journal article·2018-05Open access

The influence of the microstructure morphology of two phase Ti-6Al-4V alloy on the mechanical properties of diffusion bonded joints

E. Yakushina, A. Reshetov, I. Semenova, V. Polyakova, A. Rosochowski, R. Valiev

Abstract

The influence of ultra fine grained (UFG) and coarse grained (CG) microstructure of the titanium alloy Ti-6Al-4V on the strength of a diffusion bonded (DB) joint was studied using a laboratory DB fixture and a new shear test rig. The DB process was carried out at 725 °C and 825 °C during 2 and 4 h in a vacuum furnace. Coarsening of grain structure resulting from different DB cycles was quantified. The chain pores were observed at 725 °C for both microstructure conditions bonded during 2 h. The increase of bonding time up to 4 h leads to subsequent elimination of the pores. The UFG samples bonded at 725 °C showed a higher level of the shear strength than CG samples for both bonding times. The CG material demonstrated the highest shear strength after 4 h of DB bonding at 825 °C. The increase of the creep deformation of UFG samples when compared to the CG condition was observed as a result of DB at of 725 °C during 4 h.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. O. Fowler, V. Richardson, A Method of Manufacturing an Article by Superplastic Forming and Diffusion Bonding. Europe Patent 0 568 201, B21D 53/78, 1993.
2. The use of nanostructured materials and nanotechnologies for the elaboration of hollow structures10.1134/S1995078010010118 ↗
3. M.W. Turner, I.J. Andrew, Proceedings of the 4th European Conference on Superplastic Forming, in 39–46, 2005.
4. Processing properties of nano- and submicro-crystalline Ti–6Al–4V titanium alloy10.1016/j.msea.2008.02.060 ↗
5. Lowering the heat - the development of reduced SPF temperature titanium alloys for aircraft production10.4028/www.scientific.net/MSF.447-448.233 ↗
6. Mechanical behaviour and superplasticity of severe plastic deformation processed non crystalline Ti-6Al-4V alloy10.1016/S0921-5093(00)01338-1 ↗
7. o Enhanced superplasticity in Ti-6Al-4V alloy processed by severe plastic deformation10.1016/S1359-6462(00)00496-6 ↗
8. o equal channel angular extrusion from macro-mechanics to structure formation10.1016/S0924-0136(01)01037-8 ↗
9. Nanostructuring of metals by severe plastic deformation for advanced properties10.1038/nmat1180 ↗
10. Evgenia Yakushina, Aleksey Reshetov, Andrzej Rosochowski, Optimisation of diffusion bonding parameters of Ti alloys through the structure and surface conditions., Materials Science Forum, Vols. Vol. 783-786, no. 05, pp. 2845–2850, 1. Yakushina, Evgenia; Reshetov, Aleksey; Rosochowski, Andrzej / Optimisation of diffusion bonding parameters of Ti alloys through the structu2014.10.4028/www.scientific.net/MSF.783-786.2845 ↗
11. Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys10.1016/S0921-5093(97)00778-8 ↗
12. Phase transformations and microstructure development in multicomponent titanium alloys containing Al, Mo, V and Cr
13. HIgh-cycle fatigue behaviour of an ultrafine-grained Ti-6Al-4V alloy processed by ECAP and extrusion10.1002/adem.201500630 ↗
14. Microstructure evolution during alpha-beta heat treatment of Ti-6Al-4V10.1007/s11661-003-0300-0 ↗
15. Method of thermomechanical treatment of two-phase titanium alloys. Russia Patent No 2.285.740 RU C1, 20 October, 2006.
16. TOWARDS enhancement OF properties OF UFG metals AND alloys BY grain boundary engineering using SPD processing
17. Average size of grains in the VT6 titanium alloy and the choice of the rational scheme for the integral process of superplastic forming/welding under pressure
18. Mechanism for the formation of a solid state com pound in the superplastic state
19. Diffusion bonding aeroengine components10.14429/dsj.38.5877 ↗
20. Fabrication of titanium parts by massive diffusion bonding10.1016/j.jmatprotec.2007.11.183 ↗
21. Grain boundaries in ultrafine grained materials processed by severe plastic deformation and related phenomena10.1016/j.msea.2012.01.080 ↗