journal article·2019-01

Effect of thermal cycling on the mechanical properties of carbon nanotubes reinforced copper matrix nanolaminated composites

Jiapeng Liu, Ding-Bang Xiong, Yishi Su, Qiang Guo, Zhiqiang Li, Di Zhang

Publisher page

Abstract

Abstract The effect of thermal cycling on the mechanical properties of metal matrix composites (MMCs) reinforced with micro-fillers have been studied for a long time, but that for nano-size-reinforcements remains largely unexplored, such as carbon nanotubes (CNTs). We have fabricated CNTs/Cu laminated MMCs with well-balanced tensile strength and elongation via flake powder metallurgy. In this work, the effect of thermal cycling on their mechanical properties are investigated in a temperature range of –196/+ 200 °C. The thermal cycling results in reductions in strength and elongation and modulus, but the strengthening role of CNTs remains in some extents as compared to the pure Cu counterpart. Tensile tests at room temperature show that high strain hardening ability can be regained even after a sharp stress drop in the thermally cycled composites. The observations on transmission electron microscope (TEM) and scanning electron microscope (SEM) show that the amount of crack increases gradually in the composites upon thermal cycling. Nevertheless, CNT bridges are often found bestriding the cracks and impeding their propagating. The TEM results indicate high density of dislocation in the Cu matrix after thermal cycling, but it decreases after enough thermal cycles, which might be attributed to the stress releasing caused by crack propagation. The failure mode is dominated by the inter-carbon-layer fracture of the multi-walled CNTs in the composites subjected to thermal cycling and tensile loading.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Extraordinary strengthening effect of carbon nanotubes in metal-matrix nanocomposites processed by molecular-level mixing10.1002/adma.200401933 ↗
2. The use of flake powder metallurgy to produce carbon nanotube (CNT)/aluminum composites with a homogenous CNT distribution10.1016/j.carbon.2011.12.057 ↗
3. Enhanced strength and excellent transport properties of a super aligned carbon nanotubes reinforced copper matrix laminar composite10.1016/j.compositesa.2016.05.027 ↗
4. Mechanical and electrical properties of carbon- nanotube-reinforced Cu–Ti alloy matrix composites10.1002/pssa.201228549 ↗
5. Electrical and mechanical properties of carbon nanotube reinforced copper nanocomposites fabricated by electroless deposition process10.1016/j.msea.2009.01.073 ↗
6. Beyond the dimensional limitation in bio-inspired composite: insertion of carbon nanotubes induced laminated Cu composite and the simultaneously enhanced strength and toughness10.1016/j.carbon.2018.01.006 ↗
7. Balancing the strength and ductility of carbon nanotubes reinforced copper matrix composites with microlaminated structure and interdiffusion interface10.1016/j.msea.2017.12.044 ↗
8. High-strength laminated copper matrix nanocomposites developed from a single-walled carbon nanotube film with continuous reticulate architecture10.1002/adfm.201201532 ↗
9. Sandwich-type laminated nanocomposites developed by selective dip-coating of carbon nanotubes10.1002/adma.200600908 ↗
10. Thermal cycling studies of a cross-plied P100 graphite fibre-reinforced 6061 aluminum composite laminate10.1007/BF01113908 ↗
11. Enhanced plasticity in metal matrix composites during thermal cycling under load10.1016/S0921-5093(97)00351-1 ↗
12. Analysis of instantaneous thermal expansion coefficient curve during thermal cycling in short fiber reinforced AlSi12CuMgNi composites10.1016/j.compscitech.2004.07.002 ↗
13. Thermal cycling behavior of an extruded aluminum alloy/SiCp composite10.1016/j.compositesb.2004.02.007 ↗
14. Effect of thermal cycling on the mechanical properties of Cf/Al composites10.1016/j.msea.2013.05.023 ↗
15. The effect of thermal cycling on the properties of a carbon fibre reinforced magnesium composite10.1016/j.msea.2005.02.025 ↗
16. Effect of thermal cycling on the microstructure of continuous carbon fibre reinforced copper matrix composites10.1016/S1359-835X(98)00200-0 ↗
17. Thermal degradation of the tensile strength of unidirectional boron/aluminum composites10.1007/BF02646574 ↗
18. Thermal cycling induced deformation and damage in carbon fiber reinforced copper composite10.1016/S1359-6462(01)01217-9 ↗
19. The effect of thermal cycling and isothermal exposure on the mechanical properties of SiC particle reinforced Al composites10.1177/0021998302036017979 ↗
20. Enhanced mechanical properties and high electrical conductivity in multiwalled carbon nanotubes reinforced copper matrix nanolaminated composites10.1016/j.msea.2018.05.091 ↗
21. Damage accumulation in a carbon fiber fabric reinforced cyanate ester composite subjected to mechanical loading and thermal cycling10.1016/j.compositesb.2015.09.054 ↗
22. Microstructures and flexural properties of C/C composites doped with CNTs by electrophoretic deposition10.15541/jim20150301 ↗
23. Preparation and characterization of graphene/carbon nanotube hybrid thin films by drop-coating10.15541/jim20160299 ↗
24. Simultaneously enhancing strength and ductility of carbon nanotube/aluminum composites by improving bonding conditions10.1016/j.scriptamat.2015.11.011 ↗
25. Fabrication of CNT/Cu composites with enhanced strength and ductility by SP combined with optimized SPS method10.1016/j.jallcom.2018.03.029 ↗
26. Mechanical properties of carbon nanotube-copper nanocomposites10.1088/0960-1317/18/3/035013 ↗
27. Mechanical characterization of copper coated carbon nanotubes reinforced aluminum matrix composites10.1016/j.matchar.2013.09.006 ↗
28. Graphene-and-copper artificial nacre fabricated by a preform impregnation process: bioinspired strategy for strengthening-toughening of metal matrix composite10.1021/acsnano.5b01067 ↗
29. A combination of ball milling and high-ratio differential speed rolling for synthesizing carbon nanotube/copper composites10.1016/j.carbon.2013.04.105 ↗
30. In-situ space-confined synthesis of well-dispersed three-dimensional graphene/carbon nanotube hybrid reinforced copper nanocomposites with balanced strength and ductility10.1016/j.compositesa.2017.09.010 ↗
31. Damage of short-fiber-reinforced metal matrix composites considering cooling and thermal cycling10.1115/1.482788 ↗
32. Effect of vacuum thermal cycling on the compression and shear performance of composite sandwich structures containing pyramidal truss cores10.1016/j.compscitech.2018.01.042 ↗
33. Role of interfacial and matrix creep during thermal cycling of continuous fiber reinforced metal–matrix composites10.1016/S1359-6454(99)00402-4 ↗
34. Investigation of bulk damage progression and inspection for GFRP laminate properties10.1007/s11665-011-0002-5 ↗
35. Study of damage induced by extreme thermal cycling in cyanate ester laminates and sandwich panels10.1177/0021998316666937 ↗
36. Load transfer strengthening in carbon nanotubes reinforced metal matrix composites via in-situ tensile tests10.1016/j.compscitech.2015.03.009 ↗
37. Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load10.1126/science.287.5453.637 ↗
38. Lateral size effect of graphene on mechanical properties of aluminum matrix nanolaminated composites10.1016/j.scriptamat.2017.06.018 ↗
39. Aligning graphene in bulk copper: nacre-inspired nanolaminated architecture coupled with in-situ processing for enhanced mechanical properties and high electrical conductivity10.1016/j.carbon.2017.02.089 ↗
40. Preparation and property of MXene/copper alloy composites10.15541/jim20170297 ↗