journal article·2013-05

The effect of reinforcement content and milling time on microstructure and mechanical properties of Al–10Mg/xAl2O3 nanocomposites

J. Safari, G.H. Akbari, M. Delshad Chermahini

Publisher page

Abstract

Abstract The microstructural changes and mechanical properties of Al–10 wt% Mg/ x Al 2 O 3 ( x =0, 5, 10 and 15 wt%) nanocomposites during milling were investigated. The structural evolution of the Al–10Mg/Al 2 O 3 powders during mechanical milling, due to the presence of alumina particles, occurred faster than that of the non-reinforced Al–10Mg powder. For the binary Al–Mg matrix, the acceleration of the grain refinement process (to 25 nm) was observed due to generation of dislocations by the addition of reinforcement particles. For non-reinforced Al–10Mg sample with up to 10 h, microhardness increases to 129 HV due to solid solution hardening and dislocation density as well as the decrease of the crystallite size. The acceleration of the grain refinement process by adding alumina particles leads to increase in microhardness (about 175 HV for 15 wt% Al 2 O 3 ). From 10 to 20 h, slower rate of increasing in microhardness may be attributed to the completion of alloying process, and dynamic and static recovery of powders.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Sherif El-Eskandarani · 2001
2. Chermahinia · J. Alloys Compd. · 2009 · 480 · 16110.1016/j.jallcom.2009.01.088 ↗
3. Al-Aqeeli · Mater. Sci. Eng. A · 2008 · 480 · 39210.1016/j.msea.2007.09.060 ↗
4. Al-Aqeeli · J. Alloys Compd. · 2005 · 400 · 9610.1016/j.jallcom.2005.03.022 ↗
5. Umbrajkar · J. Alloys Compd. · 2005 · 402 · 7010.1016/j.jallcom.2005.03.088 ↗
6. Gubicza · Mater. Sci. Eng. A · 2004 · 372 · 11510.1016/j.msea.2003.12.016 ↗
7. Youssef · Scr. Mater. · 2006 · 54 · 25110.1016/j.scriptamat.2005.09.028 ↗
8. Scudino · J. Alloys Compd. · 2009 · 483 · 210.1016/j.jallcom.2008.07.161 ↗
9. Crivello · Intermetallics · 2007 · 15 · 143210.1016/j.intermet.2007.05.001 ↗
10. Hamana · Mater. Chem. Phys. · 2004 · 84 · 11210.1016/j.matchemphys.2003.11.001 ↗
11. Singh · Intermetallics · 2003 · 11 · 37310.1016/S0966-9795(03)00005-0 ↗
12. Massalski · 1991
13. Fogagnolo · Mater. Sci. Eng. A · 2003 · 355 · 5010.1016/S0921-5093(03)00057-1 ↗
14. Fogagnolo · Mater. Sci. Eng. A · 2006 · 426 · 8510.1016/j.msea.2006.03.074 ↗
15. Prabhu · Mater. Sci. Eng. A · 2006 · 425 · 19210.1016/j.msea.2006.03.066 ↗
16. Fogagnolo · Mater. Sci. Eng. A · 2003 · 342 · 13110.1016/S0921-5093(02)00246-0 ↗
17. Ozdemir · J. Mater. Process Technol. · 2008 · 205 · 11110.1016/j.jmatprotec.2007.11.085 ↗
18. Williamson · Acta Metall. · 1953 · 1 · 2210.1016/0001-6160(53)90006-6 ↗
19. Suryanarayana · 1998
20. Suryanarayana · Prog. Mater. Sci. · 2001 · 46 · 110.1016/S0079-6425(99)00010-9 ↗
21. Safari · J. Alloys Compd. · 2011 · 509 · 941910.1016/j.jallcom.2011.07.061 ↗
22. Safari · Powder Technol. · 2013 · 234 · 710.1016/j.powtec.2012.09.033 ↗
23. Zhao · Surf. Coat. Technol. · 2003 · 168 · 17910.1016/S0257-8972(03)00202-0 ↗
24. Saberi · J. Alloys Compd. · 2009 · 484 · 63710.1016/j.jallcom.2009.05.009 ↗
25. Zhang · Scr. Mater · 2003 · 49 · 112310.1016/j.scriptamat.2003.08.009 ↗
26. Chung · Mater. Sci. Eng. A · 2003 · 356 · 2310.1016/S0921-5093(02)00833-X ↗
27. Chermahinia · J. Alloys Compd. · 2009 · 477 · 4510.1016/j.jallcom.2008.10.163 ↗
28. Baghbaderani · Powder Technol. · 2012 · 230 · 24110.1016/j.powtec.2012.07.039 ↗
29. Chermahinia · J. Alloys Compd. · 2009 · 484 · 5410.1016/j.jallcom.2009.05.055 ↗
30. C.C. Koch, I.A. Ovidko, S. Seal, and S. Veprek, Structural Nanocrystalline Materials: Fundamentals and Applications, Cambridge University Press, New York, 2007, p. 141.10.1017/CBO9780511618840 ↗
31. Mazilkin · Acta Mater. · 2006 · 54 · 393310.1016/j.actamat.2006.04.025 ↗