journal article·2021-05

On the fatigue life enhancement due to periodic healing of a NiTi shape memory alloy

V.V. Shastry, Gaurav Singh, U. Ramamurty

Publisher page

Abstract

Abstract Fatigue failure in NiTi based shape memory alloys (SMAs) that are in the austenitic state is accelerated by the progressive accumulation of stress-induced martensite (SIM) under cyclic loading, even when the maximum stress of the fatigue cycle is well below that required for stress-induced martensitic transformation. Wagner et al. (2008) [1] have shown that periodic annealing of the fatigued specimens at temperatures well above the austenitic finish temperature, which they termed as ‘healing’, can enhance the fatigue life of the SMAs that are cyclically loaded in the austenitic state. In this paper, the optimum interval at which healing must be performed is investigated. Experimental results show that considerable improvement in the total life of the SMA component can be realized if the fatigued specimens are healed periodically right after 20% of their service life has lapsed. Healing later (at 40% and 60% of the fatigue life) does not lead to any significant improvement, indicating that irreversible damage has already set in. Real-time infrared thermography technique was used to study the thermal signatures during tensile and fatigue testing. Results show that it is possible to monitor the formation of SIM during cyclic loading using thermography.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Healing of fatigue damage in NiTi shape memory alloys10.1088/0022-3727/41/18/185408 ↗
2. Fatigue of Nitinol: the state-of-the-art and ongoing challenges10.1016/j.jmbbm.2015.06.010 ↗
3. Functional fatigue of shape memory wires under constant-stress and constant-strain loading conditions10.1016/j.proeng.2011.04.607 ↗
4. Mahtabi · 2015 · 155
5. Functional fatigue of shape memory polymers10.1002/adem.200800213 ↗
6. An origin of functional fatigue of shape memory alloys10.1016/j.actamat.2017.01.001 ↗
7. Fatigue life of Ti–50 at.% Ni and Ti–40Ni–10Cu (at.%) shape memory alloy wires10.1016/S0921-5093(99)00344-5 ↗
8. Structural and functional fatigue of NiTi shape memory alloys10.1016/j.msea.2003.10.327 ↗
9. Structural fatigue of pseudoelastic NiTi shape memory wires10.1016/j.msea.2003.11.058 ↗
10. Enhancement of fatigue life of Ni–Ti–Fe shape memory alloys by thermal cycling10.1016/j.msea.2010.09.006 ↗
11. The effects of pseudoelastic prestraining on the tensile behaviour and two-way shape memory effect in aged NiTi10.1016/0001-6160(89)90151-X ↗
12. Restoration by rapid overheating of thermally stabilised martensite of NiTi shape memory alloys10.1016/S0925-8388(99)00576-9 ↗
13. Stabilisation of martensite due to shear deformation via variant reorientation in polycrystalline NiTi10.1016/S1359-6454(00)00129-4 ↗
14. Infrared thermography for condition monitoring - a review10.1016/j.infrared.2013.03.006 ↗
15. Optimized deployment of heat-activated surgical staples using thermography10.1063/1.1601305 ↗
16. Local influence of material processing on phase transitions in NiTi shape memory alloys investigated by IR thermography10.1016/j.msea.2003.10.343 ↗
17. Homogeneous and heterogeneous deformation mechanisms in an austenitic polycrystalline Ti–50.8 at.% Ni thin tube under tension. Investigation via temperature and strain fields measurements10.1016/j.actamat.2007.05.027 ↗
18. Heat source estimations to study the localized behaviour of superelastic NiTi shape memory alloys
19. Heat estimation from infrared measurement compared to DSC for austenite to R phase transformation in a NiTi alloy10.1007/s11665-012-0466-y ↗
20. Direct physical evidence for the back-transformation of stress-induced martensite in the vicinity of cracks in pseudoelastic NiTi shape memory alloys10.1016/j.actamat.2009.08.015 ↗
21. Recent advances in spatiotemporal evolution of thermomechanical fields during the solid–solid phase transition
22. Unnotched fatigue behavior of an austenitic Ni-Ti shape memory alloy10.1016/j.msea.2008.07.025 ↗
23. Influence of Ni on martensitic phase transformations in NiTi shape memory alloys10.1016/j.actamat.2010.02.019 ↗
24. Orientation-dependent plastic deformation mechanisms and competition with stress-induced phase transformation in microscale NiTi10.1016/j.actamat.2021.116731 ↗
25. Phenomenological analysis of plateaus on stress-strain hysteresis in TiNi shape memory alloy wires10.1016/0167-6636(96)00030-0 ↗
26. Duerig · 2013
27. Dynamic recrystallization study of a Fe-Mn-Si based shape memory alloy in constant and variable thermomechanical conditions10.1016/j.matchar.2019.04.016 ↗
28. Donachie · 2002
29. Prasad · 2015
30. Temperature evolution in deformed shape memory alloy10.1016/S1350-4495(02)00134-2 ↗
31. Suresh · 1998
32. Development of a localized heat treatment system for shape memory alloy wires using an ytterbium fiber laser10.1016/j.jmatprotec.2007.07.050 ↗
33. Electromagnetic induction heating of an orthopaedic nickel–titanium shape memory device10.1002/jor.21171 ↗
34. Shape memory alloys for microsystems: a review from a material research perspective10.1016/j.msea.2007.02.166 ↗
35. Shape memory alloys for aerospace, recent developments, and new applications: a short review10.3390/ma13081856 ↗