Thermo-mechanical fatigue evaluation of a thermal barrier coating bond-coatless system
Source abstract
Abstract
Thermal barrier coating systems are often subjected to complex thermo-mechanical loading involving a combination of mechanical stresses under complex thermal gradients, in addition to the contribution of oxidation to the damage processes. Recently, a thermal-barrier coating bond-coatless system has been developed using prior-surface treatments. Atmospheric plasma spray (APS) Yttria-Stabilized-Zirconia (YSZ) is deposited on the AM1 nickel-based single crystalline superalloy substrate. The substrate has been either grit-blasted or laser textured before thermal spraying. The durability of these systems are investigated performing out-of-phase load controlled thermo-mechanical fatigue (TMF) tests in the 500–1100 °C and 120–700 MPa temperature and stress ranges. The contribution of a prior thermal over-aging of 200 h at 1100 °C has also been investigated. The damage mechanisms during out-of-phase TMF of the different TBC bond-coat-less systems have been studied and compared to the ones obtained during isothermal creep at 1100 °C/120 MPa. It is shown that a prior thermal over-aging favors cycling ratcheting during TMF cycling due to the degradation of the substrate microstructure. In addition, the coating damage mechanisms are observed to depend on the prior-surface treatment and thermal over-aging. Cracks perpendicular to the interface in the top coat have been observed whatever the specimens and microstructural state. Top coats are debonded for grit-blasted substrates while crack bifurcation above key holes is observed for laser textured substrates, leading to a better top coat TMF durability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Ceramic materials for thermal barrier coatings10.1016/S0955-2219(03)00129-8 ↗
2. Thermal barrier coating materials10.1016/S1369-7021(05)70934-2 ↗
3. Article - R.Eriksson - TBC bonding coat top coat interface roughness.pdf
4. Oxidation and degradation of a plasma-sprayed thermal barrier coating system10.1016/S0257-8972(96)02985-4 ↗
5. Jackson · 2010
6. Modeling decohesion of a top-coat from a thermally-growing oxide in a thermal barrier coating10.1016/j.surfcoat.2013.02.005 ↗
7. An analytical model of rumpling in thermal barrier coatings10.1016/j.jmps.2004.11.002 ↗
8. Tensile adhesion testing methodology for thermally sprayed coatings10.1007/BF02834068 ↗
9. High temperature durability of a bond-coatless plasma-sprayed thermal barrier coating system with laser textured Ni-based single crystal substrate10.1016/j.surfcoat.2018.01.006 ↗
10. Fracture behavior under mixed-mode loading of ceramic plasma-sprayed thermal barrier coatings at ambient and elevated temperatures10.1016/j.engfracmech.2005.01.010 ↗
11. Issues related to the constitutive modeling of Ni-based single crystal superalloys under aeroengine certification conditions
12. Thermo-mechanical stress analysis of thermal barrier coating system considering thickness and roughness effects
13. Numerical simulation procedure for modeling TGO crack propagation and TGO growth in thermal barrier coatings upon thermal-mechanical cycling10.1155/2014/491930 ↗
14. Numerical simulation of AM1 microstructure
15. Laser patterning pretreatment before thermal spraying: a technique to adapt and control the surface topography to thermomechanical loading and materials10.1007/s11666-015-0352-x ↗
16. Laser surface patterning to enhance adhesion of plasma sprayed coatings surface and coatings technology10.1016/j.surfcoat.2017.05.007 ↗
17. Role of powder granulometry and substrate topography in adhesion strength of thermal spray coatings10.1007/s11666-016-0411-y ↗
18. Thermal creep resistance of nickel based single crystal superalloys
19. Damage mechanisms in an EB-PVD thermal barrier coating system during TMF and TGMF testing conditions under combustion environment10.1016/j.ijfatigue.2016.08.001 ↗
20. Development and use of a new burner rig facility to mimic service loading conditions of Ni-based single crystal superalloys
21. Nouveau moyen de caractérisation des matériaux: conditions extrêmes et sollicitations thermomécaniques proches des conditions d’usages
22. Effect of very high temperature short exposures on the dissolution of the γ′ phase in single crystal MC2 superalloy10.1007/s10853-007-1645-3 ↗
