journal article·2018-10

An optimization criterion for fatigue strength of metallic materials

B. Wang, P. Zhang, R. Liu, Q.Q. Duan, Z.J. Zhang, X.W. Li, Z.F. Zhang

Publisher page

Abstract

Abstract In this study, a criterion for optimizing the fatigue strength of metallic materials is proposed, and verified by many experimental results. The strategy for optimizing the fatigue strength is to continuously increase the ultimate tensile strength (UTS) under the condition of keeping certain work-hardening abilities. It is found that the relationship between the true UTS and true uniform elongation can be described by two straight lines, and the optimal fatigue strength can be obtained at the point where the two straight lines intersect with each other. This study has great guiding significance for economizing time and money to optimize the fatigue strength of metallic materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. General relation between tensile strength and fatigue strength of metallic materials10.1016/j.msea.2012.11.103 ↗
2. Frorrest · 1962
3. Murakami · 2002
4. Lee · 2005
5. Formation of the science of fatigue of metals. Part 1. 1825–187010.1007/s11003-006-0132-3 ↗
6. Relations between fatigue strength and other mechanical properties of metallic materials10.1111/ffe.12158 ↗
7. Pang · 2013
8. Suresh · 1991
9. R. Liu, P. Zhang, B. Wang, Y.Z. Tian, Z.J. Zhang, Z.F. Zhang, Conservation relation between tensile and fatigue strengths, Acta Mater., 2018 (In preparation).
10. Microscopic mechanisms contributing to the synchronous improvement of strength and plasticity (SISP) for TWIP copper alloys10.1038/srep09550 ↗
11. Revealing the deformation mechanisms of Cu-Al alloys with high strength and good ductility10.1016/j.actamat.2016.03.015 ↗
12. Mechanical properties and tensile fracture mechanisms of Fe-Mn-(Al, Si) TRIP/TWIP steels with different ferrite volume fractions10.1002/adem.201500108 ↗
13. Enhanced cyclic deformation responses of ultrafine-grained Cu and nanocrystalline Cu-Al alloys10.1016/j.actamat.2014.04.053 ↗
14. Cyclic softening behaviors of ultra-fine grained Cu-Zn alloys10.1016/j.actamat.2016.09.020 ↗
15. Strength, damage and fracture behaviors of high-nitrogen austenitic stainless steel processed by high-pressure torsion10.1016/j.scriptamat.2014.09.016 ↗
16. Effects of stacking fault energy on the thermal stability and mechanical properties of nanostructured Cu-Al alloys during thermal annealing10.1557/jmr.2010.39 ↗
17. Strain hardening, strain rate sensitivity, and ductility of nanostructured metals10.1016/j.msea.2003.10.214 ↗
18. Dong · 2015
19. Ageing behaviour of an Fe-20Ni-1.8Mn-1.6Ti-0.59Al (wt%) maraging alloy: clustering, precipitation and hardening10.1016/j.actamat.2004.08.018 ↗
20. Optimizing the fatigue strength of 18Ni maraging steel through ageing treatment10.1016/j.msea.2017.09.107 ↗
21. Instabilities and ductility of nanocrystalline and ultrafine-grained metals10.1016/S1359-6462(03)00396-8 ↗
22. An · 2012
23. Work hardening of polycrystalline Cu with nanoscale twins10.1016/j.scriptamat.2011.12.046 ↗
24. Grain boundary-mediated plasticity in nanocrystalline nickel10.1126/science.1098741 ↗
25. Grain size dependence of tensile properties in ultrafine-grained Cu with nanoscale twins10.1016/j.scriptamat.2010.10.015 ↗
26. Microstructural evolution and shear fracture of Cu-16at% Al alloy induced by equal channel angular pressing10.1016/j.msea.2010.03.101 ↗
27. Deformation in nanocrystalline metals10.1016/S1369-7021(06)71494-8 ↗
28. Exceptional high fatigue strength in Cu-15at% Al alloy with moderate grain size10.1038/srep27433 ↗
29. Modeling tensile response and flow localization effects in selected copper alloys10.1016/j.jnucmat.2004.04.027 ↗
30. Plastic instability in polycrystalline metals after low temperature irradiation10.1016/j.actamat.2003.12.023 ↗
31. Strain hardening and plastic instability properties of austenitic stainless steels after proton and neutron irradiation10.1016/S0022-3115(01)00651-1 ↗
32. High-cycle fatigue properties and damage mechanisms of pre-strained Fe-30Mn-0.9C twinning-induced plasticity steel10.1016/j.msea.2016.10.043 ↗
33. Fatigue strength plateau induced by microstructure inhomogeneity10.1016/j.msea.2017.07.026 ↗