Effects of solutes and temperature on high-temperature deformation and subsequent recovery in hot-rolled low alloy steels
Source abstract
Abstract
Abstract The high temperature deformation behavior, kinetics of recovery and onset of recrystallization in ternary Fe-0.1%C-X (X = Mn, Si or Al) alloys have been investigated. The alloys were hot-deformed to a strain of 0.25 at various temperatures from 850 °C to 1100 °C, at a strain rate of 1 s−1. The effect of solutes and temperature on the flow stress was examined. In addition, stress-relaxation experiments were performed to quantify the restoration behaviour. The stress relaxation curves can be divided into three regimes: recovery, recrystallization and grain growth. A widely used recovery model was adopted to capture recovery kinetics. Effects of dislocations, solutes and temperature were considered through an effective activation volume term. Dislocations and solutes tend to decrease the activation volume while temperature will have the opposite effect. The onset of recrystallization was delayed with increasing alloying solutes and lowering temperatures. It is concluded that the solutes effects on work-hardening decreased from Al, Si to Mn and high temperatures can facilitate dynamic recovery during deformation; the same effects of solutes and temperature were observed for subsequent recovery.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Modern HSLA steels and role of non-recrystallisation temperature10.1179/1743280411Y.0000000013 ↗
2. Effect of thermo-mechanical treatments on the microstructure of micro-alloyed low-carbon steels10.1007/s10853-008-3000-8 ↗
3. Recrystallization and grain coarsening control in processing high niobium microalloyed line pipe steels10.4028/www.scientific.net/MSF.753.391 ↗
4. Callister · 2014
5. Humphreys · 1996
6. Effect of interpass time on austenite grain refinement by means of dynamic recrystallization of austenite10.1007/BF02650254 ↗
7. Refinement of coarse grained austenite in Nb-V-Ti microalloyed steel during roughing rolling10.1179/1743281214Y.0000000205 ↗
8. Modeling recrystallization of microalloyed austenite: effect of coupling recovery, precipitation and recrystallization10.1016/S1359-6454(02)00097-6 ↗
9. Zurob · 2003
10. Quantitative criterion for recrystallization nucleation in single-phase alloys: prediction of critical strains and incubation times10.1016/j.actamat.2006.04.028 ↗
11. Gladman · 1997
12. Suppression of strain-induced precipitation of NbC by epitaxial growth of NbC on pre-existing TiN in Nb-Ti microalloyed steel10.1016/j.matdes.2017.07.006 ↗
13. Influence of alloying elements in solution on static recrystallization kinetics of hot deformed steels10.2355/isijinternational.36.1063 ↗
14. Effect of molybdenum, niobium, and vanadium on static recovery and recrystallization and on solute strengthening in microalloyed steels10.1007/BF02662364 ↗
15. Effect of manganese on recrystallisation kinetics of niobium microalloyed steel10.1179/026708302225001859 ↗
16. Modeling the effect of solute drag on recovery and recrystallization during hot deformation of Nb microalloyed steels10.2355/isijinternational.50.239 ↗
17. Frost · 1982
18. Recovery revisited10.1016/0956-7151(94)00409-9 ↗
19. Recovery of AlMg alloys: flow stress and strain-hardening properties10.1016/S1359-6454(98)00350-4 ↗
20. Diffusion in iron, jernkont
21. Effects of particles and solutes on strength, work-hardening and ductile fracture of aluminium alloys10.1016/j.mechmat.2014.08.006 ↗
22. The coupled effect of grain size and solute on work hardening of Cu-Ni alloys10.1080/09500839.2015.1122242 ↗
23. Formulation of flow stress of Nb added steels by considering work-hardening and dynamic recovery10.2355/isijinternational.36.467 ↗
24. Activation volume and activation-energy for deformation of Nb HSLA steels10.1016/0956-716X(94)90186-4 ↗
25. Mechanistic models for the activation volume and rate sensitivity in metals with nanocrystalline grains and nano-scale twins10.1016/j.actamat.2005.03.047 ↗
26. The strain-rate sensitivity of the plastic properties of α-iron at high temperatures10.1080/14786436908216335 ↗
27. Variation of activation volume with temperature for Fe, Si, and Ge10.1016/S0167-577X(03)00310-0 ↗
28. Creep and stress relaxation studies with polycrystalline magnesium10.1080/14786436608212610 ↗
29. The recrystallization process in some polycrystalline metals10.1098/rspa.1962.0080 ↗
30. A novel approach to model static recrystallization of austenite during hot rolling of Nb microalloyed steel. Part I: precipitate-free case10.1007/s11661-012-1526-5 ↗
31. Mobility of low-angle grain boundaries in pure metals10.1080/14786435.2010.481272 ↗