Laser surfacing of brass with Ni–Cr–Al–Mo–Fe using various laser processing parameters
Source abstract
Abstract
Abstract Brass (Cu–38%Zn) specimens were laser surface modified with Ni–Cr–Al–Mo–Fe (Ni–10%Cr–7%Al–5%Mo–5%Fe–1%B) using a 2 kW CW Nd:YAG laser. Successful laser surfacing was achieved with a power density around 70 W mm −2 , a scanning speed in the range 15–35 mm s −1 , and a 50% overlap of adjacent tracks. The hardness of the alloyed layer increased as the dilution ratio decreased. The cavitation erosion resistance, defined as the reciprocal of the mean erosion rate, of the modified specimens in 3.5 wt.% NaCl solution (pH 6) at 23 °C was improved by a factor in the range 2.47–4.60 compared with that of brass, and correlated well with the hardness. The improvement in the cavitation erosion resistance was attributed to the formation of hard boride phases in a ductile Ni-rich matrix. On the other hand, there was no significant improvement in the corrosion resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metallurgy and Material Science · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Karimi · Int. Metals Rev. · 1986 · 31 · 110.1179/095066086790324212 ↗
2. Draper · High Temp. Mater. Process · 1984 · 6 · 213
3. Nakata · Trans. Jpn. Welding Res. Inst. · 1996 · 25 · 37
4. Dehm · Wear · 1999 · 225–229 · 1810.1016/S0043-1648(98)00347-0 ↗
5. Z. Liu, K.G. Watkins, W.M. Steen, N. Pirch, A. Gasser, P.G. Hatherley, Proceedings of ICALEO'98, Orlando, FL, Vol. 85 (1), 1998, pp. 94–103.
6. ASTM 032-92, Annual Book of ASTM Standards, Vol. 03.02, ASTM, Philadelphia, PA, 1994.
7. ASTM 05-94, Annual Book of ASTM Standards, Vol. 03.02, ASTM, Philadelphia, PA, 1994.
8. S.D. De la Torre, D. Oleszak, A. Kakitsuji, K. Miyamoto, H. Miyamoto, R. Martinez-S., F. Almeraya-C, A. Martinez-V., D. Rios-J., Mater. Sci. Eng. A276 (2000) 226–235.10.1016/S0921-5093(99)00156-2 ↗
9. J.Z. Lichtman, E.R. Weingram. In: J.W. Holl, G.M. Wood (Eds.), Symposium on Cavitatation: Research, Facilities and Technology, American Society of Mechanical Engineers, New York, 1964, p. 185.
10. A. Laird, J.M. Hobbs, National Engineering Laboratory Report No. 496, East Kilbride, 1971.