Failure competition behavior of 9Cr/617 dissimilar welded joint during LCF test at elevated temperature
Source abstract
Abstract
Abstract Failure competition behavior was found after low cycle fatigue (LCF) tests for the dissimilar welded joint between modified 9Cr steel and nickel-based alloy 617 at 600°C. The failure location shifted from base metal (BM) and fine grain heat affected zone (FGHAZ) on the 9Cr steel side to steel/Ni interface with the increase of the strain amplitude. At higher strain amplitude, strain concentration at the steel-Ni interface resulted in steel-Ni interface failure due to the differences in deformability. With the decreasing of the strain amplitude, the lower degree of transformation from lath to cell structure in coarse grain heat affected zone (CGHAZ) caused the competition between interface and FGHAZ failure. FGHAZ failure was governed by higher fraction of dynamic recrystallization (DRX) and formation of cell structure in FGHAZ. DRX was found promoting the formation of cell structure in FGHAZ, thus contributing to its lowest microhardness after LCF tests. As the strain amplitude further decreased, the reduction of DRX fraction made the formation of cell structure dominate the failure. The competing behavior between FGHAZ and BM led to the presence of case for BM failure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. An analytical framework for modelling intermetallic compound (IMC) formation and optimising bond strength in aluminium‐steel welds10.1002/mdp2.57 ↗
2. Progress in solid state joining of metals and alloys10.1016/j.prostr.2019.08.105 ↗
3. Interfacial microstructure and mechanical property of Ti6Al4V/A6061 dissimilar joint by direct laser brazing without filler metal and groove10.1016/j.msea.2012.09.044 ↗
4. Research and development of heat-resistant materials for advanced USC power plants with steam temperatures of 700 C and above10.15302/J-ENG-2015031 ↗
5. Microstructural evolution of a Ni-based superalloy (617B) at 700 °C studied by electron microscopy and atom probe tomography10.1016/j.actamat.2011.11.020 ↗
6. Evolution of carbides and its characterization in HAZ during NG-TIG welding of Alloy 617B10.1016/j.matchar.2017.06.021 ↗
7. Microstructure and mechanical performance of welded joint between a novel heat-resistant steel and Inconel 617 weld metal10.1016/j.matchar.2018.03.012 ↗
8. Interfacial failure in dissimilar weld joint of high boron 9% chromium steel and nickel-based alloy under high-temperature creep condition10.1016/j.msea.2017.04.012 ↗
9. Microstructures and microhardness at fusion boundary of 316 stainless steel/Inconel 182 dissimilar welding10.1016/j.matchar.2015.07.018 ↗
10. Low-cyclic fatigue behavior of modified 9Cr–1Mo steel at elevated temperature10.1016/j.msea.2014.02.076 ↗
11. Cyclic damage behavior of Sanicro 25 alloy at 700° C: dispersed damage and concentrated damage10.1016/j.ijplas.2018.12.010 ↗
12. Exploring the hybrid metal extrusion and bonding process for butt welding of Al–Mg–Si alloys10.1007/s00170-018-2234-0 ↗
13. Mechanical behavior of gas metal arc AA6082-T6 weldments10.1016/j.prostr.2019.08.187 ↗
14. Recent advances in solid-state joining of aluminum
15. A review of competing modes fatigue behavior10.1016/j.ijfatigue.2009.04.018 ↗
16. Very high‐cycle fatigue behaviour of shot‐peened high‐carbon–chromium bearing steel10.1046/j.1460-2695.2002.00567.x ↗
17. Fatigue deformation in a polycrystalline nickel base superalloy at intermediate and high temperature: competing failure modes10.1016/j.actamat.2018.03.035 ↗
18. Competing fatigue failure behaviors of Ni-based superalloy FGH96 at elevated temperature10.1016/j.msea.2016.05.034 ↗
19. The effects of microstructure and porosity on the competing fatigue failure mechanisms in powder metallurgy Ti-6Al-4V10.1016/j.ijfatigue.2018.07.006 ↗
20. Crystal plasticity assessment of inclusion-and matrix-driven competing failure modes in a nickel-base superalloy10.1016/j.actamat.2019.07.024 ↗
