journal article·2015-07Open access

Modeling the effect of laser heating on the strength and failure of 7075-T6 aluminum

J.N. Florando, J.D. Margraf, J.F. Reus, A.T. Anderson, R.C. McCallen, M.M. LeBlanc, J.R. Stanley, A.M. Rubenchik, S.S. Wu, W.H. Lowdermilk

Abstract

Abstract The effect of rapid laser heating on the response of 7075-T6 aluminum has been characterized using 3-D digital image correlation and a series of thermocouples. The experimental results indicate that as the samples are held under a constant load, the heating from the laser profile causes non-uniform temperature and strain fields, and the strain-rate increases dramatically as the sample nears failure. Simulations have been conducted using the LLNL multi-physics code ALE3D, and compared to the experiments. The strength and failure of the material was modeled using the Johnson–Cook strength and damage models. In order to capture the response, a dual-condition criterion was utilized which calibrated one set of parameters to low temperature quasi-static strain rate data, while the other parameter set is calibrated to high temperature high strain rate data. The thermal effects were captured using temperature dependent thermal constants and invoking thermal transport with conduction, convection, and thermal radiation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Additive Manufacturing Materials and Processes · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Stress–strain curves for stainless steel at elevated temperatures10.1016/j.engstruct.2005.07.005 ↗
2. Fire design model for structural steel S355 based upon transient state tensile test results10.1016/S0143-974X(97)00018-7 ↗
3. Constitutive model for aluminum alloys exposed to fire conditions10.1007/s11661-008-9470-0 ↗
4. Tensile instability and deformation behavior of rapidly heated metals in a constant-load environment10.1007/BF01184337 ↗
5. Moosbrugger · 2002
6. Hot compressive deformation behavior of 7075 Al alloy under elevated temperature10.1007/s10853-011-5904-y ↗
7. Mechanical properties, corrosion behaviors and microstructures of 7075 aluminium alloy with various aging treatments10.1016/S1003-6326(08)60130-2 ↗
8. The strain rate and temperature dependence of the dynamic impact properties of 7075 aluminum alloy10.1016/S0924-0136(99)00465-3 ↗
9. Image correlation applied to single crystal plasticity experiments and comparison to strain gage data10.1111/j.1747-1567.2006.00060.x ↗
10. Nichols · 2013
11. Temperature-dependent 780-nm laser absorption by engineering grade aluminum, titanium, and steel alloy surfaces10.1117/1.OE.53.12.122506 ↗
12. US Department of Defense · 1998
13. G.R. Johnson, W.H. Cook, in: Proceedings of the 7th International Symposium on Ballistics, vol. 21, 1983, pp. 541–547.
14. Dislocation mechanics based constitutive relations for material dynamics calculations10.1063/1.338024 ↗
15. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures10.1016/0013-7944(85)90052-9 ↗
16. M. Tang, et al., MIDAS (Material Implementation Database, and Analysis Source): A Comprehensive Resource of Material Properties, in: LLNL-PROC- 464065, 2010.
17. Microstructures of the commercial 7075 Al alloy in the T651 and T7 tempers10.1007/BF02662363 ↗
18. Plastic deformation of 2024-T351 aluminum plate over a wide range of loading conditions10.1016/j.ijsolstr.2013.02.006 ↗
19. N. Brar, et al., Constitutive model constants for Al7075-T651 and Al7075-T6, in: AIP Conference Proceedings, vol. 1195, 2009, p. 945.10.1063/1.3295300 ↗