Investigating cube-corner indentation hardness and strength relationship under quasi-static and dynamic testing regimes
Source abstract
Abstract
Abstract Several works in the past have attempted to correlate uniaxial strength and indentation hardness for a range of materials. The proportionality constant of an indenter provides the basis to the hardness-strength relation of a material. Sharp indenter tips like the cube-corner have gained popularity in high strain-rate microtesting. Owing to its low semi-angle, the proportionality constant of a cube-corner indenter tip considerably deviates from the ideal Tabor’s hardness-strength relation. A two-dimensional wedge model obtained from the slip-line theory is utilized for computing the theoretical proportionality constant for the cube-corner tip ( ~ 1.81 ). The validity of computed theoretical proportionality factor for the cube-corner tip is assessed under a range of strain hardening conditions by the inclusion of representative strain under the indenter tip. Proportionality constant and representative strain relationship for a cube-corner indenter tip are assessed for both quasi-static and dynamic strain rate regimes using quasi-static and dynamic indentation hardness, along with quasi-static and dynamic stress–strain ( σ − e ) curves.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced Surface Polishing Techniques · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Dynamic indentation hardness and rate sensitivity in metals
2. Non-Destructive Testing
3. “Roll Inspection: Hardness Testing” Union Electrical Steel. Web. 3 Jan. 2015. 〈https://www.uniones.com/technical_manuals〉
4. Structural Components: Mechanical Tests and Behavioral Laws
5. Ashby · 2013 · 134
6. Alavudeen · 2006 · 172
7. Correlation of the hot-hardness with the tensile strength of 304 stainless steel to temperatures of 1200C10.1007/BF02661365 ↗
8. On the prediction of tensile properties from hardness tests10.1007/BF00549163 ↗
9. The determination of tensile properties from hardness measurements for Al-Zn-Mg alloys10.1007/BF01209447 ↗
10. The hardness and strength of metals
11. Wang · 2010 · 98
12. Relationships between hardness, elastic modulus, and the work of indentation10.1063/1.121873 ↗
13. Saito · 2008
14. Meyers · 1994
15. The problem of plasticity with axial symmetry and Brinell's test
16. T.F. Juliano M.R. VanLandingham T. Weerasooriya P. Moy Extracting stress-strain and compressive yield stress information from spherical indentation No. ARL-TR-4229Army Res. Lab. Aberd. Proving Ground MD Weapons Mater. Res. Dir. 2007.
17. The hardness of solids10.1088/0034-6683/1/3/I01 ↗
18. The theory of wedge indentation of ductile materials10.1098/rspa.1947.0009 ↗
19. Plastic flow in glass10.1098/rspa.1964.0114 ↗
20. The theory of indentation and hardness tests10.1088/0959-5309/57/3/301 ↗
21. Computational modeling of the forward and reverse problems in instrumented sharp indentation10.1016/S1359-6454(01)00295-6 ↗
22. Subsurface strain distribution around Vickers hardness indentations in annealed polycrystalline copper10.1016/S1359-6454(98)00010-X ↗
23. Experimental assessment of the representative strains in instrumented sharp indentation10.1016/j.scriptamat.2005.03.030 ↗
24. Depth-sensing instrumented indentation with dual sharp indenters10.1016/S1359-6454(03)00186-1 ↗
25. The determination of yield strength from hardness measurements10.1007/BF02913433 ↗
26. The contributions of David Tabor to the science of indentation hardness10.1557/jmr.2009.0085 ↗
27. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
28. The deformation and indentation of ideal plastic metals
29. Indentation hardness and its measurement: some cautionary comments
30. The deformation and indentation of ideal plastic metals
31. Contact Mechanics
32. 2014
33. Mechanical behaviour of materials
34. Indenter Types
35. Plastic indentation in metals with cones10.1016/0022-5096(65)90018-9 ↗
36. Analysis of ball indentation10.1016/0020-7403(72)90099-9 ↗
37. Role of indenter angle on the plastic deformation underneath a sharp indenter and on representative strains: an experimental and numerical study10.1016/j.actamat.2011.03.058 ↗
38. Characteristics of residual plastic zone under static and dynamic Vickers indentations10.1016/S0043-1648(98)00328-7 ↗