Effect of pre-fatigue on bending behavior of 2.5D C/C composites
Source abstract
Abstract
This study investigates the influence of pre-fatigue on the bending behavior of needle-punctured 2.5D C/C composites with density between 1.75 and 1.80 g/cm3 prepared by chemical vapor deposition (CVD). Three-point bending pre-fatigue tests are carried out under applied stress/static flexural strength ratio of 60%, 70%, 80% and 90% up to one million cycles. The results show that except for the 60% sample, flexural bending strength of most samples subjected to pre-fatigue is improved significantly compared with that without pre-fatigue. Detailed investigation indicates that the subsequent bending behavior of sample is closely related to both stress level in pre-fatigue and the resultant microstructure. Under low stress level (60–70%) during pre-fatigue, the composite is characterized by a plastic deformation and a slight enhancement of bending strength ascribed to the weakened fiber/matrix interface after fatigue. After pre-fatigue with high stress level (80–90%), the composite demonstrates brittle failure mode but much higher residual strengths during subsequent bending test. The reason for this is ascribed to the variation of the microstructure in fiber/matrix interface during the pre-fatigue, which strongly affects the subsequent mechanical responses.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Metal and Thin Film Mechanics · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Characterizations of C/C composites and wear debris after heavy braking demands10.1016/j.carbon.2008.09.032 ↗
2. Microstructure and elastic properties of individual components of C/C composites10.1016/j.carbon.2009.07.057 ↗
3. Biomechanical and biological properties of the implant material carbon-carbon composite covered with pyrolytic carbon10.1023/A:1008953529111 ↗
4. Response of bone tissue to carbon and its bioactive modification
5. Flexural strength and thermal expansion of 4D carbon/carbon composites after flexural fatigue loading10.1016/S1872-5805(14)60132-3 ↗
6. Mechanical properties, fatigue damage and microstructure of carbon/epoxy laminates depending on fibre volume content10.1016/j.ijfatigue.2014.08.007 ↗
7. The effect of voids on the flexural fatigue performance of unidirectional carbon fibre composites developed for wind turbine applications10.1016/j.ijfatigue.2006.02.033 ↗
8. Effect of stress level on fatigue behavior of 2D C/C composites10.1016/S1003-6326(13)62708-9 ↗
9. Fatigue of C/C composites in bending and in shear modes10.1016/j.carbon.2004.02.022 ↗
10. Effects of fiber-type on the microstructure and mechanical properties of carbon/carbon composites10.1016/S1872-5805(14)60149-9 ↗
11. Tensile fatigue of a laminated carbon–carbon composite at room temperature10.1016/S0008-6223(03)00040-X ↗
12. Flexural fatigue behavior of 2D cross-ply carbon/carbon composites at room temperature10.1016/j.msea.2015.03.029 ↗
13. The effect of applied stress on damage mode of 3D C/C composites under bend-bend fatigue loading10.1007/s11431-007-2025-6 ↗
14. Fatigue behavior of 2D laminate C/C composites at room tempertura10.1016/j.compscitech.2004.09.031 ↗
15. International Standard Organization. IS014879-1:2000, Implants for surgery-Total knee-joint prostheses-Part 1: Determination of endurance properties of knee tibial trays (2000).
16. International Standard Organization. ISO7206-4:2002, Implants for surgery-Partial and total hip jiont prostheses-Partial and total hip joint prostheses-Part 4: Determination of endurance properties of stemmed femoral components (2002).
17. Bending properties and fracture mechanism of C/C composites with high density preform10.1016/S1003-6326(11)60933-3 ↗
18. Internal friction behavior of unidirectional carbon/carbon composites after different fatigue cycles10.1016/j.msea.2014.02.020 ↗
19. Influence of interfaces on mechanical behavior of C/C composites by CLVI processing