Micro-scale measurements of plastic strain field, and local contributions of slip and twinning in TWIP steels during in situ tensile tests
Source abstract
Abstract
Abstract In-situ tensile tests were carried out on Fe22Mn0.6C and Fe22Mn0.6C3Al (wt%) twinning-induced plasticity (TWIP) steels specimens covered with gold micro-grids. High resolution atomic force microscopy (AFM) and scanning electron microscope (SEM) images were periodically captured. The latter were used for measurements of the plastic strain field, using digital image correlation (DIC). Although no meso-scale localization bands appeared, some areas were deformed three times more than average. Plastic deformation inside the grains was more heterogeneous in Fe22Mn0.6C, but at meso-scale, the degree of strain heterogeneity was not higher, at least up to 12% strain. Plastic deformation started from grain boundaries or annealing twin boundaries in both materials, due to a high elastic anisotropy of the grains. An original method based on DIC was developed to estimate the twin fraction in grains that exhibit a single set of slip/twin bands. Deformation twinning accommodated 60–80% of the plastic strain in some favorably oriented grains, from the onset of plastic flow in Fe22Mn0.6C, but was not observed in the Al-bearing steel until 12% strain. The back stress was important in both materials, but significantly higher in Fe22Mn0.6C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Phase transformations and mechanical properties of Fe-Mn-Si-Al TRIP-steels
2. High strength Fe-Mn-(Al, Si) TRIP/TWIP steels development-properties-application10.1016/S0749-6419(00)00015-2 ↗
3. On the relationship between work hardening and twinning rate in TWIP steels10.1016/j.msea.2012.01.123 ↗
4. Revealing the strain-hardening behavior of twinning-induced plasticity steels: theory, simulations, experiments10.1016/j.actamat.2012.09.064 ↗
5. Dislocation and twin substructure evolution during strain hardening of an Fe-22wt% Mn-0.6wt% C TWIP steel observed by electron channeling contrast imaging10.1016/j.actamat.2011.07.009 ↗
6. On the mechanism of twin formation in Fe-Mn-C TWIP steels10.1016/j.actamat.2009.12.032 ↗
7. Comparison of twinning evolution with work hardening ability in twinning-induced plasticity steel under different strain rates10.1016/j.msea.2014.11.031 ↗
8. Effects of strain, strain rate and temperature on deformation twinning in a Cu–Zn alloy10.1016/j.scriptamat.2008.06.060 ↗
9. Kinetics of FCC deformation twinning and its relationship to stress-strain behavior10.1016/0001-6160(78)90170-0 ↗
10. Strain-hardening of twinning-induced plasticity steels10.1016/j.scriptamat.2011.11.029 ↗
11. Microscopic mechanisms contributing to the synchronous improvement of strength and plasticity (SISP) for TWIP copper alloys
12. On the relationship between the twin internal structure and the work-hardening rate of TWIP steels10.1016/j.scriptamat.2010.07.016 ↗
13. Comparison of work hardening and deformation twinning evolution in Fe–22Mn–0.6C–(1.5Al) twinning-induced plasticity steels10.1016/j.scriptamat.2013.02.060 ↗
14. Fracture behaviour of a Fe–22Mn–0.6C–0.2V austenitic TWIP steel10.1016/j.ijmecsci.2015.07.029 ↗
15. On the origin of dynamic strain aging in twinning-induced plasticity steels10.1016/j.actamat.2011.07.040 ↗
16. In-situ characterization of the damage evolution in thin polyelectrolyte films on TWIP steel substrates10.1016/j.msea.2012.12.086 ↗
17. Effects of Al addition on deformation and fracture mechanisms in two high manganese TWIP steels10.1016/j.msea.2010.12.085 ↗
18. Effects of inclusions on delayed fracture properties of three twinning induced plasticity (TWIP) steels10.1007/s11661-012-1472-2 ↗
19. The mechanism of enhanced resistance to the hydrogen delayed fracture in Al-added Fe-18Mn-0.6C twinning-induced plasticity steels10.1016/j.ijhydene.2012.03.100 ↗
20. Effects of Al on microstructure and tensile properties of C-bearing high Mn TWIP steel10.1016/j.actamat.2011.12.004 ↗
21. Effects of aluminum addition on tensile and cup forming properties of three twinning induced plasticity steels10.1007/s11661-011-1007-2 ↗
22. Characterisation of fine-scale microstructures by electron backscatter diffraction (EBSD)10.1016/j.scriptamat.2004.05.016 ↗
23. Deformation twinning behavior of twinning-induced plasticity steels with different carbon concentrations - Part 1: atomic force microscopy and electron backscatter diffraction measurements10.2355/isijinternational.ISIJINT-2015-069 ↗
24. Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe–Mn–C alloys10.1016/j.msea.2004.01.059 ↗
25. Characterisation of the strain distribution in heterogeneous materials10.1016/j.mecind.2003.09.002 ↗
26. A comparison of two simple methods for measuring cyclic internal and effective stresses10.1016/0025-5416(84)90083-1 ↗
27. Internal stresses and the mechanism of work hardening in twinning-induced plasticity steels10.1016/j.scriptamat.2012.02.019 ↗
28. Effect of carbon content on the mechanical properties and microstructural evolution of Fe–22Mn–C steels10.1016/j.msea.2014.10.042 ↗
29. Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels10.1016/j.scriptamat.2007.10.050 ↗
30. Study of internal stresses in a TWIP steel analyzing transient and permanent softening during reverse shear tests10.1007/s10853-010-4750-7 ↗
31. An alternative model for the strain hardening of FCC alloys that twin, validated for twinning-induced plasticity steel10.1016/j.scriptamat.2008.10.035 ↗
32. Residual stress analysis in deep drawn twinning induced plasticity (TWIP) steels using neutron diffraction method10.1007/s11661-013-2161-5 ↗
33. Elastic properties of fcc Fe–Mn–X (X=Al, Si) alloys studied by theory and experiment10.1016/j.actamat.2011.01.054 ↗
34. Single crystal elastic constants of high-manganese transformation- and twinning-induced plasticity steels determined by a new method utilizing nanoindentation10.1016/j.msea.2013.04.049 ↗
35. Analytical expressions of incompatibility stresses at Σ3<111> twin boundaries and consequences on single-slip promotion parallel to twin plane10.1080/14786435.2014.984787 ↗
36. Small-scale patterning methods for digital image correlation under scanning electron microscopy10.1088/0957-0233/22/12/125501 ↗
37. Plastic Strain mapping with sub-micron resolution using digital image correlation10.1007/s11340-012-9685-2 ↗