21. A comparative study on the cyclic plasticity and fatigue failure behavior of different subzones in CrNiMoV steel welded joint10.1016/j.ijmecsci.2018.10.026 ↗
22. Ceep-fatigue evaluation method for Mod. 9Cr-1Mo weldment
23. Transition and fracture shift behavior in LCF test of dissimilar welded joint at elevated temperature10.1016/j.jmst.2017.06.015 ↗
24. Microstructural and hardness investigations on a dissimilar metal weld between low alloy steel and Alloy 82 weld metal10.1016/j.matchar.2016.09.033 ↗
25. Tempering effect on the fusion boundary region of alloy 625 weld overlay on 8630 steel10.1007/s40194-018-0560-3 ↗
26. Transition of creep damage region in dissimilar welds between Inconel 740H Ni-based superalloy and P92 ferritic/martensitic steel10.1016/j.matchar.2018.02.039 ↗
27. Low cycle fatigue behavior of modified 9Cr–1Mo steel at room temperature10.1016/j.msea.2015.11.060 ↗
28. Deformation behavior of modified 9Cr–1Mo steel under low cycle fatigue at 600° C10.1016/j.matchar.2017.06.024 ↗
29. Low cycle fatigue behavior of modified 9Cr-1Mo steel at 300° C10.1016/j.msea.2017.12.105 ↗
30. Influence of temperature on the low cycle fatigue behaviour of a modified 9Cr–1Mo ferritic steel10.1016/S0142-1123(02)00035-X ↗
31. Effects of strain rate on low cycle fatigue behaviors of high-strength structural steel10.1016/S1006-706X(13)60126-0 ↗
32. Low cycle fatigue behavior and microstructure evolution of a novel 9Cr–3W–3Co tempered martensitic steel at 650° C10.1016/j.msea.2018.06.071 ↗
33. Low-cycle fatigue behaviors of a new type of 10% Cr martensitic steel and welded joint with Ni-based weld metal10.1016/j.ijfatigue.2016.03.003 ↗
34. Characterization on the gradient microstructure near the fusion interface of dissimilar metal between high Cr heat-resistant steel and Ni-based Alloy 61710.1016/j.matchar.2019.03.001 ↗
35. Low cycle fatigue, deformation and fracture behavior of Inconel 617 alloy10.1016/j.msea.2019.138286 ↗
36. Fracture location transition in constant load tests of a NiCrMoV steel welded joint10.1016/j.matdes.2019.108072 ↗
37. Correlation of yield strength and tensile strength with hardness for steels10.1007/s11665-008-9225-5 ↗
38. Microstructure and local mechanical properties of a dissimilar metal welded joint with buttering layer in steam turbine rotor10.1016/j.msea.2018.12.018 ↗
39. Fatigue damage assessment of SUS316L using EBSD and PALS measurements10.1016/j.matchar.2019.05.038 ↗
40. Characterization of microstructural damage due to low-cycle fatigue by EBSD observation10.1016/j.matchar.2009.07.003 ↗
41. Microstructure, local mechanical properties and stress corrosion cracking susceptibility of an SA508-52M-316LN safe-end dissimilar metal weld joint by GTAW10.1016/j.msea.2016.05.101 ↗
42. Microstructure of a domestically fabricated dissimilar metal weld joint (SA508-52M-309L-CF8A) in nuclear power plant10.1016/j.matchar.2018.12.011 ↗
43. Microstructure evolution of fine-grained heat-affected zone of Gr.92 steel welded joint during creep10.1007/s11661-019-05245-6 ↗
44. Texture, local misorientation, grain boundary and recrystallization fraction in pipeline steels related to hydrogen induced cracking10.1016/j.msea.2014.10.009 ↗
45. Novel low-cost magnesium alloys with high yield strength and plasticity10.1016/j.msea.2019.138332 ↗
46. Low cycle fatigue behavior of a 10% Cr martensitic steel at 600 C10.2355/isijinternational.ISIJINT-2015-336 ↗
47. Influence of dynamic strain aging pre-treatment on the low-cycle fatigue behavior of modified 9Cr–1Mo steel10.1016/j.ijfatigue.2012.07.011 ↗
48. Low cycle fatigue behavior and microstructural evolution of modified 9Cr–1Mo ferritic steel10.1016/j.msea.2006.07.146 ↗
49. Microstructural evolutions and cyclic softening of 9% Cr martensitic steels
50. Isothermal and thermomechanical fatigue studies on a modified 9Cr–1Mo ferritic martensitic steel10.1016/j.msea.2012.06.021 ↗