High strength and damping capacity of LLZNO/Al composites fabricated by accumulative roll bonding
Source abstract
Abstract
Abstract In order to fabricate high damping/strength metal matrix composites, hard ceramic particulates Li 6.75 La 3 Zr 1.75 Nb 0.25 O 12 (LLZNO) reinforced Al composites were prepared by accumulative roll bonding (ARB) method with intermittent heat treatments. LLZNO particles did not react with Al and were uniformly dispersed in Al-matrix after 10 ARB cycles. With increasing ARB cycles, the ultimate tensile strength of the LLZNO/Al composites increased and reached 132 MPa after 10 ARB cycles, which was 2.5 times that of the pure Al, while the total elongation of LLZNO/Al composites increased from 5% after 1 cycle to 10% after 10 cycles. The maximum damping capacity as high as 0.009 was achieved after 10 ARB cycles in the 10 wt% LLZNO/Al composite at 320 K and 1 Hz, which was 4.5 times that of pure Al. The simultaneous enhancement on damping capacity, tensile strength and ductility of the LLZNO/Al composite around room temperature can be ascribed to the high damping capacity and the dispersion strengthening of the LLZNO phase, as well as the good bonding between the LLZNO particles and Al matrix resulted from the ARB technique.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. A study on the damping capacity of BaTiO3-reinforced Al-matrix composites10.1007/s12034-016-1171-5 ↗
2. Damping behavior of Al/SiCP multilayer composite manufactured by roll bonding10.1016/j.matdes.2012.06.009 ↗
3. Particle reinforced aluminum and magnesium matrix composites10.1179/imr.1994.39.1.1 ↗
4. The properties and microstructure of Al-based composites reinforced with ceramic particles10.1016/S0921-5093(97)00830-7 ↗
5. Aluminum matrix composites: challenges and opportunities10.1007/BF02717141 ↗
6. Development of aluminum alloy composites for engineering applications
7. Evaluation of microstructure and mechanical properties of Al/Al2O3/SiC hybrid composite fabricated by accumulative roll bonding process10.1016/j.matdes.2013.06.064 ↗
8. Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC10.1016/j.jmatprotec.2007.06.082 ↗
9. Fabrication of nanostructure Al/SiCp composite by accumulative roll-bonding (ARB) process10.1016/j.jallcom.2009.12.026 ↗
10. Effect of SiC and graphite particulates on the damping behavior of metal matrix composites10.1016/0956-7151(94)90495-2 ↗
11. Damping capacity of in situ TiB2 particulates reinforced aluminum composites with Ti addition10.1016/j.matdes.2005.07.015 ↗
12. Damping capacity of BaTiO3/Al composites fabricated by hot extrusion10.1016/S1003-6326(11)61493-3 ↗
13. Design, fabrication, and properties of high damping metal matrix composites – a review10.3390/ma2030958 ↗
14. Internal friction peak and damping mechanism in high damping 6061Al/SiCp/Gr hybrid metal matrix composite10.1016/j.jallcom.2003.10.021 ↗
15. Damping properties of Li5La3Ta2O12 particulates reinforced aluminum matrix composites10.1016/j.msea.2009.04.002 ↗
16. Correlation of lithium ionic diffusion with Nb concentration in Li7-xLa3Zr2-xNbxO12 evaluated by an internal friction method10.1088/0256-307X/31/1/016201 ↗
17. Correlation and the mechanism of lithium ion diffusion with the crystal structure of Li7La3Zr2O12 revealed by an internal friction technique10.1039/C3CP55515A ↗
18. Influence of nano-SiCp on the foamability and microstructure of Al/TiH2 foam sheet manufactured by continual annealing and roll-bonding process10.1016/j.matdes.2016.02.106 ↗
19. Novel ultra-high straining process for bulk materials-development of the accumulative roll-bonding (ARB) process10.1016/S1359-6454(98)00365-6 ↗
20. Ultragrain refinement of plain low carbon steel by cold-rolling and annealing of martensite10.1016/S1359-6454(02)00260-4 ↗
21. Bulk texture evolution of Cu-Nb nanolamellar composites during accumulative roll bonding10.1016/j.actamat.2011.11.045 ↗
22. High strength and thermal stability of bulk Cu/Ta nanolamellar multilayers fabricated by cross accumulative roll bonding10.1016/j.actamat.2016.03.034 ↗
23. High-strength and highly-uniform composite produced by anodizing and accumulative roll bonding processes10.1016/j.matdes.2010.04.048 ↗
24. An alternative method for manufacturing Al/B4C/SiC hybrid composite strips by cross accumulative roll bonding (CARB) process10.1016/j.ceramint.2015.07.137 ↗
25. Evaluation of mechanical properties of 1060-Al reinforced with WC particles via warm accumulative roll bonding process10.1016/j.matdes.2012.07.019 ↗
26. Manufacturing of high-strength aluminum/alumina composite by accumulative roll bonding10.1016/j.msea.2010.03.070 ↗
27. Microstructural evolution during accumulative roll-bonding of commercial purity aluminum10.1016/S0921-5093(02)00182-X ↗
28. Application of compocasting and cross accumulative roll bonding processes for manufacturing high-strength, highly uniform and ultra-fine structured Al/SiCp nanocomposite10.1016/j.msea.2013.11.006 ↗
29. Fabrication and characterization of Al/SiCp composites by CAR process10.1016/j.msea.2011.02.037 ↗
30. Fabrication of Al/Al2O3/TiC hybrid composite by anodizing and accumulative roll bonding processes and investigation of its microstructure and mechanical properties10.1016/j.msea.2013.07.075 ↗
31. Microstructures and mechanical properties of 6061 aluminum alloy processed by accumulative roll-bonding10.1016/S0921-5093(01)01416-2 ↗
32. Accumulative roll bonding of aluminum alloys 2219/5086 laminates: microstructural evolution and tensile properties10.1016/j.matdes.2011.11.015 ↗