23. Strain effect on the γ′ dissolution at high temperatures of a nickel-based single crystal superalloy10.1007/s11661-012-1397-9 ↗
24. In situ measurement of the precipitate volume fraction and interfacial lattice misfit during non-isothermal creep in the superalloy CMSX-410.1016/j.msea.2018.10.033 ↗
25. Effect of long term aging on microstructure and stress rupture properties of a nickel based single crystal superalloy10.1016/j.pnsc.2012.10.004 ↗
26. Creep of CMSX-4 superalloy single crystals: effects of rafting at high temperature10.1016/S1359-6454(99)00217-7 ↗
27. High temperature creep degradation of the AM1/NiAlPt/EBPVD YSZ system10.1007/s11661-013-1961-y ↗
28. The effect of thermal exposure on the properties of a Ni-base superalloy10.1016/j.msea.2009.10.001 ↗
29. Effect of thermal exposure on stress rupture properties of a Re bearing Ni base single crystal superalloy10.1016/j.msea.2009.10.001 ↗
30. Creep behavior under isothermal and non-isothermal conditions of AM3 single crystal superalloy for different solutioning cooling rates10.1016/j.msea.2014.02.046 ↗
31. A tensorial thermodynamic framework to account for the gamma' rafting in nickel-based single crystal superalloys10.1016/j.ijplas.2017.03.010 ↗
32. Deformation and damage mechanisms during thermal–mechanical fatigue of a single-crystal superalloy10.1016/j.actamat.2009.01.027 ↗
33. Oxidation characteristics of a platinized MCrAlY bond coat for TBC systems during cyclic oxidation at 1000°C10.1016/j.surfcoat.2004.11.038 ↗
34. Influence of Pt addition and manufacturing process on the failure mechanisms of NiCoCrAlYTa-base thermal barrier coating systems under thermal cycling conditions10.3390/met8100771 ↗
35. Kromer · 2016
36. Mechanisms controlling the durability of thermal barrier coatings10.1016/S0079-6425(00)00020-7 ↗
37. Okazaki · 2012
38. On TMF damage, degradation effects, and the associated T-Min influence on TMF test results in gamma/gamma' alloys
39. Reed · 2006
40. Cyclic oxidation of coated and uncoated single-crystal nickel-based superalloy MC2 analyzed by continuous thermogravimetry analysis10.1016/j.actamat.2006.05.034 ↗
41. Effect of the prior microstructure degradation on the high temperature/low stress non-isothermal creep behavior of CMSX-4 Ni-based single crystal superalloy
42. Very high temperature creep behavior of a single Ni-based superalloy under complex thermal cycling conditions10.1080/09500839.2010.489887 ↗
43. Non-isothermal creep at very high temperature of the nickel based single crystal superalloy MC210.1016/j.actamat.2007.07.048 ↗
44. Creep of e nickel-based single cristal superalloy during very high temperature jumps followed by synchrotron x-ray diffraction10.1016/j.actamat.2014.10.036 ↗
45. Investigating the dislocation-driven micro-mechanical response under non-isothermal creep conditions in single-crystal superalloys10.1007/s11661-018-4764-3 ↗
46. Grain boundary–slip bands interactions: impact on the fatigue crack initiation in a polycrystalline forged Ni-based superalloy10.1016/j.actamat.2015.08.009 ↗
47. Mechanical behavior and damage processes of Udimet 720Li: influence of localized plasticity at grain boundaries
48. Riallant · 2014
49. Microstructure evolution of a pre-compression nickel-base single crystal superalloy during tensile creep10.1016/j.msea.2008.12.006 ↗
50. Microstructural evolution of 7 wt.% Y2O3–ZrO2thermal barrier coatings due to stressrelaxation at elevated temperatures and the concomitant changes in thermal conductivity10.1016/j.surfcoat.2010.06.007 ↗
51. Effect of heat-treatment on stress relaxation behavior of plasma-sprayed 7 wt.% Y2O3–ZrO2 stand-alone coatings10.1016/j.surfcoat.2010.11.040 ↗
52. TBCs for gas turbines under thermomechanical loadings: failure behaviour and life prediction
53. Thermo-mechanical fatigue failure of thermal barrier coated superalloy specimen10.1007/s11661-015-2996-z ↗
54. Fatigue cracks in a thermal barrier coating system on a superalloy in multiaxial thermomechanical testing10.1016/j.ijfatigue.2007.01.037 ↗
55. Effects of three-dimensional coating interfaces on thermo-mechanical stresses within plasma spray thermal barrier coatings10.1016/j.matdes.2017.03.067 ↗
56. Finite element simulation of stresses in a plasma-sprayed thermal barrier coating with a crack at the TGO/bond-coat interface10.1016/j.surfcoat.2018.01.024 ↗