journal article·2017-04Open access

Impact of annealing treatments on the softening and work hardening behaviour of Jethete M152 alloy for subsequent cold forming processes

Marcos Pérez

Abstract

Cold forming processes present advantages to produce components with tight tolerances to the final (net) shape, eliminating significant production costs. These processes requires forming parts in a soft condition, with high ductility and formability. Jethete M152 alloy is a cold formable 13-Cr% martensitic stainless steel used in the aerospace industry. However, the inherent high strength of this material presents challenges in terms of the high loads and contact and friction stresses developed during cold forming processes. The main purpose of this work was to explore the impact of different types of annealing treatments (subcritical, full and isothermal treatments) on the softening and work hardening behavior of this alloy. Microstructural and mechanical testing analysis were conducted. The results indicate that only subcritical annealing treatments (T < Ar1) were successful by reducing the strength and hardness levels. However no significant effect on both work hardening behavior and uniform elongation was found. Due to the high hardenability of this alloy, those softening treatments which require the austenization of the material were translated into the formation of freshly (as-quenched) martensite, resulting into an increase of strength, loss in ductility properties and a significant change in the work hardening behaviour. Despite of the large differences in strength properties and work hardening behaviour across all the softening treatments analyzed, no significant microstructural differences were found. These results indicate that such differences are associated mainly to both dislocation density and the substructure developed during tempering/annealing at high temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. M.A.Alvarado-Meza, E.Garcıa-Sanchez, O.Covarrubias-Alvarado, A.Salinas-Rodriguez, M.P.Guerrero-Mata and R.Cola, Effect of the high-temperature deformation on the Ms temperature in a low C martensitic stainless steel, J. Mater. Eng. and Perform. Vol. 22(2) 345-350. (doi: 10.1007/s11665-012-0258-4).10.1007/s11665-012-0258-4 ↗
2. Martensitic structures
3. Strengthening mechanisms of creep resistant tempered martensitic steel10.2355/isijinternational.41.641 ↗
4. W.Yan, W.Wang, Y.Shan, K.Yang and W.Sha, 9-12Cr Heat Resistant Steels, Springer [Eds.] (2015).10.1007/978-3-319-14839-7 ↗
5. Heat treating of martensitic stainless steels
6. A.Nasery Isfahanya, H.Saghafiana and G.Borhanib, The effect of heat treatment on mechanical properties and corrosion behavior of AISI420 martensitic stainless steel, J. Alloys & Comps. Vol. 509(9), pp. 3931–3936. (http://dx.doi.org/10.1016/j.jallcom.2010.12.174).
7. Investigation of microstructure and properties of a Ni-Mo martensitic stainless steel10.1016/j.matdes.2006.11.020 ↗
8. Control of M23C6 carbides in 0.45C-13Cr4513Cr martensitic stainless steel by means of three representative heat treatment parameter10.1016/S0921-5093(97)00491-7 ↗
9. Influence of the heat treatment on the corrosion resistance of the martensitic stainless steel type AISI 42010.1023/A:1025179128333 ↗
10. A review of strain analysis using Electron Backscatter Diffraction10.1017/S1431927611000055 ↗
11. Effect of strain hardening and fine structure on strength and toughness of tempered martensite in carbon steels
12. Bulk workability of metals, G.E. Dieter, H.A.Kuhn and S.L.Semiatin (Eds.), Handbook of Workability and Process Design, (2003), 22-34.
13. Effect of ferrite volume fraction on work hardening behaviour of high bainite dual phase (DP) steels10.1016/j.msea.2007.05.051 ↗
14. Study on microstructures and work hardening behaviour of ferrite-martensite dual-phase steels with high-content martensite10.1590/S1516-14392012005000118 ↗
15. Martensite in steel: strength and structure10.1016/S0921-5093(99)00288-9 ↗
16. The tempering of Fe-C lath martensite10.1007/BF02647041 ↗
17. Transformation of dislocation martensite in tempering secondary-hardening steel10.1007/BF02469875 ↗
18. Tempering-induced structural changes in steel 10Kh9K3V1M1FBR and their effect on the mechanical properties10.1007/s11041-010-9240-7 ↗