X-ray diffraction study of microstructural changes during fatigue damage initiation in steel pipes
Source abstract
Abstract
The present work aims to evaluate the microstructural mechanisms associated with the initiation of fatigue damage in steels used in the petroleum industry. Microdeformations and residual stresses (macrostresses) are evaluated by X-ray diffraction in real time during alternating bending fatigue tests performed on samples taken from an API 5L X60 grade steel pipe. Microdeformations are evaluated from measurements of the full width at half maximum (FWHM) of the diffraction peak and residual stresses are estimated from the peak displacement. The evolution of microdeformations shows three regular successive stages of changes. The amplitude of variation of each stage is intensified with increasing stress amplitude, while the duration is reduced. A similar evolution is found for residual stresses, whose stages of changes have nearly the same durations as those of microdeformations. Changes in density and distribution of dislocations are observed by transmission electron microscopy combined with the technique of focused ion beam. To understand the role of the initial structure, fatigue tests on annealed samples are performed under the same test conditions. Again, three stages of changes are observed, but with an increase in microdeformations instead of a decrease during the first stage due to the initial state of the dislocation network. The results are very encouraging for the consideration of microstructural changes measured by X-ray diffraction in the development of a future indicator of fatigue damage initiation in API 5L X60 grade steel pipes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Material Properties and Failure Mechanisms · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. D. Lyons, Western European Cross-Country Oil Pipelines 30-Year Performance Statistics, Report No. 1/02, CONCAWE, 2002.
2. Paulson · 2005
3. Cunha · Fatigue Fract. Eng. Mater. Struct. · 2009 · 32 · 96110.1111/j.1460-2695.2009.01396.x ↗
4. Pinheiro · Int. J. Fatigue · 2009 · 31 · 96210.1016/j.ijfatigue.2008.09.006 ↗
5. American Petroleum Institute API Specification 5L, 42nd ed., 2004.
6. Paris · J. Basic Eng. · 1963 · 85 · 52810.1115/1.3656900 ↗
7. DNV, Fatigue Design of Offshore Steel Structures, Recommended Practice DNV-RP-C203, Høvik, Norway, 2008.
8. Ji · Scr. Metall. Mater. · 1990 · 24 · 154710.1016/0956-716X(90)90430-O ↗
9. Lesage · 1994
10. Magnin · Rev. Phys. Appl. · 1984 · 19 · 46710.1051/rphysap:01984001907046700 ↗
11. Liaw · Scr. Mater. · 2000 · 42 · 38910.1016/S1359-6462(99)00358-9 ↗
12. Luxemburger · Ultrasonics · 2002 · 40 · 79710.1016/S0041-624X(02)00212-3 ↗
13. Ogi · Metall. Mater. Trans. A · 2000 · 31 · 112110.1007/s11661-000-0107-1 ↗
14. Gilanyi · Fusion Eng. Des. · 1998 · 42 · 48510.1016/S0920-3796(98)00180-X ↗
15. Palma · Int. J. Fatigue · 2005 · 27 · 65910.1016/j.ijfatigue.2004.11.005 ↗
16. Benrabah · Wear · 1999 · 224 · 26710.1016/S0043-1648(98)00342-1 ↗
17. Y. Isobe, A. Kamimura, K. Furuta, E. Ikuta, K. Aoki, F. Nakayasu, Fatigue damage characterization in alloy 718, superalloys 718, 625, 706 and various derivatives, in: E.A. Loria (Ed.), 1994, pp. 607–618.10.7449/1994/Superalloys_1994_607_618 ↗
18. Scholtes · 2000
19. Rai · Int. J. Press. Vessels Pip. · 1999 · 76 · 27510.1016/S0308-0161(98)00140-9 ↗
20. Vijayan · Bull. Mater. Sci. · 1988 · 10 · 20510.1007/BF02744065 ↗
21. Maeder · NDT Int. · 1981 · 14 · 23510.1016/0308-9126(81)90076-6 ↗
22. N. Broll, Caractérisation de Solides Cristallisés par Diffraction X, PE 1080, Techniques de l’Ingénieur, Traité Analyse et Caractérisation, 1996.10.51257/a-v2-p1080 ↗
23. Quesnel · Mater. Sci. Eng. · 1978 · 36 · 20710.1016/0025-5416(78)90073-3 ↗
24. Nikitin · Mater. Sci. Eng. A · 2007 · 465 · 17610.1016/j.msea.2007.02.004 ↗
25. Krauss · J. Mater. Sci. Technol. · 2004 · 20 · 9310.1179/026708304225011234 ↗
26. Ungár · Mater. Sci. Eng. A · 2001 · 309–310 · 1410.1016/S0921-5093(00)01685-3 ↗
27. Hoffmann · Mater. Sci. Eng. · 1997 · A234-236 · 70710.1016/S0921-5093(97)00272-4 ↗
28. Kerber · Rev. Adv. Mater. Sci. · 2005 · 10 · 427
29. ASTM International · 2004
30. Tabor · J. Inst. Met. · 1951 · 79 · 1
31. Cahoon · Metall. Trans. · 1972 · 3 · 304010.1007/BF02652880 ↗
32. Moteff · Metall. Trans. A · 1975 · 6A · 110110.1007/BF02661365 ↗
33. Schenck · 1971
34. AFNOR–Association Française de Normalisation 1999. Essais non destructifs – Méthodes d’essais pour l’analyse des contraintes résiduelles par diffraction des rayons X, XP A 09-285.
35. Shigley · 2001
36. Graham · 1968
37. ABAQUS · 2008
38. C.S. Vianna, Mechanical behavior of the API 5L X-60 Steel with and without hydrogen. M. Sc. Thesis, COPPE/UFRJ, Rio de Janeiro, Brazil, 2005.
39. Dieter · 1988
40. Chicot · 2003
41. Dalaei · Procedia Eng. · 2010 · 2 · 61310.1016/j.proeng.2010.03.066 ↗
42. Dalaei · Mater. Sci. Eng. A · 2011 · 528 · 100810.1016/j.msea.2010.09.050 ↗
43. P. Juijerm, I. Altenberger, Cyclic deformation behaviour and its optimization at elevated temperature, in: Tibor Kvackaj (Ed.), Aluminium Alloys, Theory and Applications, InTech, 2011, pp. 183–198.10.5772/13898 ↗
44. Stability of Residual Stresses
45. Lemaitre · Matériaux et Techniques · 1982 · 29710.1051/mattech/198270090297 ↗
46. Holzapfel · Mater. Sci. Eng. A · 1998 · 248 · 910.1016/S0921-5093(98)00522-X ↗
47. Wick · Mater. Sci. Eng. A · 2000 · 293 · 19110.1016/S0921-5093(00)01035-2 ↗
48. Cherif · J. Mater. Eng. Perform. · 2010 · 19 · 28210.1007/s11665-009-9445-3 ↗
49. Nikitin · Mater. Sci. Eng. A · 2008 · 491 · 29710.1016/j.msea.2008.03.034 ↗
50. Nikitin · Scr. Mater. · 2008 · 58 · 23910.1016/j.scriptamat.2007.09.045 ↗
51. Nikitin · Scr. Mater. · 2004 · 50 · 134510.1016/j.scriptamat.2004.02.012 ↗