journal article·2019-05

On the evaluation of certain strength characteristics and fracture features of iron-based sintered MMCs with nanooxide additives

Eugene E. Feldshtein, Larisa N. Dyachkova, Grzegorz M. Królczyk

Publisher page

Abstract

Abstract This paper describes the changes in the mechanical properties and fracture character of ironbased composites with alumina and zirconia nanoadditives. To assess the effect of nanooxide additives one of the design of experiments methods viz the Simplex Lattice Design have been used. It was found that with the introduction of nanooxides, zones of both high and low hardness can be formed depending on their composition. The presence of nanoadditives affects the character of the stress-strain dependences and the breaking flexural and compressive stresses. The introduction of alumina nanoparticulates into the base material has a negative effect on the breaking stresses when compression and flexing, and zirconia nanoparticulates, on the contrary, substantially increase these stresses. The nanoadditives composition affects significantly the nature of MMCs based on iron fractures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Farag · 2013
2. Chawla · 2013
3. Contribution of machining to the fatigue behaviour of metal matrix composites (MMCs) of varying reinforcement size10.1016/j.ijfatigue.2017.04.018 ↗
4. Fracture and fatigue life of Al-based MMCs machined at different conditions10.1016/j.engfracmech.2018.01.013 ↗
5. Residual stress generation in metal matrix composites after cooling10.1080/02670836.2018.1458460 ↗
6. Experimental investigations on mechanical and tribological properties of extruded aluminium A356-AL2O3 stir cast MMC
7. The effects of Cr particles addition on the aging behavior and mechanical properties of SiCp/7075Al composites10.1016/j.matchar.2017.12.030 ↗
8. Effect of particle size on mechanical and tribological behavior of LM4/SiCp based MMC
9. Effect of SiC and TiC nanoparticle reinforcement on the microstructure, microhardness, and tensile performance of AA6082-T6 friction stir welds10.1007/s00170-017-1446-z ↗
10. Mechanical, structural and corrosion behaviour of AlMg4.5/Nano Al2O3 metal matrix composites
11. Influence of ceramic particulate type on microstructure and tensile strength of aluminum matrix composites produced using friction stir processing10.1016/j.jascer.2016.04.002 ↗
12. Study on the mechanical and drilling properties of AA7039 composites reinforced with Al2O3/B4C/SiC particles10.1016/j.compositesb.2016.02.054 ↗
13. Residual stress induced mechanical property enhancement in steel encapsulated light metal matrix composites10.1016/j.msea.2017.05.073 ↗
14. Production and mechanical properties of nano SiC particle reinforced Ti−6Al−4V matrix composite10.1016/S1003-6326(17)60009-8 ↗
15. Strength and tribological properties of sintered powder composite materials based on copper with addition of alumina and nickel oxide
16. On the properties of composites based on sintered bronze with alumina additives10.1016/j.compositesb.2012.07.024 ↗
17. On some mechanical properties and wear behavior of sintered bronze based composites reinforced with some aluminides microadditives10.1515/ijame-2017-0017 ↗
18. On the properties and tribological behaviors of P/M iron based composites reinforced with ultrafine particulates10.1016/j.compositesb.2013.10.015 ↗
19. Determination of mechanical behaviour of Fe-CNT MMC
20. Reinforcing cast iron with composite insert10.1515/amm-2017-0054 ↗
21. Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics10.1016/j.jmrt.2015.05.003 ↗
22. Characterization of hybrid aluminum matrix composites for advanced applications – a review10.1016/j.jmrt.2015.05.004 ↗
23. Synthesis and characterization of sintered hybrid aluminium matrix composites reinforced with nanocopper oxide particles and microsilicon carbide particles10.1016/j.compositesb.2013.10.060 ↗
24. Optimization of influential parameters on mechanical behaviour of AlMg1 SiCu hybrid metal matrix composites using Taguchi integrated fuzzy approach
25. Effect of graphite and SiC addition into Cu and SiC particle size effect on fabrication of Cu–Graphite–SiC MMC by powder metallurgy10.1007/s12666-016-1026-1 ↗
26. Effect of copper content on tribological characteristics of Fe-C-Cu composites10.3103/S1068366618010063 ↗
27. Synergy effect of ultrafine tungsten, silicon carbides, and graphite microadditives on the Fe-based MMCs properties using the simplex lattice design10.1016/j.jallcom.2018.05.061 ↗
28. Effects of electrospinning parameters on titanium dioxide nanofibers diameter and morphology: an investigation by Box–Wilson central composite design (CCD)10.1016/j.cej.2012.08.087 ↗
29. Multi-factorial models of a carbon fibre/epoxy composite subjected to accelerated environmental ageing10.1016/j.compstruct.2013.12.028 ↗
30. Investigation of bolted/bonded composite joint behavior using design of experiments10.1016/j.compstruct.2017.02.084 ↗
31. Mix design process of polyester polymer mortars modified with recycled GFRP waste materials10.1016/j.compstruct.2013.05.023 ↗
32. Technological heredity when roller burnishing of ductile cast iron
33. Optimized synthesis and characterization of lutetium carbonate and oxide nanoparticles and their use as degradation photocatalyst10.1007/s10854-017-7634-7 ↗
34. Design and optimisation of glass–celsian composites10.1016/j.compositesa.2005.05.037 ↗
35. Analysis and improved process response prediction of laser-assisted automated tape placement with PA-6/carbon tapes using Design of Experiments and numerical simulations10.1016/j.compositesa.2017.02.008 ↗
36. Optimum stacking sequence design of composite materials Part I: constant stiffness design10.1016/j.compstruct.2009.01.006 ↗
37. Box · 2007
38. A modified path of steepest ascent for split-plot experiments10.1080/00224065.2005.11980302 ↗
39. Montgomery · 2013
40. The simplex-centroid design for experiments with mixtures10.1111/j.2517-6161.1963.tb00506.x ↗
41. Cornell · 2002
42. On the effectiveness of multi-component laser modifying of Fe-based self-fluxing coating with hard particulates10.1016/j.surfcoat.2016.08.068 ↗
43. Stabilization of refining slag by adjusting its phase composition and giving it the properties of mineral binders10.1007/s11148-017-0104-1 ↗