In situ synthesized TiC/Ti5Si3 nanocomposites by high-energy mechanical alloying: Microstructural development and its mechanism
Source abstract
Abstract
Abstract In situ synthesis of TiC/Ti 5 Si 3 nanocomposites powder was performed by high-energy ball milling of a Ti–SiC powder mixture having an 8:3 molar ratio. The 25 h milled final product was featured by the nanocrystalline Ti 5 Si 3 matrix reinforced with the uniformly dispersed TiC nanoparticles. The crystalline size of the in situ formed Ti 5 Si 3 and TiC constituents was ∼14 and ∼8 nm, respectively. The evolutions of constitution phases and particle structures of the milled powders were studied and the predominant mechanisms behind the microstructural developments were elucidated. It showed that the disappearance of X-ray diffraction peaks of SiC in the milling system was significantly behind the disappearance of Ti peaks. The SiC constituent decomposed gradually within 25 h of milling, while the Ti constituent reacted speedily after a relatively short time of 10 h. The structures of the milled TiC/Ti 5 Si 3 nanocomposites powders experienced a successive change: pre-refining – coarsening – re-refining on increasing the applied milling time, due to the competitive action between the mechanisms of cold-welding and fracturing. The plastic deformation and cold-welding occurred at the initial milling stage where the ductile Ti element existed. Only fracturing of the particles was operative in a long-term milling system (≥15 h), due to the formation of brittle intermetallic compound Ti 5 Si 3 and ceramic compound TiC. The refinement of the milled powder particles was based on a layered fracturing mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Zhang · Mater. Sci. Eng. A · 2009 · 526 · 18510.1016/j.msea.2009.07.024 ↗
2. Cheon · Mater. Sci. Eng. A · 2007 · 467 · 8910.1016/j.msea.2007.02.076 ↗
3. Yeh · J. Alloys Compd. · 2007 · 432 · 9010.1016/j.jallcom.2006.05.131 ↗
4. Mitra · Metall. Mater. Trans. A · 1998 · 29 · 162910.1007/s11661-998-0086-1 ↗
5. Wang · J. Mater. Res. · 2004 · 19 · 300410.1557/JMR.2004.0365 ↗
6. Shon · Scr. Mater. · 2007 · 56 · 66510.1016/j.scriptamat.2006.12.042 ↗
7. Li · J. Eur. Ceram. Soc. · 2002 · 22 · 55110.1016/S0955-2219(01)00304-1 ↗
8. Udhayabanu · Intermetallics · 2010 · 18 · 35310.1016/j.intermet.2009.08.006 ↗
9. Karimzadeh · Mater. Sci. Eng. A · 2008 · 486 · 4510.1016/j.msea.2007.08.059 ↗
10. Tjong · Adv. Eng. Mater. · 2007 · 9 · 63910.1002/adem.200700106 ↗
11. Zakeri · Mater. Sci. Eng. A · 2006 · 430 · 18510.1016/j.msea.2006.05.112 ↗
12. Wang · J. Inorg. Mater. · 2004 · 19 · 1436
13. Suryanarayana · Prog. Mater. Sci. · 2001 · 46 · 110.1016/S0079-6425(99)00010-9 ↗
14. Suryanarayana · Rev. Adv. Mater. Sci. · 2008 · 18 · 203
15. Gu · J. Phys. D: Appl. Phys. · 2010 · 43 · 13540210.1088/0022-3727/43/13/135402 ↗
16. Hosseini Monazzah · Mater. Sci. Eng. A · 2010 · 527 · 256710.1016/j.msea.2010.01.060 ↗
17. Mostaan · J. Alloys Compd. · 2010 · 493 · 60910.1016/j.jallcom.2009.12.165 ↗
18. Srinivasarao · Mater. Sci. Eng. A · 2009 · 518 · 10010.1016/j.msea.2009.04.032 ↗
19. Zakeri · J. Alloys Compd. · 2010 · 492 · 22610.1016/j.jallcom.2009.12.020 ↗
20. Suryanarayana · Mater. Sci. Eng. A · 2008 · 479 · 2310.1016/j.msea.2007.07.021 ↗
21. Al-Aqeeli · Mater. Sci. Eng. A · 2008 · 480 · 39210.1016/j.msea.2007.09.060 ↗
22. Forouzanmehr · J. Alloys Compd. · 2009 · 478 · 25710.1016/j.jallcom.2008.12.047 ↗
23. Arami · J. Alloys Compd. · 2008 · 465 · 15110.1016/j.jallcom.2007.10.099 ↗
24. Asgharzadeh · Mater. Sci. Eng. A · 2010 · 527 · 489710.1016/j.msea.2010.04.031 ↗
25. Nayak · Mater. Sci. Eng. A · 2010 · 527 · 237010.1016/j.msea.2009.12.044 ↗
26. Rafiei · J. Alloys Compd. · 2009 · 488 · 14410.1016/j.jallcom.2009.09.007 ↗
27. Barin · 1993
28. Munir · Am. Ceram. Soc. Bull. · 1988 · 67 · 342