Mechanical properties and fracture behaviour of ODS steel friction stir welds at variable temperatures
Source abstract
Abstract
We have assessed the microstructure and the temperature-dependent mechanical behaviour of five bead-on-plate friction stir welds of Oxide Dispersion Strengthened (ODS) steel, produced using systematic changes to the tool rotation and traverse speed. Friction stir welding can potentially retain the fine dispersion of nanoparticles, and therefore also the high-temperature strength and radiation damage resistance of these materials. Tensile testing was carried out on the MA956 base material at a range of temperatures, from room temperature up to 750°C. The mechanical properties of the welds were investigated via tensile testing at room temperature and at 500°C, together with micro-hardness testing. The welds exhibited similar strength and ductility to the base material at both testing temperatures as welding caused a partial loss of particle strengthening, alongside an increase in grain boundary strengthening due to a greatly refined grain size in the stir zones. The micro-hardness data revealed a trend of increasing hardness with increasing tool traverse speed or decreasing rotation speed. This was attributed to the smaller grain size and lower nanoparticle number density in the welds created with these parameters. At 500°C, the yield stress and ultimate tensile stress of the base material and the welds decreased, due to a progressive reduction in both the Orowan-type particle strengthening and the grain boundary strengthening.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Fusion materials and technologies · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Structural materials challenges for advanced reactor systems10.1016/j.jnucmat.2008.11.026 ↗
2. Oxide dispersion strengthened ferritic steels: a basic research joint program in France10.1016/j.jnucmat.2014.08.059 ↗
3. Critical assessment 12: prospects for reduced activation steel for fusion plant10.1179/1743284714Y.0000000732 ↗
4. Atomic structure of nanoclusters in oxide-dispersion-strengthened steels10.1038/nmat3150 ↗
5. The crystal structure, orientation relationships and interfaces of the nanoscale oxides in nanostructured ferritic alloys10.1016/j.actamat.2016.03.031 ↗
6. Recent developments in irradiation-resistant steels10.1146/annurev.matsci.38.060407.130315 ↗
7. Modeling of structural hardening in oxide dispersion-strengthened (ODS) ferritic alloys10.1007/s10853-015-9566-z ↗
8. Friction stir welding and processing10.1016/j.mser.2005.07.001 ↗
9. Grain size and particle dispersion effects on the tensile behavior of friction stir welded MA956 oxide dispersion strengthened steel from low to elevated temperatures10.1016/j.msea.2013.09.092 ↗
10. Effects of tool rotation speed on the mechanical properties and microstructure of friction stir welded ODS steel10.1016/j.msea.2013.12.022 ↗
11. Microstructure and mechanical properties of friction stir welded oxide dispersion strengthened alloy10.1016/j.jnucmat.2012.08.001 ↗
12. Effect of friction stir welding and post-weld heat treatment on a nanostructured ferritic alloy10.1016/j.jnucmat.2015.11.061 ↗
13. Recent advances in friction-stir welding – process, weldment structure and properties10.1016/j.pmatsci.2008.05.001 ↗
14. Mishra · 2014
15. Development of oxide dispersion strengthened steels for high temperature nuclear structural applications
16. Engineering Data Sheet for Incoloy MA956, Special Metals Corporation, 2004.
17. Whittenberger · Metall. Trans. A · 1981 · 12A · 84510.1007/BF02648349 ↗
18. Klug · Metall. Mater. Trans. A · 1996 · 27 · 194510.1007/BF02651944 ↗
19. Impact of Friction Stir Welding on the microstructure of ODS steel10.1016/j.jnucmat.2016.12.033 ↗
20. Residual stress distribution in friction stir welded ODS steel measured by neutron diffraction10.1016/j.jmatprotec.2017.03.013 ↗
21. Friction stir welding of PM2000 ODS alloy10.1179/1743284714Y.0000000553 ↗
22. Martin · 1980
23. Temperature dependence of the strength of fine- and ultrafine-grained materials10.1016/j.actamat.2010.10.062 ↗
24. Temperature dependence of strengthening mechanisms in the nanostructured ferritic alloy 14YWT: part II—mechanistic models and predictions10.1016/j.msea.2012.08.041 ↗
25. Direct versus indirect dispersion hardening,
26. The kinetics of dislocation climb over hard particles – II. Effects of an attractive particle-dislocation interaction10.1016/0001-6160(88)90159-9 ↗
27. Dislocation/particle interactions in an oxide dispersion strengthened alloy10.1016/S0036-9748(88)80230-8 ↗
28. Dislocation dynamics in the oxide dispersion strengthened alloy INCOLOY MA95610.1016/S0921-5093(99)00471-2 ↗
29. Dislocation-particle interaction at elevated temperatures10.1007/s11837-009-0028-4 ↗
30. Hall-Petch breakdown at elevated temperatures10.2320/matertrans.MA201309 ↗
31. Incoloy alloy MA956. Strain rate and temperature effects on the microstructure and ductility
32. Creep fracture processes of oxide dispersion strengthened mechanically alloyed inconel alloy ma75410.1007/BF02648399 ↗