Influence of high-energy ball milling on Mg-PSZ-reinforced TRIP steel-matrix composites synthesized by FAST / SPS
Source abstract
Abstract
Abstract A composite with a high-alloy steel matrix was reinforced with varying amounts of Mg-PSZ and synthesized using Spark Plasma Sintering (SPS) technology. To prepare the powders for sintering, they were mixed in a planetary ball mill at two different rates of 100 rpm and 250 rpm. The influence of the rotation speed on the microstructures and compressive strengths of the sintered composites was investigated. Due to the high degree of deformation of the steel powder particles during milling at 250 rpm, the steel phase underwent grain refinement during SPS. Furthermore, the Mg-PSZ was more homogeneously distributed within the steel matrix and mechanically interlocked with the steel matrix. Thus, the compressive strength of the composite increased with increasing Mg-PSZ content and increasing rotation speed during milling of the powder due to grain refinement and the improved strength of the steel/ceramic interface. Furthermore, a larger amount of Mg-PSZ underwent stress-induced transformation under compressive loading.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Effects of load mode on mechanical properties of ZrO2 (2Y)/TRIP steel composites
2. Development of 3Y-PSZ/AISI 316L composites for joint prostheses10.2320/matertrans.45.3209 ↗
3. Thermal transport properties of stainless steel/zirconia compacts as a function of composition and temperature10.4028/www.scientific.net/MSF.492-493.567 ↗
4. Development of large-size ceramic/metal bulk FGM fabricated by spark plasma sintering//development of large-size ceramic/metal bulk FGM fabricated by spark plasma sintering10.4028/www.scientific.net/MSF.308-311.83 ↗
5. Influence of material composition on mechanical properties and fracture behavior of ceramic-metal composites10.4028/www.scientific.net/KEM.297-300.1516 ↗
6. Energy-absorbing TRIP-steel/Mg-PSZ composite honeycomb structures based on ceramic extrusion at room temperature10.1111/j.1744-7402.2008.02321.x ↗
7. Microstructure and compression strength of novel TRIP-steel/Mg-PSZ composites10.1002/adem.200900210 ↗
8. Influence of matrix strength and volume fraction of Mg-PSZ on the cyclic deformation behavior of hot pressed TRIP/TWIP-matrix composite materials10.1002/adem.201200334 ↗
9. Influence of manganese and nickel on the ά martensite transformation temperatures of high alloyed Cr-Mn-Ni steels10.1002/srin.201100063 ↗
10. Effect of manganese on microstructure and mechanical properties of cast high alloyed CrMnNi-N steels10.1002/adem.201200318 ↗
11. The influence of strain rate on the microstructure transition of 304 stainless steel10.1016/j.actamat.2011.03.005 ↗
12. Dependence of martensite start temperature on fine austenite grain size10.1016/j.scriptamat.2007.09.017 ↗
13. Tensile behavior of intercritically annealed 10 pct Mn multi-phase steel10.1007/s11661-013-2047-6 ↗
14. Effects of strain state and strain rate on deformation-induced transformation in 304 stainless steel: Part II. Microstructural study10.1007/BF02644428 ↗
15. Inelastic deformation of Mg-PSZ and its significance for strength-toughness relationship of zirconia toughened ceramics10.1016/0001-6160(85)90131-2 ↗
16. Reinforcing mechanism of Mg-PSZ particles in highly-alloyed TRIP steel10.1002/srin.201100099 ↗
17. The effect of electric field and pressure on the synthesis and consolidation of materials: a review of the spark plasma sintering method10.1007/s10853-006-6555-2 ↗
18. Field-Assisted sintering technology/spark plasma sintering: mechanisms, materials, and technology developments10.1002/adem.201300409 ↗
19. Consolidation/synthesis of materials by electric current activated/assisted sintering10.1016/j.mser.2008.09.003 ↗
20. Spark plasma sintering and strength behavior under compressive loading of Mg-PSZ/Al2O3-TRIP-steel composites10.4028/www.scientific.net/MSF.825-826.182 ↗
21. Schatt · 2007
22. Kainer · 2010
23. Improved mechanical properties by high-energy milling and Spark Plasma Sintering of a TRIP-matrix composite10.1177/0021998315597482 ↗
24. Influence of high-energy milling and heat treatment on the thermal and mechanical properties of a ZrMgMo3O12p/2024Al composite10.1016/j.ceramint.2019.04.047 ↗
25. Microstructural evolution of 316L stainless steels with yttrium addition after mechanical milling and heat treatment10.1016/j.msea.2015.09.011 ↗
26. Production and characterization of a tool steel-PSZ composite by mechanical alloying and spark plasma sintering10.1016/j.jallcom.2017.03.203 ↗
27. Rahaman · 2003
28. Screening of the interactions between Mg-PSZ and TRIP-steel and its alloys during sintering10.1002/adem.200900303 ↗
29. Influence of the sulfur content on the mechanical properties of a TRIP/TWIP-Matrix composite reinforced with 10 vol% Mg-PSZ10.1002/adem.201400548 ↗
30. Deformation bands in high-alloy austenitic 16Cr6Mn6Ni TRIP steel: phase transformation and its consequences on strain hardening at room temperature10.1002/srin.201500005 ↗
31. Strain rate dependent flow stress and energy absorption behaviour of cast CrMnNi TRIP/TWIP steels10.1002/srin.201100067 ↗
32. The deformation and ageing of mild steel: III Discussion of results10.1088/0370-1301/64/9/303 ↗