Effect of AL3Ti diffusion aluminide coating on tensile properties of a near α-Ti alloy
Source abstract
Abstract
Abstract The tensile properties of a near α Ti-alloy have been evaluated in both uncoated and diffusion aluminide (Al 3 Ti) coated conditions at room temperature (RT) and 600 °C. The effect of coating thickness on the tensile properties has been examined. The YS and UTS of the alloy at RT reduced marginally because of the presence of the coating, with the extent of reduction increasing with the increase of coating thickness. Such a trend in alloy strength was also observed at 600 °C. The RT ductility of the alloy remained nearly unaffected by the presence of the coating. However, an increase in ductility was observed in the coated alloy at 600 °C. The above effect of Al 3 Ti coating on tensile properties of the present near α Ti-alloy has been explained in terms of the influence of the through-thickness cracking in the coating during tensile testing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Leyens · 2003 · 207
2. Jia · J. Mater. Sci. · 2010
3. Benien · Mater. Sci. Eng. A · 1999 · 139 · 12610.1016/0921-5093(91)90606-N ↗
4. MacMordie · Surf. Coat. Technol. · 1991 · 49 · 1810.1016/0257-8972(91)90025-R ↗
5. Takie · 1992
6. Karc · 1991
7. Cockeram · Metall. Mater. Trans. A · 1995 · 26A · 77710.1007/BF02649076 ↗
8. Cockeram · Oxid. Met. · 1996 · 45 · 42710.1007/BF01046846 ↗
9. Nicholls · 1996
10. Dewald · 1996
11. Leyens · Mater. Sci. Eng. A · 1997 · 239–240 · 68010.1016/S0921-5093(97)00652-7 ↗
12. C. Leyens, M. Peters, W.A. Kaysser, Titanium’99: Science and Technology, CRISM “Prometey”, vol. II, 2000, p. 866.
13. Alam · Corros. Sci. · 2009 · 51 · 140510.1016/j.corsci.2009.03.027 ↗
14. Gurrappa · Mater. Sci. Technol. · 2001 · 17 · 58110.1179/026708301101510249 ↗
15. Dewald · 1996 · 255
16. Nicholls · 1996 · 199
17. Kung · Oxid. Met. · 1990 · 34 · 21710.1007/BF00665016 ↗
18. Strang · 1982 · 469
19. Schneider · Thin Solid Films · 1983 · 107 · 39510.1016/0040-6090(83)90302-4 ↗
20. Veys · Mater. Sci. Eng. · 1987 · 88 · 25310.1016/0025-5416(87)90093-0 ↗
21. Neal · 1988 · 253
22. Zhang · J. Mater. Sci. Technol. · 2009 · 25 · 454
23. Standard Test Methods for Tension Testing of Metallic Materials, ASTM International, PA, pp. 1–25, 2008 (source: www.astm.org) (accessed 7.08.08).
24. Das · Mater. Sci. Eng. A · 2004 · 367 · 22510.1016/j.msea.2003.10.196 ↗
25. Trivedi · Intermetallics · 2005 · 13 · 112210.1016/j.intermet.2005.02.006 ↗
26. Yamaguchi · 1995 · vol. 2
27. Donachie · 1989
28. Srinadh · Bull. Mater. Sci. · 2007 · 30 · 59510.1007/s12034-007-0094-6 ↗
29. Madson · Mater. Sci. Eng. A · 1994 · 177 · 6310.1016/0921-5093(94)90478-2 ↗
30. Woodfield · Acta Metall. · 1988 · 36 · 50710.1016/0001-6160(88)90082-X ↗
31. Singh · Metall. Trans. A · 1996 · 27 · 116710.1007/BF02649855 ↗
32. Singh · Mater. Sci. Eng. A · 2008 · 485 · 13010.1016/j.msea.2007.07.064 ↗
33. Deka · Metall. Mater. Trans. A · 2006 · 37A · 137110.1007/s11661-006-0082-2 ↗
34. Edington · 1985
35. Itoh · 1996 · vol. I · 581
36. Yamaguchi · Prog. Mater. Sci. · 1990 · 34 · 110.1016/0079-6425(90)90002-Q ↗
37. Noda · Int. J. Fatigue · 1995 · 17 · 16310.1016/0142-1123(95)98937-X ↗
38. Leyens · 1995 · 1935