journal article·2018-02

Effect of compound addition of Nb-B on hot ductility of Cr-Mo alloy steel

Yaxu Zheng, Fuming Wang, Changrong Li, Jin Cheng, Yongliang Li

Publisher page

Abstract

Abstract The hot tensile tests were conducted in this study to investigate the combined effect of Nb and B on hot ductility of 25CrMo alloy steel in temperature range of 700–1100 °C with a strain rate of 0.5 s−1. Besides, the influences of DRX grains growth behavior, ferrite transformation, precipitates and B non-equilibrium segregation on hot ductility were also investigated by use of OM, FE-SEM, TEM, AES and SIMS. The results indicated that the amount of Nb(C,N) particles decreased with increasing deformation temperatures. Moreover, the precipitation of BN on Nb(C,N) particles, which precipitated in matrix abundantly rather than at grain boundaries, reduced stress acting on grain boundaries, and the coarsening BN particles precipitating on Nb(C,N) reduced the pining effect of fine Nb(C,N) particles on dislocations. Besides Nb(C,N) and BN particles, there were M2B, M23C6 and M7C3 precipitates in γ+α two-phase region. The mechanism for hot ductility improvement by compound addition of Nb-B in single phase austenite region was that although the DRX was retarded, the DRX grains were refined obviously by adding Nb and B. Meanwhile, the B atoms segregated rapidly to grain boundaries occupying the voids and enhancing grain boundary cohesion. Besides, the BN particles, precipitating on Nb(C,N) particles in matrix rather than at grain boundaries, reduced the adverse effects on hot ductility. The improvement of hot ductility in γ+α two-phase region was attributed to the restraint of ferrite transformation by the addition of B and the deformation induced precipitation of carbides, which consumed strengthening alloy elements in austenite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Dissolution and precipitation behaviors of boron bearing phase and their effects on hardenability and toughness of 25CrMoNbB steel10.1016/j.msea.2017.06.068 ↗
2. Effect of the induced ferrite and precipitates of Nb–Ti bearing steel on the ductility of continuous casting slab10.2355/isijinternational.54.1611 ↗
3. Precipitation and hot ductility of low C-V and low C-V-Nb microalloyed steels during thin slab casting10.1179/026708301101509665 ↗
4. The influence of composition on the hot ductility of steels and to the problem of transverse cracking10.2355/isijinternational.39.833 ↗
5. Effect of Ti and B microadditions on the hot ductility behavior of a high-Mn austenitic Fe-23Mn-1.5Al-1.3Si-0.5C TWIP steel10.1016/j.msea.2015.09.079 ↗
6. Effect of Nb and Mo on the hot ductility behavior of a high-manganese austenitic Fe-21Mn-1.3Al-1.5Si-0.5C TWIP steel10.1016/j.msea.2014.08.030 ↗
7. Hot ductility in Nb-bearing high-strength low-alloy steels10.2355/isijinternational1966.22.181 ↗
8. Effect of niobium and titanium addition on the hot ductility of boron containing steel10.1016/j.msea.2011.01.097 ↗
9. Effect of rare earth cerium and impurity tin on the hot ductility of a Cr-Mo low alloy steel10.1016/S1002-0721(16)60135-7 ↗
10. Influence of B and Ti on hot ductility of high Al and high Al, Nb containing TWIP steels10.1179/1743284713Y.0000000259 ↗
11. Effect of boron on the hot ductility of Nb-containing steel10.1007/s11661-002-0133-2 ↗
12. The effect of boron on hot ductility of Nb-microalloyed steels10.2355/isijinternational.46.591 ↗
13. Hot ductility behavior of boron microalloyed steels10.1016/j.msea.2007.01.098 ↗
14. Hot flow behavior of boron microalloyed steels10.1016/j.msea.2007.06.067 ↗
15. Determination of the critical conditions for the initiation of dynamic recrystallization in boron microalloyed steels10.1016/j.msea.2011.01.102 ↗
16. Effect of boron precipitation behavior on the hot ductility of boron containing steel10.1007/s11661-010-0211-9 ↗
17. Effect of boron on the hot ductility of 2.25Cr1Mo steel10.1016/S0921-5093(03)00438-6 ↗
18. Effect of thermal cycle and nitrogen content on the hot ductility of boron-bearing steel10.2355/isijinternational.50.839 ↗
19. Hot ductility behavior of a low carbon advanced high strength steel (AHSS) microalloyed with boron10.1016/j.msea.2011.02.040 ↗
20. Investigation of the hot ductility of a high-strength boron steel10.1016/j.msea.2014.04.053 ↗
21. Influence of B on hot ductility of high Al, TWIP steels10.1179/1743284713Y.0000000399 ↗
22. Investigation of hot ductility in Al-killed boron steels10.1016/j.msea.2008.04.026 ↗
23. Deformation induced austenite formation in as-cast 2101 duplex stainless steel and its effect on hot-ductility10.1016/j.msea.2016.02.067 ↗
24. Hot deformation behavior of two C-Mn-Si based and C-Mn-Al based microalloyed high-strength steels: a comparative study10.1016/j.matdes.2013.03.043 ↗
25. Hot ductility behavior of high-Mn austenitic Fe-22Mn-1.5Al-1.5Si-0.45C TWIP steels microalloyed with Ti and V10.1016/j.msea.2014.05.072 ↗
26. Effect of Mg content on the hot ductility of wrought Fe-36Ni alloy with Ti addition10.1016/j.msea.2016.07.070 ↗
27. Necklace formation during dynamic recrystallization: mechanisms and impact on flow behavior10.1016/S1359-6454(97)00233-4 ↗
28. Influence of phosphorous and boron on dynamic recrystallization and microstructures of hot-rolled interstitial free steel10.1016/j.msea.2005.06.040 ↗
29. Effect of boron addition on structure and properties of low carbon bainitic steels10.2355/isijinternational.42.Suppl_S38 ↗
30. DICTRA simulation of holding time dependence of NbC size and experimental study of effect of NbC on austenite grain growth10.1007/s11661-015-2922-4 ↗
31. Dissolution and precipitation kinetics of Nb (C, N) in austenite of a low-carbon Nb-microalloyed steel10.1007/s11661-008-9758-0 ↗
32. Influence of grain size and precipitation on hot ductility of microalloyed steels10.1179/mst.1986.2.11.1099 ↗
33. Hot embrittlement and effect of grain size on hot ductility of martensitic heat-resistant steels10.1016/j.msea.2016.09.072 ↗
34. Importance and role of grain size in free surface cracking prediction of heavy forgings10.1016/j.msea.2014.12.022 ↗