journal article·2021-06

Characterization of heterogeneous creep deformation in vanadium-modified 2.25Cr1Mo steel weldments by digital image correlation

Liang Chu, Xuedong Chen, Zhichao Fan, Yu Zhou, Zhenxing Wu, Qingfeng Cui

Publisher page

Abstract

Abstract Low alloy ferritic steels are widely used to manufacture critical components that operating at elevated temperatures in the process industry, but a better understanding of the creep responses of their weldments are still needed to provide guidance for the design of high-temperature welded structures. In the present paper, the heterogeneous creep behavior of vanadium-modified 2.25Cr1Mo ferritic steel weldments was investigated by using the digital image correlation (DIC) technique. Three-dimensional plot of creep strain across the weld joint was constructed to intuitively represent the spatio-temporal evolution of creep strain for the base metal (BM), weld metal (WM) and the heat affected zone (HAZ). Combining the analysis of strain contour evolution during creep with the microstructural examination, it is found that creep strain was primarily concentrated in the HAZ, resulting in the creep cavitation at grain boundaries of the coarse-grain bainitic HAZ. In addition, BM exhibited a faster deformation rate than WM during creep. In order to quantitatively describe the heterogeneous creep deformation, a sub-region extensometer method based on the construction of virtual extensometers was proposed to obtain the representative creep strain data of individual regions of weldments. Furthermore, a parameter identification procedure combining a global optimization method (i.e. genetic algorithm) with an initial value determination scheme, was developed to determine the model parameters of BM, WM and HAZ for the hyperbolic-sine creep constitutive model. The results show that the heterogenous creep behavior of the V-mod 2.25Cr1Mo steel weldment can be well characterized by combining the sub-region extensometer method, the hyperbolic-sine creep constitutive model and its genetic algorithm-based parameter identification method.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Creep constitutive equations for parent, Type IV, R-HAZ, CG-HAZ and weld material in the range 565–640 °C for Cr-Mo-V weldments10.1016/j.ijpvp.2004.07.014 ↗
2. Factors affecting Type IV creep damage in Grade 91 steel welds10.1016/j.msea.2013.04.045 ↗
3. Failure prediction for multi-material creep test specimens using a steady-state creep rupture stress10.1016/S0020-7403(99)00008-9 ↗
4. Lifetime predictions for high-temperature low-alloy ferritic steel weldments10.1243/030932405X30885 ↗
5. Creep constitutive equations for a 0.5Cr-0.5Mo-0.25V ferritic steel in the temperature range 600-675°C10.1243/03093247V314299 ↗
6. Constitutive description of primary and steady-state creep deformation behaviour of tempered martensitic 9Cr-1Mo steel10.1080/14786435.2016.1197435 ↗
7. A study of the creep behavior of modified 9Cr–1Mo steel using continuum-damage modeling10.1016/j.ijplas.2012.04.004 ↗
8. 2010
9. 2007
10. 2003
11. Heterogeneous creep behavior of a CrMoV multi-pass weld metal10.1016/j.msea.2017.02.084 ↗
12. On the evolution of local material properties and residual stress in a three-pass SA508 steel weld10.1016/j.actamat.2012.03.022 ↗
13. Effect of welding heat input on microstructures and toughness in simulated CGHAZ of V-N high strength steel10.1016/j.msea.2013.04.044 ↗
14. Creep life assessment of 2.25Cr-1Mo piping steel and of its simulated HAZ material10.2472/jsms.46.12Appendix_237 ↗
15. Impression creep technique-an overview10.1016/j.msea.2005.05.110 ↗
16. Residual stress determination using hole drilling and 3D image correlation10.1007/s11340-006-5859-0 ↗
17. Experimental evaluation of localized creep deformation in grade 91 steel weldments10.1016/j.msea.2020.140356 ↗
18. Application of three-dimensional digital image correlation to the core-drilling method10.1007/BF02428166 ↗
19. Measurement of creep deformation across welds in 316H stainless steel using digital image correlation10.1007/s11340-016-0245-z ↗
20. Heterogeneous creep deformation in dissimilar metal welds (DMWs)10.1016/j.msea.2019.01.075 ↗
21. 2019
22. Creep behaviour of post-weld heat-treated 2.25Cr-1Mo ferritic steel base, weld metal and weldments10.1016/0921-5093(90)90265-5 ↗
23. A review of creep analysis and design under multi-axial stress states10.1016/j.nucengdes.2007.02.003 ↗
24. Mechanisms-based creep constitutive equations for an aluminium alloy10.1243/03093247V294309 ↗
25. Zhou · 2015
26. Creep constitutive equations for a 0.5 Cr 0.5 Mo 0.25 V ferritic steel in the temperature range 565°C-675°C10.1016/j.ijpvp.2004.11.002 ↗