Effect of Ti addition on the glass forming ability, crystallization, and plasticity of (Zr64.13Cu15.75Ni10.12Al10)100−xTix bulk metallic glasses
Source abstract
Abstract
Abstract A series of (Zr64.13Cu15.75Ni10.12Al10)100−xTix (x=0–7) bulk metallic glasses were prepared by water-cooled copper mold casting method. The glass forming ability, crystallization behavior, and plasticity of the (Zr64.13Cu15.75Ni10.12Al10)100−xTix alloys with different Ti contents were studied. The reduced glass transition temperature increases with Ti addition and a maximum value of 0.562 is achieved at x=5, indicating that the glass forming ability increases with Ti addition. Compared with that of one crystallization step for the sample without Ti addition, the Ti (x≥2) containing alloys exhibit a two-step crystallization behavior. In addition, the initial crystallization temperature decreases from 744 to 684 K as x increases from 0 to 7. Icosahedral quasicrystal phase was found to precipitate in the amorphous matrix in the first crystallization step, implying that strong icosahedral short-range order may exist in the Ti (x≥2) containing alloys. Moreover, the (Zr64.13Cu15.75Ni10.12Al10)100−xTix bulk metallic glasses exhibit excellent plasticity, i.e., a plastic engineering strain in compression larger than 80% for x≤6.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Greer · Science · 1995 · 267 · 194710.1126/science.267.5206.1947 ↗
2. Johnson · MRS Bull. · 1999 · 24 · 4210.1557/S0883769400053252 ↗
3. Wang · Mater. Sci. Eng. R · 2004 · 44 · 4510.1016/j.mser.2004.03.001 ↗
4. Steif · Acta Metall. · 1982 · 30 · 44710.1016/0001-6160(82)90225-5 ↗
5. Bei · Phys. Rev. Lett. · 2006 · 96 · 10550310.1103/PhysRevLett.96.105503 ↗
6. Pan · Acta Mater. · 2011 · 59 · 514610.1016/j.actamat.2011.04.047 ↗
7. Hays · Phys. Rev. Lett. · 2000 · 84 · 290110.1103/PhysRevLett.84.2901 ↗
8. Bae · Appl. Phys. Lett. · 2003 · 83 · 231210.1063/1.1611622 ↗
9. Yu · Mater. Sci. Eng. A · 2008 · 485 · 110.1016/j.msea.2007.07.062 ↗
10. Kim · Appl. Phys. Lett. · 2006 · 88 · 05191110.1063/1.2171472 ↗
11. Wang · Prog. Mater Sci. · 2007 · 52 · 54010.1016/j.pmatsci.2006.07.003 ↗
12. Liu · Intermetallics · 2005 · 13 · 41510.1016/j.intermet.2004.07.034 ↗
13. Inoue · Acta Mater. · 2000 · 48 · 27910.1016/S1359-6454(99)00300-6 ↗
14. Xie · J. Alloy. Compd. · 2009 · 480 · L3710.1016/j.jallcom.2009.02.075 ↗
15. Liu · Science · 2007 · 315 · 138510.1126/science.1136726 ↗
16. Gong · J. Alloy. Compd. · 2012 · 536 · 2610.1016/j.jallcom.2012.04.048 ↗
17. Ma · Mater. Sci. Eng. A · 2013 · 563 · 11210.1016/j.msea.2012.11.036 ↗
18. Chen · Phys. Rev. Lett. · 2008 · 100 · 07550110.1103/PhysRevLett.100.075501 ↗
19. Inoue · Mater. Trans. JIM · 1995 · 36 · 142010.2320/matertrans1989.36.1420 ↗
20. Qiang · J. Non-Cryst. Solids · 2008 · 354 · 205410.1016/j.jnoncrysol.2007.11.002 ↗
21. Ma · Appl. Phys. Lett. · 2005 · 87 · 17191410.1063/1.2115074 ↗
22. Xing · Appl. Phys. Lett. · 2000 · 77 · 197010.1063/1.1313255 ↗
23. Mattern · Acta Mater. · 2002 · 50 · 30510.1016/S1359-6454(01)00341-X ↗
24. Lu · Scr. Mater. · 2000 · 42 · 66710.1016/S1359-6462(99)00417-0 ↗
25. Bancel · Phys. Rev. Lett. · 1985 · 54 · 242210.1103/PhysRevLett.54.2422 ↗