journal article·2013-08

On the condition assessment of cast iron trunk main: The effect of microstructure and in-service graphitisation on mechanical properties in flexure

D.A. Jesson, H. Mohebbi, J. Farrow, M.J. Mulheron, P.A. Smith

Publisher page

Abstract

The mechanical properties of cast iron used for trunk mains in the water industry have been studied. Specimens have been sourced from nine different pipes, which had been in service for up to 150 years before failure. The bulk microstructures of each cast iron have been analysed with regard to the graphite flake morphology and size. The stress strain behaviours in tension and compression have been derived from specimens loaded in flexure. Flexural strength data have been obtained for 30 specimens from each pipe (three batches of 10 from different locations along the length and around the circumference of the pipe) and these data have been analysed using Weibull methods. The depth of graphitisation visible on the fracture surface of each sample has been measured. It is shown that the strength of the cast iron samples decreases with increasing depth of graphitisation. When the layer of graphitised material is of reasonably uniform thickness, the strength reduction is modest, but where the section loss is more local, the strength reduction is more significant for some samples there is a reduction in strength of more than 50% when the depth of graphitisation exceeds 4 mm. Simple strength-of-materials and fracture mechanics approaches are shown to provide reasonable bounds for the data. (C) 2013 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Rock Mechanics and Modeling · Fatigue and fracture mechanics · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Rajani · Can. J. Civ. Eng. · 2000 · 27 · 125910.1139/l00-073 ↗
2. Atkinson · Urban Water · 2003 · 4 · 26310.1016/S1462-0758(02)00004-3 ↗
3. Belmonte · Fatigue Fract. Eng. Mater. Struct. · 2007 · 30 · 96410.1111/j.1460-2695.2007.01167.x ↗
4. Conlin, R.M. Baker, T.J., Application of Fracture Mechanics to the Failure Behaviour of Buried Cast Iron Mains, in Transport Research Laboratory Contract Report no. 266, (1991)
5. Makar · J. Mater. Civ. Eng. · 2000 · 12 · 24510.1061/(ASCE)0899-1561(2000)12:3(245) ↗
6. Yamamoto · Corros. Eng. · 1983 · 32 · 15710.3323/jcorr1974.32.3_157 ↗
7. Belmonte · Fatigue Fract. Eng. Mater. Struct. · 2008 · 31 · 37010.1111/j.1460-2695.2008.01233.x ↗
8. Mohebbi · Mater. Sci. Eng., A—Struct. Mater. Prop. Microstruct. Process. · 2010 · 527 · 591510.1016/j.msea.2010.05.071 ↗
9. Trethaway · 1995
10. ASM · 1990 · Vol. 1
11. Laws · J. Mater. Sci. · 1981 · 16 · 129910.1007/BF01033845 ↗
12. Yokoyama · J. Test. Eval. · 1988 · 16 · 19810.1520/JTE11162J ↗
13. Crocombe · J. Adhes. · 1993 · 42 · 20910.1080/00218469308044648 ↗
15. Weibull · J. Appl. Mech.-Trans. Asme · 1951 · 18 · 29310.1115/1.4010337 ↗
16. Walton · 1981
17. Boresi · 1993
18. Ashby · 1996 · vol. 1