Experimental size ratio and compositional effects on the packing and hot isostatic pressing of spherical powders
Source abstract
Abstract
An experimental method was devised to increase the “packing density” of random spherical powder packings by agitation with an applied compressive force. Maximum random packing densities of both monosize and bimodal-size powder packings of various size ratios and volume fractions are compated to the as-received gas-atmoized SS316L powder. Since the presence of a compressive load will tend to restrict the opening of interparticle passages through the powder pack, uniform mixing of the powders beforehand is important for achieving optimum packing. At the same time, however, macroscopic size segregation of mixer-mill-premixed powder packins was found not to be significant using this technique. Densities of optimized bimodal-size powder packings far exceed those of non-optimized packings and the as-received (continuously distributed) powder. This enhancement is also retained during subsequent hot isostatic pressing.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Powder Metallurgy Techniques and Materials · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Mechanical packing of spherical particles10.1111/j.1151-2916.1961.tb13716.x ↗
2. Cumberland · 1987
3. Comments on some types of random packing
4. German · 1989
5. 1990
6. Numerical analysis of tapping behavior of ceramic powders
7. On the random packing of spheres10.1063/1.1725176 ↗
8. Significance of the properties of materials in the packing of real, spherical particles10.1088/0508-3443/12/4/309 ↗
9. The density of random close packing of spheres10.1088/0022-3727/2/6/311 ↗
10. Dense random packing of binary mixtures of spheres10.1038/207835a0 ↗
11. Random loose porosity of packed beds
12. Structural properties of packed beds—a review10.1002/cjce.5450470206 ↗
13. Packing of equal spheres10.1038/256521c0 ↗
14. Particle deformation and sliding during compaction of spherical powders: a study by quantitative metallography10.1179/pom.1978.21.4.179 ↗
15. Coordination of randomly packed spheres10.1038/188910a0 ↗
16. Simulated random packing of equal spheres10.1002/cjce.5450510414 ↗
17. Fundamental principles of industrial filtration
18. Computer simulation of isotropic, homogeneous, dense random packing of equal spheres10.1016/0032-5910(81)80003-4 ↗
19. Structure simulation of transition-metal-metalloid glasses10.1063/1.323301 ↗
20. Hard spheres simulation of the size effect in liquid and amorphous metallic alloys10.1016/0001-6160(80)90019-X ↗
21. A theoretical analysis of random packing densities of mono-sized spheres in two and three dimensions10.1016/0036-9748(84)90328-4 ↗
22. Statistical geometrical approach to random packing density of equal spheres10.1038/252202a0 ↗
23. Computation of dense random packings of hard spheres10.1063/1.1677488 ↗
24. Random packings and the structure of simple liquids I. The geometry of random close packing
25. Modeling of the densification rates of monosized and bimodal-sized particle systems during hot isostatic pressing (HIP)10.1016/0001-6160(89)90131-4 ↗
26. The influence of an increasing particle co-ordination on the densification of spherical powders10.1016/0001-6160(82)90028-1 ↗
27. The relations between specific volume, voids, and size composition in systems of broken solids of mixed sizes
28. Packing of spheres and its effect on the viscosity of suspensions
29. Powders—experimental studies10.1111/j.1151-2916.1978.tb09216.x ↗
30. Powders—experimental studies10.1111/j.1151-2916.1978.tb09329.x ↗
31. Packing density of fiber/powder blends
32. The packing of particles10.1111/j.1151-2916.1930.tb16222.x ↗
33. Packing of mixtures of hard spheres10.1038/187930a0 ↗
34. Packing of binary mixtures of spheres and irregular particles10.1038/195033a0 ↗
35. An empirical method of estimating the void fraction in mixtures of uniform particles of different size10.1016/0032-5910(79)87011-4 ↗
36. Random particle packing by reduced dimension algorithms10.1063/1.345785 ↗
37. Random loose packing of binary mixtures of spheres10.1038/196885a0 ↗
38. Practical applications of hot isostatic pressing diagrams: four case studies10.1007/BF02651618 ↗