journal article·2018-05

Relationship between texture development and deformation twinning activity in Ti-15Mo alloy

Y.-D. Im, Y.-K. Lee, K.-H. Song

Publisher page

Abstract

Abstract This study was performed to evaluate the effect of rolling speed on the development of texture and mechanical properties in a Ti-15(wt%)Mo alloy. Plates were initially prepared with dimensions of 100 mm (l) × 60 mm (w) × 15 mm (t) and rolled to an 88% thickness reduction. To induce the different shear strains between the surface and center of the plates, the rolling speed was varied between 3 and 56 m/min, respectively. The rolled materials were subsequently annealed at 1173 K for 60 s to obtain a recrystallized microstructure. To evaluate the mechanical properties such as yield and tensile strength as well as elongation and strain hardening, tensile tests were conducted on the rolled alloys. In addition, the texture of the rolled and annealed materials was analyzed by X-ray diffraction, and the characteristic grain boundary distribution was analyzed by electron back-scattered diffraction. It was found that different rolling speeds led to different texture development. Specifically, the γ-fiber component developed for the material rolled at low speed and contributed to the denser formation of {332} twins, resulting in the high strain hardening exponent (n = 0.386) and uniform elongation (eu = 0.362). In contrast, the θ-fiber component developed in the material rolled at high speed and exhibited a lower density of deformation twinning, which contributed to the lower strain hardening exponent (n = 0.320) and uniform elongation (eu = 0.314) relative to the alloy rolled at low speed. Therefore, it can be concluded that enhanced twinning density depends on texture development, which is deeply related to the Schmid factor of the grains.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Magnesium Alloys: Properties and Applications · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. State-of-the-science of high manganese TWIP steels for automotive applications
2. Some aspects of high manganese twinning-induced plasticity (TWIP) steel, a review10.1007/s40195-012-0501-x ↗
3. Changeable Young's modulus with large elongation-to-failure in β-type titanium alloys for spinal fixation applications10.1016/j.scriptamat.2014.03.014 ↗
4. Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects10.1016/j.actamat.2013.07.019 ↗
5. Tensile behavior and cold workability of Ti-Mo alloys10.2320/matertrans.45.1571 ↗
6. Martensitic microstructures and mechanical properties of as-quenched metastable β-type Ti–Mo alloys10.1007/s10853-016-9976-6 ↗
7. A new titanium alloy with a combination of high strength, high strain hardening and improved ductility10.1016/j.scriptamat.2014.09.005 ↗
8. Orientation dependence of twinning and strain hardening behaviour of a high manganese twinning induced plasticity steel with polycrystalline structure10.1016/j.actamat.2011.08.031 ↗
9. Enhanced uniform elongation by pre-straining with deformation twinning in high-strength β-titanium alloys with an isothermal ω-phase10.1080/09500839.2012.725949 ↗
10. Dependence of deformation twinning on grain orientation in a high manganese steel10.1016/j.scriptamat.2006.06.004 ↗
11. S. Suwas, N.P. Gurao, Crystallographic texture in Materials, 2012.
12. Analysis of deformation textures of asymmetrically rolled steel sheets10.1016/S0020-7403(01)00025-X ↗
13. Analysis of microstructure and texture evolution in pure magnesium during symmetric and asymmetric rolling10.1016/j.actamat.2009.07.008 ↗
14. Deformation and texture evolution during high-speed rolling of AZ31 magnesium sheets10.2320/matertrans.L-MRA2007875 ↗
15. Rollett · 2004
16. Smallman · 2011
17. Relationship between rolling textures and shear textures in f.c.c. and b.c.c. metals10.1016/0956-7151(94)90283-6 ↗
18. Deformation behavior and texture development in beta Ti-V alloys10.1007/BF02642942 ↗
19. Texture and shape memory behavior of Ti–22Nb–6Ta alloy10.1016/j.actamat.2005.09.014 ↗
20. Orientation dependent slip and twinning during compression and tension of strongly textured magnesium AZ31 alloy10.1016/j.msea.2010.02.008 ↗
21. Articles on the physics and metallography of magnesiums
22. {332}〈113〉 Twinning system selection in a β-type Ti–15Mo–5Zr polycrystalline alloy10.1016/j.msea.2013.04.119 ↗
23. Twinning system selection in a metastable β-titanium alloy by Schmid factor analysis10.1016/j.scriptamat.2011.02.033 ↗
24. Beta type Ti–Mo alloys with changeable Young's modulus for spinal fixation applications10.1016/j.actbio.2012.02.004 ↗
25. Correlation of tensile properties, deformation modes, and phase stability in commercial β-phase titanium alloys10.1007/BF02825707 ↗
26. Twinning evolution as a function of loading direction in magnesium10.12693/APhysPolA.128.762 ↗
27. High manganese austenitic twinning induced plasticity steels: a review of the microstructure properties relationships10.1016/j.cossms.2011.04.002 ↗
28. Tensile properties and twinning behavior of high manganese austenitic steel with fine-grained structure10.1016/j.scriptamat.2008.06.050 ↗
29. The effects of Si on the mechanical twinning and strain hardening of Fe–18Mn–0.6C twinning-induced plasticity steel10.1016/j.actamat.2013.02.031 ↗
30. EBSD for analysing the twinning microstructure in fine‐grained TWIP steels and its influence on work hardening10.1111/j.1365-2818.2009.03182.x ↗
31. On the compressive deformation behavior of new beta titanium alloys designed by d-electron method10.1016/j.jallcom.2018.02.212 ↗
32. Strengthening strategy for a ductile metastable β-titanium alloy using low-temperature aging10.1080/21663831.2017.1350211 ↗