journal article·2016-04

Influence of crystallinity on thermo-process ability and mechanical properties in a Au-based bulk metallic glass

S. Cardinal, J.M. Pelletier, M. Eisenbart, U.E. Klotz

Publisher page

Abstract

The present investigation addresses the impact of crystallinity on the mechanical properties: hardness (HV) and toughness (KIC) in an Au49Cu26.9Ag5.5Pd2.3Si16.3 BMG which appears especially attractive for applications in jewelry and watch making industries. Thermal stability is first determined using differential scanning calorimetry (DSC), X-ray diffraction and thermo-mechanical analysis (TMA). Then the conditions (time, temperature) in which crystallization is observed (during annealing above the glass transition temperature) and the kinetics are determined. Results show an increase of hardness proportional to the volume fraction of the crystalline phase (φ) (from about 350 HV up to about 480 HV), and a drastic reduction in fracture toughness from about 20 MPa√m down to 1.5 MPa√m for fully crystalline structure. Finally the conditions required achieving a good compromise between hardness and toughness are established. © 2016 Elsevier B.V.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Phase-change materials and chalcogenides · Material Dynamics and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Metallic glasses as structural materials10.1016/j.scriptamat.2005.09.051 ↗
2. Mechanical behaviour of amorphous alloys10.1016/j.actamat.2007.01.052 ↗
3. Recent developments and application products of bulk metallic glasses10.1016/j.actamat.2010.11.027 ↗
4. The elastic properties, elastic models and elastic perspectives of metallic glasses10.1016/j.pmatsci.2011.07.001 ↗
5. Mechanical properties of metallic glasses10.3390/met3010077 ↗
6. Non-crystalline structure in solidified gold-silicon alloys10.1038/187869b0 ↗
7. Gold-based bulk metallic glass10.1063/1.2008374 ↗
8. Precious bulk metallic galsses for jewellry applications10.1016/j.msea.2006.02.301 ↗
9. New Au-based bulk metallic glassy alloys with ultralow glass transition temperature10.1016/j.scriptamat.2009.06.020 ↗
10. Deformation behavior and indentation size effect in an Au-Ag-Si-Ag-Pd bulk metallic glass at elevated temperatures10.1016/j.intermet.2008.07.018 ↗
11. Investigation of mechanical, corrsoion and optical peoperties of an 18 carat Au-Cu-Si-Ag-Pd bulk metallic glass10.1016/j.intermet.2010.07.021 ↗
12. Thermal analysis, fragility and viscosity of Au-based metallic glasses10.1016/j.jnoncrysol.2010.08.032 ↗
13. Thermoplastic deformation and micro-nano replication of an Au-based bulk metallic glass in its supercooled liquid region10.1016/j.msea.2012.07.017 ↗
14. β relaxation and low temperature aging in a Au-based bulk metallic glass: from elastic to atomic scale structure10.1103/PhysRevB.89.174204 ↗
15. A colorimetric and Microstructural study of the tarnishing of gold-based bulk metallic glasses10.1016/j.corsci.2014.04.024 ↗
16. On the abnormal room temperature tarnishing of an 18karat gold bulk metallic glass alloy10.1016/j.jallcom.2013.11.167 ↗
17. A gold bulk solidifying amorphous alloy for jewellery. Comparison with a palladium-base amorphous alloy10.4028/www.scientific.net/MSF.783-786.1901 ↗
18. Bulk metallic glasses based on precious metals: thermal treatments and mechanical properties10.1016/j.intermet.2015.04.003 ↗
19. The abrasive wear of gold jewelry alloys10.1007/BF03214627 ↗
20. 18carat yellow gold alloys with increased hardness10.1007/BF03215213 ↗
21. Age-hardening by grain interior and grain boundary precipitation in an Au-Ag-Pt-Zn-In alloy for multipurpose dental use10.1007/BF03215001 ↗
22. Hardening and overaging mechanisms in an Au-Ag-Cu-Pd alloy with in additions10.1007/BF03214879 ↗
23. Age-hardening by miscibility limit in a multi-purpose dental gold alloy containing platinum10.1007/BF03214965 ↗
24. Effect of thermo-mechanical tratment on properties improvement and microstructure changes in copper-gold alloy10.1016/j.matdes.2013.06.062 ↗
25. Toughness, extrinsic effects and Poisson's ratio of bulk metalllic glasses10.1016/j.actamat.2012.05.025 ↗
26. Intrinsic plasticity or brittleness of bulk metallic glasses10.1080/09500830500080474 ↗
27. Fracture, fatigue and environmentally-assisted failur of a Zr-based bulk amorphous metal10.1016/S0966-9795(99)00155-7 ↗
28. Effect of crystallinity on the impact toughness of a La-based bulk metallic glass10.1016/S1359-6454(00)00052-5 ↗
29. Toughness of as-cast and partially crystallized composites of a bulk metallic glass10.1016/j.intermet.2009.03.012 ↗
30. Microstructure controlled shear band patterns formation and enhanced plasticity of bulk metallic glasses containing in-situ formed ductile phase dendrite dispersions10.1103/PhysRevLett.84.2901 ↗
31. Insight on the process ability of bulk metallic glasses by thermo-mechanical analysis and dynamic mechanical analysis10.1016/j.jallcom.2014.12.166 ↗
32. Fragility and thermal stability of Pd- and Pt-based bulk glass forming liquids and their correlation with deformability10.1016/j.scriptamat.2006.03.025 ↗
33. Liu · 2005
34. Fracture of bulk metallic glasses : brittleness or plasticity10.1103/PhysRevLett.94.125510 ↗
35. Locating bulk metallic glasses with High fracture toughness: chemical effects and composition optimization10.1016/j.actamat.2010.09.025 ↗
36. On thermo-mechanical properties of Au-Ag-Pd-Cu-Si bulk metallic glass10.1016/j.matchemphys.2009.04.032 ↗
37. Bulk metallic glass with benchmark thermoplastic processability10.1002/adma.200700969 ↗
38. On the formability of bulk metallic glass in its supercooled liquid state10.1016/j.actamat.2007.10.008 ↗
39. Bulk metallic glass: the smaller the better10.1002/adma.201002148 ↗
40. Processing of bulk metallic glass10.1002/adma.200902776 ↗