesium and AZ61 alloy10.1016/j.msea.2015.01.075 ↗
37. Intragranular deformation mechanisms during ambient-temperature creep in hexagonal close-packed metals10.2320/matertrans.M2009224 ↗
38. Phenomenological and microstructural analysis of room temperature creep in titanium alloys10.1016/S1359-6454(99)00426-7 ↗
39. Strain-rate sensitivity enhanced by grain-boundary sliding in creep condition for AZ31 magnesium alloy at room temperature10.4028/www.scientific.net/MSF.838-839.106 ↗
40. Microstructural evolution and its influence on creep and stress relaxation in nanocrystalline Ni10.1016/j.actamat.2012.08.047 ↗
41. An investigation of grain-boundary sliding during creep10.1007/BF00572414 ↗
42. Stress relaxation test: issues in modelling and interpretation
43. Grain boundary sliding and deformation mechanism maps10.1016/0025-5416(79)90060-0 ↗