Effect of vanadium substitution on strength properties of Fe3Al-based alloys
Source abstract
Abstract
Abstract The mechanical properties of the pseudobinary (Fe 1− x V x ) 3 Al alloys have been investigated as a function of the V composition with attention to an increase in the D0 3 –B2 transformation temperature, T c . A slight substitution of V to Fe 3 Al induces a sharp decrease in the room-temperature yield stress. As the temperature is raised above 600 K, the yield stress increases and exhibits a peak at around 1000 and 1180 K for x =0.10 and 0.20, respectively. Thus, the yield stress peak can shift to higher temperatures with increasing T c by the V substitution. It is concluded that the peak temperature varies with the increase in T c , which supports a direct correlation between the loss of D0 3 order and the anomalous increase in yield stress.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Hanada · Scr. Metall. · 1981 · 15 · 134510.1016/0036-9748(81)90095-8 ↗
2. Schröer · Z. Metallkd. · 1993 · 84 · 294
3. Brinck · Mater. Sci. Eng. A · 1997 · 234-236 · 41810.1016/S0921-5093(97)00169-X ↗
4. Král · Acta Mater. · 1997 · 45 · 67510.1016/S1359-6454(96)00181-4 ↗
5. Stoloff · Acta Metall. · 1964 · 12 · 47310.1016/0001-6160(64)90019-7 ↗
6. Morris · Phil. Mag. A · 1995 · 71 · 44110.1080/01418619508244368 ↗
7. R.S. Diehm, D.E. Mikkola, in: N.S. Stoloff, C.C. Koch, C.T. Liu, O. Izumi (Eds.), High-Temperature Ordered Intermetallic Alloys II, Mater. Res. Soc. Symp. Proc. vol. 81, MRS, Pittsburgh, 1987, p. 329.10.1557/PROC-81-3 ↗
8. McKamey · Metall. Trans. · 1989 · 20A · 75110.1007/BF02667592 ↗
9. M.G. Mendiratta, H.A. Lipsitt, in: C.C. Koch, C.T. Liu, N.S. Stoloff (Eds.), High-Temperature Ordered Intermetallic Alloys, Mater. Res. Soc. Symp. Proc. vol. 39, MRS, Pittsburgh, 1985, p. 155.
10. Fortnum · Mater. Sci. Eng. · 1987 · 91 · 22310.1016/0025-5416(87)90301-6 ↗
11. Anthony · Acta Metall. Mater. · 1995 · 43 · 388510.1016/0956-7151(95)90171-X ↗
12. Nishino · Scr. Mater. · 1997 · 36 · 46110.1016/S1359-6462(96)00395-8 ↗
13. Nishino · Mater. Sci. Eng. A · 1997 · 234-236 · 27110.1016/S0921-5093(97)00191-3 ↗
14. Nishino · Phil. Mag. Lett. · 1998 · 78 · 9710.1080/095008398178075 ↗
15. Kato · J. Jpn. Inst. Metals · 1998 · 62 · 66910.2320/jinstmet1952.62.7_669 ↗
16. Botton · Intermetallics · 2000 · 8 · 120910.1016/S0966-9795(00)00043-1 ↗
17. Nishino · Mater. Sci. Eng. A · 1998 · 258 · 5010.1016/S0921-5093(98)00916-2 ↗
18. Guedou · Scr. Metall. · 1978 · 12 · 92710.1016/0036-9748(78)90183-7 ↗
19. Kubin · Phil. Mag. A · 1982 · 46 · 35710.1080/01418618208239564 ↗
20. Brinck · Scr. Mater. · 1997 · 37 · 56910.1016/S1359-6462(97)00160-7 ↗
21. Langmaack · Phil. Mag. A · 1999 · 79 · 235910.1080/01418619908214289 ↗
22. Leamy · Phys. Stat. Sol. · 1969 · 34 · 76510.1002/pssb.19690340240 ↗
23. Engelke · Scr. Metall. Mater. · 1995 · 33 · 110910.1016/0956-716X(95)00339-W ↗
24. Schmatz · Acta Metall. · 1968 · 16 · 20710.1016/0001-6160(68)90116-8 ↗
25. Morgand · Acta Metall. · 1968 · 16 · 86710.1016/0001-6160(68)90107-7 ↗
26. Brinck · Mater. Sci. Eng. A · 1998 · 258 · 3210.1016/S0921-5093(98)00913-7 ↗
27. Rösner · Mater. Sci. Eng. A · 1996 · 216 · 16910.1016/0921-5093(96)10411-1 ↗
28. Rudman · Acta Metall. · 1960 · 8 · 32110.1016/0001-6160(60)90117-6 ↗
29. Morris · Mater. Sci. Eng. A · 1997 · 239-240 · 2310.1016/S0921-5093(97)00557-1 ↗