Effects of subsequent treatments on the microstructure and mechanical properties of SKD11 tool steel samples processed by multi-stage thixoforging
Source abstract
Abstract
Abstract In this study, multi-stage thixoforging and subsequent heat treatments of SKD11 tool steel samples were physically simulated by experiments. The microstructure and mechanical properties of various regions in the multi-stage thixoforged SKD11 samples before and after different heat treatments were investigated. The effects of the heat treatments on the former solid and liquid areas of the multi-stage thixoforged SKD11 sample were quite different, because the contents of alloying elements and microstructural morphologies in these areas were different. Static recrystallization of austenite, precipitation of carbides, growth of austenite, dissolution of carbides, and martensitic transformation occurred sequentially in the former solid areas of the multi-stage thixoforged SKD11 sample during annealing, quenching, and tempering. The values of the residual stress and volume fractions of austenite and martensite in the former solid areas changed significantly by the above microstructural evolution sequence. However, heat treatments slightly affected the volume fraction, distribution, and morphology of the carbides in the former liquid areas of the multi-stage thixoforged SKD11 sample. The mechanical properties of the centre regions of the multi-stage thixoforged SKD11 samples were adjustable during heat treatment because of the low volume fraction (approximately 10%) and dispersed distribution of the carbides in these regions. It is difficult to improve the mechanical properties of the edges of multi-stage thixoforged SKD11 samples by heat treatments owing to the high volume fraction (approximately 45%) and net-shaped morphologies of the carbides in these regions because they were abundant in the former liquid phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Bhadeshia · 2017 · 2
2. Atkinson · 2010 · 13
3. Semi-solid rolling process of steel strips10.1016/j.jmatprotec.2007.06.079 ↗
4. The effect of anisotropic dimensional change on the precision of steel parts produced by powder metallurgy10.1016/j.jmatprotec.2012.02.009 ↗
5. Ultrasonic additive manufacturing of steel: method, post-processing treatments and properties10.1016/j.jmatprotec.2018.02.001 ↗
6. Thixoforging of a high performance HP9/4/30 steel10.1016/j.msea.2004.12.013 ↗
7. Effect of inverse peritectic reaction on microstructural spheroidization in semisolid state10.1016/j.jmatprotec.2007.12.106 ↗
8. Mechanical properties of thixoformed hypoeutectic gray cast iron10.1016/j.jmatprotec.2015.07.015 ↗
9. Microstructural evolution and flow stress of semisolid type 304 stainless steel10.1016/j.jmatprotec.2004.07.063 ↗
10. Semi-solid forging of 100Cr6 and X210CrW12 steel10.1016/S0007-8506(07)60097-3 ↗
11. Deformation behavior of high strength X210CrW12 steel after semi-solid processing10.1016/j.msea.2014.01.099 ↗
12. Microstructural evolution during RAP process and deformation behavior of semisolid SKD61 tool steel10.1016/j.jmatprotec.2012.04.003 ↗
13. Liquid segregation behavior of semi-solid AZ91 alloy during back extrusion test10.1016/j.jallcom.2008.10.149 ↗
14. Controlling liquid segregation of semi-solid AZ80 magnesium alloy by back pressure thixoextruding10.1016/j.jmatprotec.2018.04.023 ↗
15. Study on the effects of forming conditions on microstructural evolution and forming behaviors of Cr-V-Mo tool steel during multi-stage thixoforging by physical simulation10.1016/j.jmatprotec.2017.05.039 ↗
16. Controlled semisolid forging of aluminium alloys using mechanical servo press to manufacture products with homo- and heterogeneous microstructures10.2320/matertrans.M2013098 ↗
17. Structure and properties of a hypoeutectic chromium steel processed in the semisolid state10.1016/j.actamat.2006.02.021 ↗
18. Effects of heat treatment on microstructure and mechanical properties of Cr–V–Mo steel processed by recrystallization and partial melting method10.1016/j.jmatprotec.2013.08.001 ↗
19. On the microstructure and properties of 100Cr6 steel processed in the semisolid state10.1016/j.actamat.2007.08.010 ↗
20. Roberts · 1998 · 67
21. Microstructural evolution during partial melting and semisolid forming behaviors of two hot-rolled Cr–V–Mo tool steels10.1016/j.jmatprotec.2015.05.031 ↗
22. The effect of carbon content on the c/a ratio of as-quenched martensite in Fe-C alloys10.1016/j.msea.2017.05.094 ↗
23. Orientation of austenite reverted from martensite in Fe-2Mn-1.5Si-0.3C alloy10.1016/j.actamat.2017.11.003 ↗
24. Thixo diecasting process for fabrication of thin-type component with wrought aluminum alloys and its formability limitation10.1016/j.jmatprotec.2004.03.032 ↗
25. Experimental investigation of the thixoforging of tubes of low-carbon steel10.1016/j.jmatprotec.2017.10.003 ↗